2008 FIAT BRAVO Switch off

QUICK
GUIDE
12
RADIO
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
FUNCTIONS AND
ADJUSTMENTS
SELECTING RADIO/CD/
CD CHANGER
Pressing briefly and repeatedly button SRC
it is possible to select the following func-
tions in sequence:
– TUNER (Radio)
– CD (Compact Disc)
– CDC (CD Changer) (only if the CD
Changer is connected).
After changing sound source, the display
will show the current function selected:
TUNER (Radio), CD (Compact Disc),
CDC (CD Changer).
Functions not available (e.g. “CD” if a
Compact Disc is not inserted) are disabled
automatically.SOUND SOURCE MEMORY
FUNCTION
If while listening to a CD another function
is selected (e.g.: the radio), playing is
stopped and when the CD mode is re-
sumed, it starts again from the point in
which it was stopped.
If while listening to the radio another func-
tion is selected, when the Radio mode is
resumed, it is tuned to the last station se-
lected.
VOLUME ADJUSTMENT
Adjust volume through button/knob
ON/OFF.
Turn the knob clockwise to increase vol-
ume, turn the knob counter-clockwise to
lower the volume.
The display will show: “VOLUME 00” …
“VOLUME 12” TURNING THE
SOUND SYSTEM ON
The sound system is switched on pressing
the button/knob ON/OFF. The turning on
of the sound system radio can be con-
nected to the car ignition: turning the ig-
nition key to MAR, the radio turns on;
turning the key to STOP the radio turns
off (see paragraph “Setting the AUTO
function” is section “Radio”).
If the sound system is turned on with the
ignition key at STOP, it will turn off auto-
matically after about 20 minutes.
TURNING THE
SOUND SYSTEM OFF
To turn the sound system off keep but-
ton/knob ON/OFF pressed.
FF F
U U
N N
C C
T T
I I
O O
N N
S S
A A
N N
D D
A A
D D
J J
U U
S S
T T
M M
E E
N N
T T
S S

13
QUICK
GUIDE
RADIO
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
FUNCTIONS AND
ADJUSTMENTS
SOFT MUTE FUNCTION
When the Mute function is turned on/off
the volume will gradually increase or de-
crease (Soft Mute function).
TONE ADJUSTMENT
(bass/treble)
Proceed as follows:
– briefly and repeatedly press button AU-
DIO
DSPuntil the display shows “BASS”
or “TREBLE”.
– turn the knob ON/OFF clockwise to in-
crease bass or treble tones or turn it
counter-clockwise to decrease.
The display will show for a few seconds
the bass/treble levels (–10 to +10).
A few seconds after the last setting the dis-
play will resume the radio main screen.BALANCE ADJUSTMENT
Proceed as follows:
– briefly and repeatedly press button AU-
DIO
DSPuntil the display shows “BAL-
ANCE”
– turn the button/knob ON/OFF clock-
wise to increase the sound from the right
speakers or turn it counter-clockwise to
increase the sound from the left speakers.
The display will show for a few seconds
the balance levels, from Í+10 to È+10
(È= right, Í= left). A few seconds af-
ter the last setting the display will resume
the radio main screen. MUTE FUNCTION
(turning off the volume
completely)
To switch the Mute function on, press
briefly the button MUTE. Volume will
gradually lower (Soft Mute function) and
the display will show the current sound
source selected followed by the Mute (e.g.
“TUNER MUTE” when the Radio is se-
lected).
To switch the Mute function off, press
briefly the button MUTE again. Volume
will gradually become louder (Soft Mute
function) returning to the value set before
switching on the Mute function.
Turning the button/knob ON/OFF the
sound level changes; the Mute function will
however stay on. Press the button MUTE
again to turn it off.
When the Mute function is on, all the oth-
er functions can be used. If a traffic an-
nouncement arrives with the TA function
on, the traffic message will ignore the
Mute function.

QUICK
GUIDE
14
RADIO
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
FUNCTIONS AND
ADJUSTMENTS
FADER ADJUSTMENT
Proceed as follows:
– briefly and repeatedly press button AU-
DIO
DSPuntil the display shows “FADE”
– turn the button/knob ON/OFF clock-
wise to increase the sound from the front
speakers or counter-clockwise to increase
the sound from the rear speakers.
A few seconds after the last setting the dis-
play will resume the radio main screen.LOUDNESS FUNCTION
The Loudness function improves the
sound volume when listening at low lev-
el, increasing the basses and trebles. When
volume is at max. the Loundness function
is excluded.
To switch the function on/off, open the
MENU by pressing briefly button MENU
RDSand scroll it. Function condition (on
or off) is shown on the display by message
“LOUDNESS: ON” or “LOUDNESS:
OFF”, that can be selected by means of
buttons Èor Í.
TELEPHONE PROVISION
If the hands-free kit is installed on the car,
when a phone call is received the volume
set will be the one selected for the
PHONE function in the menu, if required
it can be muted OFF. PRESET/XX EQ SET*/ CLASSIC/
ROCK/JAZZ FUNCTION
(equalizer on/off)
To turn the equalizer on press for long
button AUDIO
DSPand turn the but-
ton/knob ON/OFF to select one of the
following settings:
– “PRESET” (predefined equalizer setting);
– “CLASSIC” (predefined equalizer setting
for best playing of classic music);
– “ROCK” (predefined equalizer setting
for best playing of rock music);
– “JAZZ” (predefined equalizer setting for
best playing of jazz music);
– “CUSTOMER” (setting of the 5 equal-
izer bands that can be changed by the
user)
Press repeatedly button Èor Íto select
the required band and then use the but-
ton/knob ON/OFF to increase/decrease
the level in the selected frequency band.

QUICK
GUIDE
18
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
When the signal of the RDS station tuned
weakens, the following two cases may oc-
cur:
– With “AF SWITCHING: ON” the RDS
system activates automatic tuning of the
optimum frequency of the station chosen,
with the stations enabled, therefore the
radio is automatically tuned to the station
with the strongest signal that is broad-
casting the same programme. During the
journey it will thus be possible to contin-
ue listening to the station chosen with-
out having to change the frequency when
changing area. Of course, the station be-
ing listened to must be receivable in the
area the car is crossing.
– With “AF SWITCHING: OFF” the ra-
dio will not tune the strongest station au-
tomatically and it will have to be found
manually using the tuner buttons. AF FUNCTION
(alternative frequency search)
To turn the AF function on/off, press
briefly button AF
PTY. RDS name (if avail-
able) will stay on the display and if the
function is on the wording is shown.
– “AF SWITCHING: ON” = alternative
frequency search on
– “AF SWITCHING: OFF” = alternative
frequency search off.TA FUNCTION
(traffic information)
Certain stations in the FM band (in stor-
age blocks FM1, FM2, FM3 and FMAST)
are enabled to also broadcast information
about traffic conditions. During a traffic
bulletin, the message “TRAFFIC INFO”
will be displayed alternate with the cur-
rent one (e.g.: station name).
To turn the TA function on/off, press
briefly button TA. When the TA function
is on the display will show the message
“TA-ON”.
When the TA function is on, an incoming
traffic bulletin will stop temporarily the
current broadcasted programme or the
CD being played. Switching from the se-
lected station to the station broadcasting
traffic announcements is only possible if
connection for EON function is enabled.

QUICK
GUIDE
20
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
PTY setting
Press button AF
PTYfor over 2 seconds to
display the PTY code of the current sta-
tion. Select the required code by turning
the button/knob ON/OFF and then press
button Èor Íto start automatic seek-
ing of stations with the PTY code select-
ed. Automatic seek will stop automatical-
ly to the next station broadcasting the PTY
programme selected. The type of pro-
gramme will be displayed (e.g. “POP”) with
the word “PTY” flashing.
IMPORTANT If no station is broadcasting
the selected PTY, the last station will be
tuned and the PTY function is aborted.
PTY function deactivation
After entering the PTY mode, if no oper-
ation is performed within 10 seconds, the
radio returns to the mode active before
pressing the AF
PTYbutton and it will store
the last PTY code selected. MENU
MENU
RDSbutton options
To activate the Menu, press briefly the
button MENU
RDS.
In this way you open the first level Menu.
To open the second level menu keep the
MENU
RDSbutton pressed for over 2 sec-
onds.
To scroll the Menu options press repeat-
edly the MENU
RDSbutton.
First levelMenu options are the follow-
ing:
1 MANUAL TUNING SEEK on/off
2 CD Compression
3 Confirmation beep (BEEP)
4 Tuning sensitivity adjustment (SENS
DX/LO)
5 News programmes on/off (NEWS)
6 Automatic volume adjustment with car
speed (SVC)
7 Traffic announcements tuning (EON
TA)
8 Loudness on/off (LOUD- NESS)
9 CD naming (CD NAMING) (only in CD
Changer mode);
10 CD naming/track selection (TPM =
Track Program Memory)
Press buttons Èor Íto activate/deacti-
vate the function selected.Second levelMenu options are the fol-
lowing:
1 Time display of the current RDS station
(if available)
2 “Audio distortion clipper” on/off (AU-
DIO CLIP DETECT)
3 Max volume setting at switching on
(MAX VOLUME)
4 Telephone volume adjustment (PHONE)
5 AUTO setting selection which enables
to set radio turning on/off depending on
car ignition/switching off.
Use the button/knob ON/OFF to turn
on/off the function selected.
NOTE Each time you pass to next setting,
the previous one will be stored.

21
QUICK
GUIDE
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
AVAILABLE SETTINGS
First level Menu options
1 - TUNING SEEK
(manual tuning on/off)
This option enables to seek manually
(MANUAL) or automatically (AUTO) the
stations stored.
To switch between manual and automat-
ic seek use buttons Èor Í.
The display will show the current tuning
seek mode:
– “TUNING SEEK: AUTO”: automatic
seek on
– “TUNING SEEK: MANUAL”: manual
seek on.2 - CD Compression
This option enables to optimize the sound
level according to the music being played
by the CD.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “COMPRESSION: ON” = function on
– “COMPRESSION: OFF” = function off
3 - BEEP (confirmation beep)
The system provides the BEEP function ac-
tive (message “ROGER BEEP-ON” on the
display).
This function gives sound confirmation
(BEEP) when pressing buttons.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “ROGER BEEP: ON” = function on
– “ROGER BEEP: OFF” = function off.4 - SENS DX/LO
(tuning sensitivity adjustment)
With this function it is possible to change
the sensitivity of automatic station tun-
ing. When low sensitivity is set “SENSI-
TIVITY: LOCAL” only stations with ex-
cellent reception are sought; when high
sensitivity is set “SENSITIVITY: DIS-
TANT” all stations are sought. Therefore,
if the car is in an area with a considerable
number of stations and you want to
choose only those with a strong signal, set
to low sensitivity “SENSITIVITY: LOCAL”.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “SENSITIVITY: LOCAL” = low sensi-
tivity
– “SENSITIVITY: DISTANT” = high sen-
sitivity.

QUICK
GUIDE
22
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
5 - NEWS (new programmes on/off)
This function is similar to the TA function:
with FM station tuned and NEWS function
active if a news bulletin is broadcast, the
sound system will:
– set the same volume as for TA function,
if TUNER (Radio) is on;
– switch the current audio source (CD or
CD Changer) to TUNER (Radio) and set
the same volume as for TA function.
It is necessary that in TUNER mode (Ra-
dio), the radio is tuned to a FM station
broadcasting the NEWS code.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “NEWS: ON” = function on
– “NEWS: OFF” = function off6 - SVC (automatic volume
adjustment with car speed)
The SVC function makes it possible to au-
tomatically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the
noise level inside the passenger compart-
ment.
Press Èor Íto change the SVC setting,
from OFF to the gain level (1 to 7) se-
lected. High gain level values correspond
to high volume levels when the car speed
increases.
The display will show the current function
condition:
– “SPEED VOLUME OFF” = function off
– “SPEED VOLUME: +3” = function on
and gain level set.7 - EON TA DX/LO (traffic
announcements tuning sensitivity)
This function enables to change the re-
ception sensitivity of radio stations broad-
casting traffic announcements.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “TRAFFIC: LOCAL” = low sensitivity
– “TRAFFIC: DISTANT” = high sensitivi-
ty
8 - LOUDNESS (loudness on/off)
The Loudness function improves the
sound volume when listening at low lev-
el, increasing the basses and trebles.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “LOUDNESS: ON” = loudness on
– “LOUDNESS: OFF” = loudness off

QUICK
GUIDE
24
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
Second level menu options
1 - RDS (station time display)
This option makes it possible to display
the time of the current RDS station (if this
information is available).
2 - AUDIO CLIP DETECT
(“audio distortion clipper” on/off)
This function reduces automatically the ra-
dio output level when excessive distortion
is detected that could damage the speak-
ers.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “CLIP DETECT: ON” = function on
– “CLIP DETECT: OFF” = function off3 - MAX VOLUME (max. volume
setting at switching on)
This function can be used to set the max-
imum volume (from 10 to 33) that can be
set using the control.
Use the button/knob ON/OFF to adjust
the volume.
The display will show the set volume (e.g.:
“MAX VOLUME: 25”)
4 - PHONE
(phone volume adjustment)
This function makes it possible to set the
phone volume (from 1 to 3).
The display will show, as standard, the
message “PHONE LEVEL: OFF” (volume
set by the Manufacturer, corresponding to
max. level).
Use the button/knob ON/OFF to adjust
the volume to 3 different levels (PHONE
LEVEL 1 , PHONE LEVEL 2 and PHONE
LEVEL 3): the higher the number is, the
lower will be the phone volume.5 - AUTO (function setting)
With this function it is possible to set ra-
dio turning on/off depending on car igni-
tion/switching off or independent.
With this function on (radio is set to
switch off when the car is switched off),
it is however possible to switch on the ra-
dio.
With this function off, when switching off
the car the radio stays on.
Use buttons Èor Íto turn this function
on/off.
The display will show the current function
condition:
– “AUTO: ON” = function on
– “AUTO: OFF” = function off