607 *Technical data
Service products and capacities
6
Valid Mercedes-Benz oil specification
sheets:
Always refer to the following viscosity
chart for the proper viscosity grade
based on ambient temperature. Select
oil viscosity according to the lowest air
temperature expected before the next
oil change. This chart supersedes ALL previously
published viscosity charts.
For further information contact your au-
thorized Sprinter Dealer.Engine
MB sheet
Gasoline
M272
229.3, 229.31
229.5, 229.51
Diesel
OM642
228.51, 229.31,
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Castrol Syntec 5W-40
5W-40
229.3
Castrol Syntec 0W-30
European Formula
0W-30
229.5
Chevron Supreme
Synthetic Motor Oil
SAE 5W-40
5W-40
229.31
Fuchs Titan Cargo
Maxx SAE 10W-40
10W-
40
228.51
Fuchs Titan GT1 SAE
5W-30
5W-30
229.51
nf_BA.book Page 607 Friday, January 25, 2008 3:53 PM
617 *Technical data
Service products and capacities
6
BrakesUse brake fluid approved for Chrysler Vans LLC standard MB 331.0 and/or Chrysler Vans LLC material standard MS-9971, brake
fluid certified to DOT 4 Plus standards, that also maintains a minimum dry boiling point (ERBP) of 500 °F (260 °C), a minimum wet
boiling point (WERBP) of 356 °F (180 °C) and a maximum viscosity of 1500 mm
2/s, conforming to FMVSS 116 and ISO 4925.
Brake fluid
2 years
2
Intac B026E Dry boiling point: 500°F
(260°C)
Wet boiling point: 356°F
(180°C)
MOPAR
® MS-9971 Part No. 04549625AC or
equivalent
331.0
9971
1 Chrysler Vans LLC Material Standard-No.
2 Over the course of a brake fluid’s service life, its boiling point falls due to the continuous absorption of moisture from the atmosphere. If the boiling point
of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving on long downhill stretches).
This has a detrimental effect on braking efficiency, which could increase the stopping distance. This increases the risk of an accident. Have the brake fluid
renewed every 2 years.
Service interval
Product name/product number
MB sheet
MS-No.
1
nf_BA.book Page 617 Friday, January 25, 2008 3:53 PM
