2008 DODGE SPRINTER brakes

376 OperationTires and wheels
4
Warning
G
The TPMS does not warn you against in-
correctly selected tire inflation pressure
and does not warn you when the tire pres-
sure is not properly selected for the re-
spective vehicle load. It warns you only
when the pressure of one or more tires
decreases significantly below the refer-
ence inflation pressure which was stored
at the time of calibration of the TPMS af-
ter you inflated the tires.Always ensure that you recalibrate the
TPMS after you have inflated the tires to
the recommended cold inflation pressure.
Continued
Warning (Continued)
G
Always adjust the tire inflation pressure
according to the tire and loading informa-
tion placard on the driver’s door B-pillar.Underinflated tires wear excessively and/
or unevenly, adversely affect handling and
fuel economy, and are more likely to fail
from being overheated.Overinflated tires can adversely affect
handling and ride comfort, wear unevenly,
increase stopping distance, and result in
sudden deflation (blowout) because they
are more likely to become punctured or
damaged by road debris, potholes etc.
Continued
Warning (Continued)
G
The TPMS is not able to issue a warning
due to a sudden dramatic loss of pressure
(e.g. tire blowout caused by a foreign ob-
ject). In this case bring the vehicle to a
halt by carefully applying the brakes and
avoiding abrupt steering maneuvers.
nf_BA.book Page 376 Friday, January 25, 2008 3:53 PM

393 Operation
Tires and wheels
4
1Plies in side wall
2Plies under tread
This marking tells you about the type of
cord and number of plies in the side wall
and under the tread.
Accessory weightThe combined weight (in excess of those
standard items which may be replaced)
of automatic transmission, power steer-
ing, power brakes, power windows, pow-
er seats, radio, and heater, to the extent
that these items are available as factory-
installed equipment (whether installed
or not).
Tire ply material
iFor illustrative purposes only. The
actual data on tires is specific to
each vehicle and may vary from the
data shown in the above illustration.
Tire and loading terminology
nf_BA.book Page 393 Friday, January 25, 2008 3:53 PM

397 Operation
Tires and wheels
4
Production options weightThe combined weight of those installed
regular production options weighing
over 5 lbs (2.3 kg) in excess of those
standard items which they replace, not
previously considered in curb weight or
accessory weight, including heavy duty
brakes, ride levelers, roof rack, heavy
duty battery, and special trim.PSI (P
ounds per S
quare I
nch)
A standard unit of measure for air pres-
sure. Another metric unit for air pres-
sure is bar or kilopascal (kPa).
Recommended tire inflation pressureRecommended tire inflation pressure for
normal driving conditions listed on the
tire and loading information placard
1 or
on the tire inflation pressure placard lo-
cated on the driver’s door B-pillar.
Provides best handling, tread life and
riding comfort.
RimA metal support for a tire or a tire and
tube assembly upon which the tire
beads are seated.
Side wallThe portion of a tire between the tread
and the bead.TIN (T
ire I
dentification N
umber)
Unique identifier which facilitates efforts
by tire manufacturers to notify purchas-
ers in recall situations or other safety
matters concerning tires and gives pur-
chases the means to easily identify such
tires. The TIN is comprised of the “man-
ufacturer’s identification mark”, “tire
size”, “tire type code” and “date of man-
ufacture”.
1. For vehicles with a gross weight capacity less
than 10 000 lbs (4 536 kg) (USA only).
nf_BA.book Page 397 Friday, January 25, 2008 3:53 PM

406 OperationWinter driving
4
Drive with particular care on icy roads.
Avoid sudden acceleration, steering
movements and braking.
If it seems likely that the vehicle is about
to enter a skid or cannot be stopped at a
low speed:\4
Move the selector lever to position N.
\4
Try to maintain control of the vehicle
using light corrective steering.
Road salt may adversely affect braking
efficiency. It may therefore be necessary
to apply the brakes more forcefully in or-
der to achieve the same braking force as
normal.
iW h e n t h e y h a v e b e e n r e m o v e d , s t o r e
wheels and tires in a cool, dry, and if
possible dark place. Protect the tires
from oil, grease, and gasoline /
diesel.
Driving in winterWarning
G
Downshifting to brake could cause the
drive wheels to lose grip on a slippery sur-
face due to the increased difference in
speed between the engine and the drive
wheels at this time.
Do not downshift for additional engine
braking on a slippery surface. Use the ser-
vice brake in accordance with road condi-
tions. Only downshift to a lower gear
when traveling at a low engine speed.
nf_BA.book Page 406 Friday, January 25, 2008 3:53 PM

407 Operation
Winter driving
4
Apply the brakes regularly when making
longer journeys on gritted or salted
roads. This will have the effect of restor-
ing the brakes to their normal level of
performance.
When stopping the vehicle after travel-
ing on roads that have been salted,
check that the brakes are fully functional
before proceeding further.
Use "Class U" chains, or other traction
aids that meet SAE Type "U" specifica-
tions.Snow chai ns m us t be the p rope r si ze f or
the vehicle, as recommended by the
chain manufacturer. They should only be
driven on snow-covered roads at speeds
not to exceed 30 mph (50 km / h). Re-
move chains as soon as possible when
driving on roads without snow.Snow chains
!
CAUTION
Use snow chains on rear wheels only.
Some tire sizes do not leave ade-
quate clearance for snow chains. To
help avoid serious damage to your
vehicle or tires, use of snow chains is
not permissible with the spare wheel.
iWhen driving with snow chains, you
may wish to deactivate the ASR
(\2
page 73) before setting the vehi-
cle in motion. This will improve the
vehicle’s traction.
nf_BA.book Page 407 Friday, January 25, 2008 3:53 PM

426 OperationCleaning and care of the vehicle
4
\1
Clean the vehicle, particularly the
lighting equipment, windows, exteri-
or mirrors, steps, entrances, grab
handles, wheels, tires, wheel hous-
ings and license plates. Observe the
notes in this section.
\1
Remove any trapped foreign objects,
e.g. stones.
Warning (Continued)
G
Risk of skiddingDirt and mud on the tires / road surface
reduce wheel grip. This is especially so if
the road surface is wet. The vehicle could
then start to skid.Risk of slippingDirt and mud on the steps and entrances
make the steps less safe. As a result you
could slip from the steps and injure yourself.For this reason, always clean your vehicle
carefully after driving off-road and on con-
struction sites before using public roads.
Continued
Warning (Continued)
G
If you use a high-pressure cleaner or auto-
matic car wash for this purpose, you must
follow the relevant safety instructions in
this section.
Warning
G
Dirty brake discs and brake pads / linings
can impair braking power (to the point of
total failure).You could thereby cause an accident.Check the brake system for operating
safety by testing the brakes before driving
the vehicle onto public roads.If braking power is impaired, stop the ve-
h i c l e a s s o o n a s i t i s s a f e t o d o s o a n d c o n -
sult an authorized Sprinter Dealer which
has the necessary specialist knowledge
and tools to carry out the work required.
Continued
nf_BA.book Page 426 Friday, January 25, 2008 3:53 PM

462 Practical hintsWhat to do if ...
5
#
-
k
6
The yellow ESP
®, ABS-, ASR/BAS
indicator lamps and the red brake
system indicator lamp are lit while
the engine is running.
WAR NING
G
EBV has malfunctioned.
The rear wheels could lock up sooner than ex-
pected when you apply the brakes.
\1Also observe the messages in the dis-
play on vehicles with steering wheel
buttons (\2page 489).
\1Continue driving, but with even greater
care.
\1Have the system checked at an autho-
rized Sprinter Dealer as soon as possi-
ble.
#
-
k
6
The yellow ESP
®, ABS, ASR/BAS
indicator lamps and the red brake
system indicator lamp are lit while
the engine is running.
WAR NING
G
EBV has been deactivated due to undervoltage.
The battery may not be being charged.
The rear wheels could lock up sooner than ex-
pected when you apply the brakes.
\1Also observe the messages in the dis-
play on vehicles with steering wheel
buttons (\2page 489).
\1S t o p y o u r v e h i c l e a s s o o n a s i t i s s a f e t o
do so.
\1Do not drive any further.
\1Consult an authorized Sprinter Dealer.
Problem
Possible cause / result
Suggested solutions
nf_BA.book Page 462 Friday, January 25, 2008 3:53 PM

466 Practical hintsWhat to do if ...
5
-
The yellow ABS indicator
lamp is lit while the engine is
running.
WA RNING
G
ABS has been deactivated due to a malfunction.
ESP
®, ASR and BAS as well as cruise control have
also been deactivated as a result.
The brake system continues to function with the nor-
mal braking effect but with no electronic support.
The wheels could therefore lock up, for example if
the brakes are applied with maximum force.
\1Also observe the messages in the dis-
play on vehicles with steering wheel
buttons (\2page 489).
\1Continue driving, but with even greater
care.
\1Have the system checked at an autho-
rized Sprinter Dealer as soon as possi-
ble.
WA RNING
G
ABS is temporarily unavailable.
Self diagnosis may not have been completed yet.
The brake system is still available with the normal
braking effect.
\1Drive on for a distance of more than
13 mph (20 km / h).
ABS is available again if the message
goes out.
Problem
Possible cause / result
Suggested solutions
nf_BA.book Page 466 Friday, January 25, 2008 3:53 PM