2008 DODGE SPRINTER lights

131 Controls in detail
Lighting
3
Switching on the low-beam head-
lamps
\1
Turn light switch to
B
.
The
B
indicator lamp in the in-
strument cluster lights up.
Switching on the high-beam head-
lampsThe combination switch is located on
the left of the steering wheel.
1High-beam headlamps
2Headlamp flasher\1
Turn key to position
1 in ignition lock
(
\2
page 111).
\1
Turn light switch to
B
.
U
Automatic headlamp control*
M
Lights off
C
Parking lamps, license plate
and instrument lighting on
B
Low-beam headlamps on
N82.10-2527-31
nf_BA.book Page 131 Friday, January 25, 2008 3:53 PM

132 Controls in detailLighting
3
\1
Press combination switch forward 1
.
The indicator lamp
A
in the in-
strument cluster lights up.
Headlamp flasher
\1
Turn key to position
1 in ignition lock
(
\2
page 111).
\1
Pull combination switch briefly in
direction
2
.
Constant headlamp mode*On vehicles with steering wheel buttons,
you can set constant headlamp mode
(\2
page 171). This does not apply to
countries in which there is a legal re-
quirement to use constant headlamp
mode.
\1
Turn light switch to
M
.
The low-beam headlamps, parking
lamps and license plate lamp are
switched on when the engine is
running.
The
B
indicator lamp in the in-
strument cluster lights up.
Automatic headlamp control*The parking lamps, low-beam head-
lamps and license plate lamp are
switched on automatically when the
brightness of ambient light falls below a
predetermined level.
nf_BA.book Page 132 Friday, January 25, 2008 3:53 PM

133 Controls in detail
Lighting
3
\1
Turn light switch to
U
.The parking lamps are switched on /
off automatically when the key is in
position
1 (\2
page 111) in the igni-
tion lock.
The parking lamps, low-beam head-
lamps and license plate lamp are
switched on / off automatically when
the engine is running, depending on
the ambient light conditions.
Only use manual headlamp mode when
you are driving in countries where driv-
ing with the low-beam headlamps
switched on is required by law.
\1
In this case, turn the light switch to B
.
Warning
G
If the light switch is atU:
\4the headlamps could switch off tem-
porarily due to extreme glare, e.g.
from oncoming traffic
\4the lights do not switch on automati-
cally in foggy conditions
Set the light switch to B. Otherwise
you are endangering yourself and others.
Continued
Warning (Continued)
G
If it is dark, only turn the light switch from
U toB when the vehicle is station-
ary. You could otherwise cause an acci-
dent if the headlamps were to switch off
briefly.
Automatic headlamp mode is only a driv-
ing aid. You are responsible for the vehi-
cle’s lighting at all times.
nf_BA.book Page 133 Friday, January 25, 2008 3:53 PM

143 Controls in detail
Instrument cluster
3
The display in the instrument cluster is
activated when you:\4
open the driver’s door
\4
switch on the ignition
\4
press the reset button
\4
switch on the lights
The display switches off automatically
after approximately 30 seconds if:
\4
there is no vehicle lighting switched
on
\4
the key is in position
0 in the ignition
lock
(\2
page 111)
Warning
G
No messages can be displayed if the in-
strument cluster and / or the display is
malfunctioning.You will not then be able to see informa-
tion about the vehicle status, such as
speed and outside temperature, warning
and indicator lamps, malfunction and
warning messages or the malfunction of
systems. Handling characteristics may be
affected.
Continued
Warning (Continued)
G
Contact a qualified specialist workshop
immediately which has the necessary spe-
cialist knowledge and tools to carry out
the work required.The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose. In particular, work relevant to
safety or on safety-related systems must
be carried out at a qualified specialist
workshop.
Continued
nf_BA.book Page 143 Friday, January 25, 2008 3:53 PM

144 Controls in detailInstrument cluster
3
With the lights switched on, you can ad-
just the brightness of the instrument
lighting using the and buttons.\1
Brighter: press the button.
\1
Dimmer: press the button.
Warning (Continued)
G
Only use adjustment buttons , , ,
or when traffic conditions permit.
You will otherwise be unable to observe
road and traffic conditions and could
cause an accident.Do not reach through the steering wheel
to press the adjustment buttons. This will
make the steering wheel much more diffi-
cult to control. Your attention will also be
diverted from the road and traffic condi-
tions. This could cause you to lose control
of the vehicle and could lead to an acci-
dent.
Continued
Warning (Continued)
G
Do not rest your head or chest on the
steering wheel or dashboard when operat-
ing the adjustment buttons. See the safe-
ty precautions for airbags (\2page 46).
Instrument lightingiVehicles with automatic headlamp
mode*:
The instrument lighting also adjusts
in line with the automatic headlamp
mode.
nf_BA.book Page 144 Friday, January 25, 2008 3:53 PM

173 Controls in detail
Operating system with steering wheel buttons*
3
\1
Press the
æ
or
ç
button to
switch the locator lighting On or
Off
.
Setting the exterior lighting delayed
switch-off*The
Headlamps
(headlamps delayed
switch-off) function enables you to set
whether or not the exterior lighting
should remain on in the dark after the
doors have been closed.
When you have set the delayed switch-
off and have switched off the engine, the
following light up:
\4
The parking lamps
\4
The tail lamps
\4
The license plate lamp
\4
The front foglamps
\1
Press the
æ
or
ç
to select the
Lighting
submenu.
\1
Press the
j
or
k
button re-
peatedly until you see the Headlamps

message in the display.
The current setting is highlighted. N54.32-2269-31
iYou can reactivate this function by
opening a door within 10 minutes.
The lights are switched off after 60
seconds if you do not open a door or
if you close an opened door after the
engine has been switched off.
nf_BA.book Page 173 Friday, January 25, 2008 3:53 PM

174 Controls in detailOperating system with steering wheel buttons*
3
\1
Press the
æ
or
ç
button to se-
lect whether and for how long the
lights should remain on.
Vehicle submenuYou can reach the
Vehicle
submenu via
the
Settings
menu (
\2
page 161).
Setting station selectionThe
Search
function enables you to de-
termine whether the radio (
\2
page 158)
should search for a new station or a pre-
viously stored station each time the ra-
dio is switched on.
\1
Press the
è
or
ÿ
button re-
peatedly until you see the
Vehicle

message in the display.
\1
Press the
j
or
k
button re-
peatedly until you see the
Search

message in the display.
The current setting is highlighted.
\1
Press the
æ
or
ç
button to se-
lect how the radio should tune into a
station.
\4
Frequency
: The nearest station
on the waveband is selected
\4
Memory
: The nearest saved sta-
tion is selected
Function
Page
Set station selection
174
Set the windshield wiper sen-
sitivity
175
N54.32-2270-31
N54.32-2271-31
nf_BA.book Page 174 Friday, January 25, 2008 3:53 PM

192 Controls in detailDriving and parking
3
Applying the handbrake
\1
Pull lever
1
up as far as the last de-
tent.
The
7
indicator lamp in the in-
strument cluster lights up while the
engine is running.
Releasing the handbrake
\1
Raise lever
1
slightly and press re-
lease knob
2
.
\1
Guide lever
1
down to the stop.
The
7
indicator lamp in the in-
strument cluster goes out.
Emergency brakingNormally, you are only permitted to ap-
ply the handbrake when the vehicle is
stationary.
In exceptional cases, the handbrake can
be used for emergency braking if the
service brake fails.\1
Keep release knob
2
pressed and
carefully apply lever1
.
iOn vehicles with a folding handbrake
lever, you can then press lever
1

down to the stop.
iOn vehicles with a folding handbrake
lever, you must first pull lever
1
up
to the stop.
nf_BA.book Page 192 Friday, January 25, 2008 3:53 PM