2008 DODGE CHALLENGER light

[x] Cancel search: light

Page 79 of 385

DODGE CHALLENGER 2008  Owners Manual Heated Remote Control Mirrors — If Equipped
These mirrors are heated to melt frost or ice. This feature
is activated whenever you turn on the Electric Rear
Window Defroster.
Illuminated Vanity Mirro

Page 92 of 385

DODGE CHALLENGER 2008  Owners Manual •After theReady prompt and the following beep, say
the name of the language you wish to switch to
English, Espanol, or Francais.
•Continue to follow the system prompts to complete
language selec

Page 118 of 385

DODGE CHALLENGER 2008  Owners Manual LIGHTS
Headlight Switch
The headlight switch is located on the left side of the
instrument panel. This switch controls the operation of
the headlights, parking lights, instrument panel lights,
instrum

Page 119 of 385

DODGE CHALLENGER 2008  Owners Manual Automatic Headlights — If Equipped
This system automatically turns the headlights on or off
according to ambient light levels. To turn the system on,
rotate the headlight switch counterclockwise to

Page 120 of 385

DODGE CHALLENGER 2008  Owners Manual If you turn the headlights, park lights, or ignition switch
ON again, the system will cancel the delay.
If you turn the headlights off before the ignition, they will
turn off in the normal manner.
NOT

Page 121 of 385

DODGE CHALLENGER 2008  Owners Manual Multifunction Control Lever
The multifunction control lever controls the operation of
the turn signals, headlight beam selection, and passing
lights. The lever is located on the left side of the steer

Page 122 of 385

DODGE CHALLENGER 2008  Owners Manual Highbeam/Lowbeam Select Switch
Push the multifunction control lever away from you to
switch the headlights to HIGH beam. Pull the lever
toward you to switch the headlights back to LOW beam.
Flash to P

Page 123 of 385

DODGE CHALLENGER 2008  Owners Manual Interior Lights
The interior lights come on when a door is opened.
To protect the battery, the interior lights will turn off
automatically 10 minutes after the ignition switch is moved
to the LOCK pos