2008 Citroen C5 steering

159
V
F U S E S
U N D E R T H E B O N N E T
To access the fusebox under the bonnet, undo each screw by a 1/4 turn.
After a repair, take care to reclose the cover.
Any repairs on the MAXI fuses (that give additional protection), located in the fuseboxes, must be left to a CITROËN dealer.fuseboxes, must be left to a fuseboxes, must be left to a
Ref.RatingFunction
F120AEngine control unit
F215AHorn
F310AScreen wash pump
F410AHeadlamp wash pump
F515AStarter
F610AAir fl ow meter - Directional headlamps - Diagnos-
F710AAutomatic gearbox lever lock - Power steering
F825AStarter
F910AClutch switch - STOP switch
F1030AStarter
F1140AAir conditioning blower
F1230AWipers
F1340ABSI supply (ignition on)
F1430A-
F1510ARight-hand main beam
F1610ALeft-hand main beam
F1715ARight-hand dipped beam
F1815ALeft-hand dipped beam
F1915AStarter
F2010AStarter
F215AStarter

177
VI
T O W I N G – L I F T I N G
TOWING WITH WHEELS ON THE GROUND
Towing eye fi xings are located at the front and at the rear of the vehi-cle.
Detach the cover:
For the front cover, lever with a screwdriver at the top of the cover.
For the rear cover, press:
On the right hand side (saloon),
On the bottom (Tourer).
The ignition key must be in posi-tion M to retain steering.
Use a bar with attachments to the towing eyes as above.
The towing eye is removable, to be stowed in the jack protection box inside the spare wheel.

111111
I
e
abc
fgh
d
i
N A V I G A T I O N / G U I D A N C E
G E N E R A L
The Multifunction screenDuring a guidance, you have access to the following types of information:
a Manœuvre to be made, or direction to be taken.b Distance to the next manoeuvre.c Next manoeuvre to be made.d N ex t r o a d t o b e t a ke n a n d n a m e o f town.e Symbol concerning Traffi c information or the services that are in proximity.f Road you are currently on, name of the town.g Estimated time of arrival at destination (based on fl owing traffi c).h Distance to fi nal destination.i Altitude.
Apart from on the screen, the manœuvres t o b e m a d e a r e a n n o u n c e d by a vo i c e synthesiser.
Repeating the last piece of voice infor-mationA few seconds after enunciation of a guid-ance voice instruction, you have the pos-sibility of hearing it again.Keep the end of the lighting control stalk pressed.
How to adjust the volume for the voice instructions ?While a voice instruction is being spoken, press on the volume adjustment but ton c ontrols either on the system or on the steering wheel.Adjustment is also possible in the “Confi gu-ration” menu.
DESCRIPTION OF THE TYPES OF INFORMA -TION DISPLAYED DURING NAVIGATIONTHE VOICE SYNTHESIS
Rotating this control allows you to:M ove around the screen to choose a function, a parameter or a value.Reduce or increase a value when adjust-ing.Scroll through items to be selected in a list.It also allows you via a short press to:A c c e s s t h e c o n t ex t u a l m e n u (s h o r t -cuts).Validate the chosen function or the modi-fi ed value.Select a parameter of the type “adjust-ment” or “list” for modifi cation.Activate/Deactivate a function.

272727
IVD
B
C
D
Selection of a pre- defi ned musical ambiance automatically adjusts bass and treble. Select the musical ambiance “None” to personalise your adjustment of bass and treble.Adjustments of loudness, bass and treble (when they are available) are specifi c to each source.The sound volume is automatically corrected as a function of vehicle speed, provided the facility has been activated.
Press on button SOURCE.
Rotate the control or use the buttons at the steering B and C to increase or decrease the volume.
How to stop the sound momentarily ?Press on the Mute button D.The sound of the Audio source currently b e i n g l i s t e n e d t o i s c u t . T h e g u i d a n c e instructions remain activated. To restore sound, press on one of the buttons on your NaviDrive, or on one of the controls on the steering wheel.
or
Press on button D to select:the pre-defi ned musical ambiances,bass,treble,loudness,front /rear and left /right balanceautomatic correction of the volume as a function of vehicle speed.Rotate the control to modify the value of the parameter displayed.The value is automatically taken into account without the need for validation.

343434
IV
K
Press on the TA/PTY button to activate auto-PTYmatic broadcasting of traffi c announcemnts.
During broadcasting of traf fi c announce -ments, the sound volume can be adjusted independent ly of t he gener al r adio vol -ume.Rotate the control or press on the controls at the steering wheel J and K to increase or decrease the volume.
The “TA” function lets you switch automati-TATAcally on a temporary basis to an FM station broadcasting road information.The radio station, or the audio source being listened to at that moment, is paused. Once the traffi c information is fi nished, the system switches back to the radio station or audio source initially being listened to.Press on the TA/PTY button to stop listening PTYto a message being broadcast.
CONDITIONS FOR RECEIVING TRAFFIC ANNOUNCEMENTS
You have to be in FM.The station you are tuned to must confi rm through the RDS system that it broadcasts road information.Stations organised in a network (EON) have regional transmitters sending their own programmes. While listening to one of these stations you can switch to any station on the network that is broadcasting traffi c information messages.

373737
IVABCBCDD
press button B to return to the start of the current track. A second press takes you back to the previous track.Press on button C or on the control at the steering wheel D to play the next track.

424242
IV
ABC
C D C H A N G E R S O U R C E
( A C C O R D I N G T O E Q U I P M E N T )
Hold down one of the buttons 1 to 6 on the alphanumeric keypad to choose the CD that you wish to play back.
1. Press on button B or rotate the control on the steering wheel C upwards to listen to the next CD.2. Press on button A or rotate the control on Athe steering wheel C downwards to listen to the previous CD.Note: Playback of the star t of the CD is automatic.After each change of source, on return to CD changer source, playback will resume at the same point where it had been interrupted.
WHAT IS THE CD CHANGER ?SELECTING A CD
P LAY BACK THE NEXT /PREVIOUS CD
or
CD CHANGER SOURCE
This device can accommodate 6 discs.
I NSERTING CDS INTO THE MAGAZINE
Insert the CDs printed sur face to the left.
Note:Each compartment takes one disc only.The CD changer will not operate if discs are inserted the wrong way up.
S ELECTING CD CHANGER SOURCE
Press successively on button 24, until the desired source is obtained.

4343
V
T E L E P H O N E
G E N E R A L
The telephone function consists of a GSM telephone incorporated in NaviDrive.It has a “Hands-free” function, provided by a microphone located in the front interior lamp and controls at the steering wheel for accessing the majority of operations.
As wit h any mobil e t el ephone, t his t el ep hon e op er at e s t hanks to b ot h cellular and terrestrial networks. For this reason, it cannot guarantee a con-nection in all cases.
Do not allow yourself to be distracted while you are driving.I t i s e s s e n t i a l t o c o m p l y w i t h t h e national legislation in force.Stop the vehicle if you wish to pursue a telephone conversation or proceed w i t h c e r t a i n a c t i o n s (c o m p o si n g a number for example).
Apart from during a communication, it indi-cates to you:the presence of voice messages or text messages (S M S) that have not been read,the communication time since the last update,the level of reception of the networks.
During a communication, it indicates to you:the time elapsed since the star t of the communication,the number (provided the option and the service are available),the name of your correspondant (if this is recorded in the directory),the level of reception of the network.