2008 Citroen C5 stop start
[x] Cancel search: stop startPage 24 of 240
27
II
S T E E R I N G L O C K - I G N I T I O N - S T A R T E R
NEVER REMOVE THE IGNITION KEY BEFORE THE ENGINE HAS COME TO A COMPLETE STOP.
IT IS ESSENTIAL ALWAYS TO DRIVE WITH THE ENGINE RUNNING, SO AS TO RETAIN STEERING AND BRAKING A S S I S T A N C E ( r i s k o f t h e s t e e r i n g l o c k e n g a g i n g a n d l o s s o f s a f e t y f e a t u r e s ) .
When stationary, having removed the key, carefully turn the steering wheel if you wish to lock the steering.
S: Steering lock
T o u n l o c k t h e s t e e r i n g , g e n t l y m o v e t h e s t e e r i n g w h e e l w h i l e t u r n i n g t h e k e y , w i t h o u t e x e r t i n g u n d u e f o r c e .
W h e n y o u r e m o v e t h e k e y , t u r n y o u r s t e e r i n g w h e e l t o l o c k t h e s t e e r i n g . T h e k e y c a n o n l y b e r e m o v e d w h e n i n p o s i t i o n S.
Economy mode
W h e n t h e e n g i n e i s s t o p p e d , s o m e f u n c t i o n s ( a u d i o s y s t e m , s c r e e n w i p e , e l e c t r i c w i n d o w s , s u n r o o f , e l e c t r i c s e a t s , t e l e p h o n e , v i d e o , i n t e r i o r l i g h t i n g e t c . ) a r e o n l y e l e c t r i c a l l y s u p p l i e d f o r a m a x i m u m p e r i o d o f 3 0 m i n u t e s , t o a v o i d d i s c h a r g i n g t h e b a t t e r y .
O n c e t h i s p e r i o d i s o v e r , a m e s s a g e i s d i s p l a y e d o n t h e i n s t r u m e n t p a n e l s c r e e n a n d t h e a c t i v e f u n c t i o n s a r e p l a c e d o n s t a n d b y .
T h e e l e c t r i c a l c o m p o n e n t s r e l a t i n g t o c o m f o r t a n d a l s o t h e h e a d l a m p s ( n o t s i d e l a m p s o r h a z a r d w a r n i n g l a m p s ) c u t o u t a u t o m a t i c a l l y . T o r e a c t i v a t e t h e m , i t i s n e c e s s a r y t o s t a r t t h e e n g i n e .
M: Drive position
T h e s t e e r i n g i s u n l o c k e d ( b y t u r n - i n g t h e k e y i n p o s i t i o n M , i f n e c e s - s a r y m o v e t h e s t e e r i n g w h e e l ) .
D: Starting
R e l e a s e t h e k e y a s s o o n a s t h e e n g i n e s t a r t s . N e v e r t u r n i t w h i l e t h e e n g i n e i s r u n n i n g .
Page 89 of 240
92
III
A
Locking/unlocking from the inside
With the doors and the boot closed, pressing button A allows you to control the electric central locking and unlocking.
It is still possible to open the doors from the inside.
If one of the doors is open or not properly closed, central locking will not work.
A C C E S S
Anti-theft protection
On starting the vehicle, the system automatically locks the doors as soon as you reach approximately 10 km/h.
Note: If a door is opened, this will automatically lock itself again when the vehicle reaches approximately 10 km/h (6 mph).
Activation/Deactivation of the anti-intrusion protection
After switching on the ignition, make a long press on the central unlocking control until a message is displayed and a beep is heard.
Selection of doors / boot
After having selected “Plip action / Driver” in the “Vehicle parameters / Comfort” menu of the instrument panel screen.
Pressing the remote control unlocks the passenger door.
A 2nd successive press unlocks all of the doors and the boot.
If you decide to drive with the doors locked, remember that i n t h e e v e n t o f a n a c c i d e n t t h i s r e n d e r s a c c e s s m o r e d i f fi -cult for the emergency services.
The warning lamp associated with the control A signals 3 statuses: l t fl a s h e s w h e n t h e i g n i t i o n k e y is in the stop position or when the key is not detected and the doors are locked.
It lights up when the vehi-cle is locked with the ignition switched on.It goes out when the doors are not locked.
Note: Control A is inactive if the vehicle has been locked using the remote control or the key.
Page 96 of 240
99
III
A U T O M A T I C A I R C O N D I T I O N I N G
M O N O Z O N E
This button activates the recirculation of air in the passenger compart-ment.
Press button 8 to switch off the entry of air from outside. The warning lamp comes on.
Whilst retaining the other settings, this position allows the driver at any moment to exclude unpleasant smells or smoke/emissions coming from outside.
This mode should be cancelled as soon as possible to allow the redistribution of air in the pas-senger compartment.
8. Air recirculation – Entry of air from outsideRemarks:When starting from cold, in order to prevent unwanted cold a i r , t h e a i r fl o w w i l l i n c r e a s e o n l y gradually to its optimum level.
If you enter the vehicle after a fairly prolonged stop and the temperature inside the vehicle is far from comfortable, it serves no purpose to modify the tem-perature that is displayed as an attempt to go immediately to the desired comfort level. The system automatically uses all of its power to compensate the temperature gap as quickly as possible.Water arising from the conden-sation in the air conditioning drains out through a hole pro-vided for this purpose ; a pool of water may thus form under-neath the vehicle when station-ary.
Whatever the time of year, even in cool weather the air condition-ing is useful in removing humid-ity and misting. Avoid driving for too long with air conditioning deactivated.
Page 99 of 240
102
III
A U T O M A T I C A I R C O N D I T I O N I N G
D U A L - Z O N E
Switching off the entry of air
Press button 6 to switch off the entry of air from outside.
Whilst retaining the other settings, this position allows the driver at any moment to exclude unpleas-ant smells or smoke/emissions coming from outside.
This mode should be cancelled as soon as possible to allow the redistribution of air in the pas-senger compartment.
Entry of air from outside
Press once on button 6 to return to the original status (Entry of air from outside).
7. Rear demisting - deicing
Press button 7, with the engine running, to start a rapid deicing or demisting of the rear screen and rear view mirrors. The warning lamp comes on.
This mode automatically stops depending on the outside tempera-ture. It can be interrupted by a fur-ther press on button 7 or by stop-ping the engine.
In some cases, “AUTO” mode may not be suf- fi c i e n t t o d e m i s t o r defrost the windows (e.g. humidity, several passengers, frost).
Press button 8 for rapid clear win-dows. The warning lamp comes on. This system controls air con-ditioning, temperature and air fl o w / e n t r y . I t d i s t r i b u t e s v e n t i l a t i o n towards the windscreen and the front windows.
You can manually exit “Demisting” mode. This mode should be can-celled as soon as possible to allow the redistribution of air in the pas-senger compartment.
A press on either of the buttons 1aor 1b allows you to return to “AUTO” mode.
8. Front demisting - deicing
Remarks:
When starting from cold, in order to prevent unwanted cold a i r , t h e a i r fl o w w i l l i n c r e a s e o n l y gradually to its optimum level.
If you enter the vehicle after a fairly prolonged stop and the temperature inside the vehicle is far from comfortable, it serves no purpose to modify the tem-perature that is displayed as an attempt to go immediately to the desired comfort level. The sys-tem automatically uses all of its power to compensate the tem-perature gap as quickly as pos-sible.
Water arising from the conden-sation in the air conditioning drains out through a hole pro-vided for this purpose ; a pool of water may thus form under-neath the vehicle when station-ary.
Whatever the time of year, even in cool weather the air condition-ing is useful in removing humid-ity and misting. Avoid driving for too long with air conditioning deactivated.
Page 100 of 240
103
III2
5
1
3
4
6
7
8
9
With the engine off, programmable heating preheats the coolant cir-cuit in order to optimise the engine operating temperature prior to starting.
The programmable heating sys-tem can be started immediately or delayed thanks to its programming function.
Digital programmer
The heating system’s programmer is located on the right-hand side of the dashboard.
1. Time or remaining functioning time.
2. Increase (time).
3. Select programme.
4. Programme number selected.
5. Immediate start-up of heating.
6. Time adjustment and reading warning lamp.
7. Reduce (time).
8. Heating mode warning lamp.
9 Programmable heating system warning lamp.
LED lit : Activated.
LED off : Deactivated.
P R O G R A M M A B L E H E A T I N G
( D E P E N D I N G O N C O U N T R Y )
Immediate start-up
Press button 5.
The screen displays a default duration of 60 minutes, you are advised to adjust this to a duration of 30 minutes maximum (see section “ adjusting the operating duration ”). The warning lamp 8 lights up and remains lit for the whole duration of the system’s operation. The duration of the system’s operation disappears after 10 seconds.
Stopping the heating
Press button 5.
The warning lamp 8 and the screen go out.
With the engine idle or the vehicle stationary, it is nor-mal to hear a high-pitched whistling noise and to notice some smoke / emis-sions.
Page 140 of 240
143
IV
F R E Q U E N T L Y - A S K E D Q U E S T I O N S
QUESTIONANSWERSOLUTION
T r a f fi c A n n o u n c e m e n t s (TA) is displayed. I do not r e c e i v e a n y t r a f fi c i n f o r m a - t i o n o r p u b l i c a n n o u n c e -ments.
The particular radio station is not in the r e g i o n a l t r a f fi c i n f o r m a t i o n n e t w o r k .Change to a radio station that does b r o a d c a s t t r a f fi c i n f o r m a t i o n .
The reception quality of t h e r a d i o s t a t i o n b e i n g l i s - t e n e d t o g r a d u a l l y d e t e r i o -rates.
T h e v e h i c l e i s t o o d i s t a n t f r o m t h e t r a n s m i t - t e r , o r n o t r a n s m i t t e r i s p r e s e n t i n t h e g e o -graphical area you are passing through.
Activate the RDS function to allow the s y s t e m t o c h e c k w h e t h e r a m o r e p o w -erful transmitter is to be found in the geographical area.
T h e e n v i r o n m e n t ( h i l l s , h i g h b u i l d i n g s , t u n -nels, underground car parks, etc.) is blocking reception, even in RDS mode.
This phenomenon is normal and does not imply anything wrong with the radio.
The aerial is absent or has been damaged (for example after going through a car wash or in an underground car park).
H a v e t h e a e r i a l c h e c k e d b y a C I T R O Ë N dealer.
Cutting out of sound for 1 t o 2 s e c o n d s i n r a d i o mode.
T h e R D S s y s t e m d u r i n g t h i s b r i e f s o u n d c u t -off is searching for a better frequency that might offer improved reception of the station.
D e a c t i v a t e t h e R D S f u n c t i o n i f t h e p h e -nomenon occurs too frequently and always on the same journey.
When the engine is not running, the radio stops after a few minutes.
W h e n t h e e n g i n e i s s w i t c h e d o f f , t h e w o r k -ing time for the radio depends on the battery charge. The interruption is normal: the radio goes into economy mode, cutting off in order to save the vehicle’s battery.
You have to start the engine so as to increase the battery charge.
The message “the audio system is overheating” appears on the screen.
In order to protect the audio equipment in excessive ambient temperatures, the radio goes into an automatic thermic protection mode which results in a reduction in sound volume or stopping of the CD player.
Switch off the audio system for a few minutes in order to allow the system to cool down.
Page 152 of 240
155
V
+ 1
- 4- 3
+ 2
A
B
C
1 2 V B A T T E R Y
V 6 H Di E N G I N E
Starting the engine with an assisting battery
If the battery is discharged, it is possible to use either a separate emergency battery or a battery on another vehicle.
If you use the battery on another vehicle, stop the engine on the latter. The two vehicles must not come into direct contact with each other.
Check that the assisting battery h a s s u f fi c i e n t v o l t a g e ( 1 2 V ) .
Lift up the pegs to remove the front left-hand headlamp cover.
Connect the cables according to the order indicated in the dia-ordergram.
A Pole “+” of the broken down vehicle (Under the red cover).B Assisting battery.C Pole “–” of the broken down vehicle (Under the bonnet).
Check that the leads are well secured (risk of sparks).
Start the engine of the assist-ing vehicle. Let the engine run for around 1 minute at a slightly accel-erated idle.
Operate the starter on the vehicle being assisted.
It is essential to follow the indi-cated sequence correctly.
N e v e r a p p r o a c h w i t h a fl a m e o r c r e a t e s p a r k s i n t h e v i
c i n i t y o f t h e b a t t e r y ( e x p l o s i v e g a s ) .
The battery contains dilute sulphuric acid which is hig hly corrosive.
When handling batteries, always protect your face and es pecially your eyes.
In the event of any contact with the skin, rinse immediatel y with copious amounts of fresh water.
For any battery replacement, contact a CITROËN dealer.
Do not touch the leads during the operation.
Do not lean over the batteries.
Disconnect the cables in reverse order, making sure they do not touch together.
Advice
Battery location and access
The battery is located in the boot under the left hand wing trim. To a c c e s s t h e b a t t e r y , o p e n t h e fl a p .
IMPORTANT
In the event of a battery failure, and if the boot is closed, it is then necessary to feed an electrical supply to your vehicle.
Page 156 of 240
159
V
F U S E S
U N D E R T H E B O N N E T
To access the fusebox under the bonnet, undo each screw by a 1/4 turn.
After a repair, take care to reclose the cover.
Any repairs on the MAXI fuses (that give additional protection), located in the fuseboxes, must be left to a CITROËN dealer.fuseboxes, must be left to a fuseboxes, must be left to a
Ref.RatingFunction
F120AEngine control unit
F215AHorn
F310AScreen wash pump
F410AHeadlamp wash pump
F515AStarter
F610A A i r fl o w m e t e r - D i r e c t i o n a l h e a d l a m p s - D i a g n o s -
F710AAutomatic gearbox lever lock - Power steering
F825AStarter
F910AClutch switch - STOP switch
F1030AStarter
F1140AAir conditioning blower
F1230AWipers
F1340ABSI supply (ignition on)
F1430A-
F1510ARight-hand main beam
F1610ALeft-hand main beam
F1715ARight-hand dipped beam
F1815ALeft-hand dipped beam
F1915AStarter
F2010AStarter
F215AStarter