2008 Citroen C5 DAG height adjustment

I
8
9
10
1718
11
1
2
1213
14
153
5
8
6
4
7
16
19
20
21
IN BRIEF
1 Electric windows / rear view mirrors / Child safety controls
2 Memorisation of driver’s seat, rear view mirrors and air conditioning settings
3 Bonnet release
4 Controls at the steering wheel:Speed limiterCruise control
5 Horn
6 Audio/telematic controls under steering wheel
7 Driver's airbag
8 Navigation controls
9 Driver's air vent
10 Instrument panel
11 Driver's air vent
12 Lighting control
13 Windscreen wiper / Screen wash controls
14 Ignition switch
15 ESP / Parking assistance controls/
16 Steering column adjustment
17 Knees airbag
18 Oddments trayFusebox access fl ap
19 Checks / Anti-intrusion alarm / Parking space sensor controls
20 Lighting / Direction indicators / Foglamp / Voice recognition controls
21 Manual headlamp height adjustment
--
D A S H B O A R D

II
1111
A
FG
HI
C
B
D
J
J
E
K
IN BRIEF
F. Seat height and slide adjust-ments.
G. Adjustment of the backrest angle.
H. Adjustment of top of backrest.
I. Adjustment of 2 axis lumbar support.
J. Massage function.
K. Heated seat control.
A. Adjustment of the backrest angle.
B. Adjustment of the seat height and angle.
C. Heated seat control.
D. Longitudinal adjustment of seat.
E. Adjustment of the backrest lum-bar support.
5354
G E T T I N G S T A R T E D
56
Memorisation
The Memorisation function allows you to programme the driver’s seat, rear view mirrors and air conditioning settings.
The correct positioning of the belt strap is through the middle of the shoulder. See “Seat belts”.
To adjust the seat belt for height, compress the control and slide it in the desired direction.
Seat belt height adjustmentFront seats
Electrical adjustmentsManual adjustments

45
II
A
3
2
4
1
LIGHTING CONTROL STALK
1 : Off.
2 : Automatic lighting.
3 : Sidelamps.
4 : Dipped beams / Main beams.
All vehicle lamps off
Rotate the ring A forwards.
They go out once the brightness has reached a satisfactory level or about 5 minutes after the wind-screen wipers have stopped.
To activate this function, turn the ring A to position 2.
Take care not to cover the bright-ness sensor, which is visible from outside the windscreen, behind the interior rear view mir-ror.
Automatic lighting of headlamps
The sidelamps and the dipped beams come on automatically when the light is insuffi cient or if the windscreen wipers are in con-tinuous operation.
Rotate the ring A forwards.
Sidelamps on
Dipped beams/main beams on
Pull the control stalk towards youto change between dipped beam and main beam.
Rotate the ring A forwards.
S I G N A L L I N G
Manual headlamp height adjustment
You are advised to adjust the aim of the headlamps in accordance with vehicle load.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
-. Intermediate setting.
2. 5 people + maximum permitted load.
-. Intermediate setting.
3. Driver + maximum permitted load.
Visible alert / headlamp fl ash
Pull the control towards you.
The headlamp fl ash can be made even with the ignition switched off.

52
II
A
S T E E R I N G C O L U M N A D J U S T M E N T –
S E A T B E L T H E I G H T A D J U S T M E N T
Adjustment of height and reach of steering wheel
With the vehicle at rest, unlock the steering wheel by pushing con-trol A forwards.
Adjust the height and the reach of the steering wheel, then lock the position by pulling the lever upwards.
As a matter of safety, the adjustments in your driving position must be made only while the vehicle is stationary.
First adjust your seat to the most suitable position, then a djust the position of the steering wheel. See “Driving position”.
Seat belt height adjustment
The correct positioning of the belt strap is through the middle of the shoulder. See “Seat belts”.
To adjust the seat belt for height, compress the control and slide it in the desired direction.

53
II
A
5
43
2
1
6
F R O N T S E A T S
M A N U A L A D J U S T M E N T S
1. Adjustments to the height and angle of the head restraint
To raise it, pull upwards.
To lower it, press on the control A to unlock it, and simultaneously on the head restraint itself. The adjustment is correct when the top edge of the head restraint is at the same height as the top of the head. It is also tilt-adjustable.
To raise it, press control A to unlock it, then pull it upwards.
2. Adjustment of the backrest angle
Use the control to adjust the backrest angle.
It is possible to recline the backrest angle to 45° by pushing it until it locks.
3. Adjustment of the seat height and angle
Raise or lower the control the number of times required to obtain the desired posi-tion.
4. Longitudinal adjustment of seat
Lift the control bar and adjust to the desired position.
5. Adjustment of lumbar support
Turn the control and adjust to the desired position.
6. Heated seat controls
Note: The heated seats only operate when the engine is running.
0: Off.
1: Gentle.
2: Medium.
3: Strong.
For your safety, do not d r i v e w i t h t h e h e a d restraints removed ; t h e s e m u s t b e i n p l a c e a n d c o r r e c t l y adjusted.

55
II
C
B
D
A
F R O N T S E A T S
E L E C T R I C A L A D J U S T M E N T S
The Welcome function
When the driver's door is opened and the ignition is off, the seat moves to ease accessing or leav-ing the vehicle.
Take care not to hinder the for-wards or backwards movement of the seat.
You may activate or deactivate this function using the “Main Menu” on the instrument panel screen. To do so, select “Vehicle parameters / Comfort / Driver welcome”.
Head restraint height and angle adjustments on electric seats
To adjust the angle of the head restraint, push back or pull forward section C of the head restraint until you reach the desired position.
To raise it, pull upwards.
To lower it, press on the control Dto unlock it, and simultaneously on the head restraint itself.
To raise it, press control D to unlock it, then pull it upwards.
0: Off.
1: Gentle.
2: Medium.
3: Strong.
Controls for the heated seats
The front seats can be heated indi-vidually. With the engine running, use control A, located beside the seats to choose between three heating levels:
Massage function
This function provides the driver with a back massage.
To activate the massage, with the engine runnuing, press on but-ton B. The warning lamp comes on and the massage function is acti-vated for a period of 1 hour. During this time, massage is performed in cycles of 6 minutes (4 minutes of massage followed by 2 minutes break). In total, the system will per-form 10 cycles.
After 1 hour, the function is deacti-vated. The warning lamp goes out.
You can deactivate the massage function at any time by pressing on button B.

175
VI
3
Before positioning the jack :Always adjust the vehicle’s ground clearance to the “maximum height” position and retain this adjustment for as long as the jack is under the vehi-cle (do not use the hydraulic adjustments).Immobilise your vehicle on horizontal, stable and non-slippery ground.
Ensure that any passengers have left the vehicle and are in a safe place.
Never get underneath the vehi-cle if it is supported only by the jack.
The jack and all of the tools are specific to your vehicle. Do not use them for any other applications.
Have the original wheel repaired and refi tted as soon as possi-ble.
-
-
-
REMOVAL
1. Park the vehicle on stable, fi rm ground that is not slippery. Apply the parking brake.
C H A N G I N G A W H E E L
2. If your vehicle is equipped with “Hydractive III+” suspension, with the engine running at idle, adjust the ground clearance to its maximum height. See chap-ter “Hydractive III+ Suspen-sion”.
3. Switch off the ignition and engage fi rst gear or reverse gear depending on any slope (for a vehicle with automatic gearbox, select position P).
4 If your vehicle is fi tted with “Hydractive III+” suspension, position the chock, whichever direction the gradient may be in, in front of the front wheel diametrically opposite to the one to be replaced.
5. Position the jack at one of the four jacking-points provided on the subframe close to the wheels, then use the handle to unwind the jack until it reaches the ground.
6 Remove the protector from each bolt using tool 3.
7. Slacken the wheel bolts.
8. Continue to extend the jack until the wheel is a few centimetres off the ground.
9. Undo the bolts, remove the wheel.