2008 Citroen C5 DAG Owner's Manual

52
II
A
S T E E R I N G C O L U M N A D J U S T M E N T –
S E A T B E L T H E I G H T A D J U S T M E N T
Adjustment of height and reach of steering wheel
With the vehicle at rest, unlock the steering wheel by pushing con-trol A forwards.
Adjust the height and the reach of the steering wheel, then lock the position by pulling the lever upwards.
As a matter of safety, the adjustments in your driving position must be made only while the vehicle is stationary.
First adjust your seat to the most suitable position, then a djust the position of the steering wheel. See “Driving position”.
Seat belt height adjustment
The correct positioning of the belt strap is through the middle of the shoulder. See “Seat belts”.
To adjust the seat belt for height, compress the control and slide it in the desired direction.

53
II
A
5
43
2
1
6
F R O N T S E A T S
M A N U A L A D J U S T M E N T S
1. Adjustments to the height and angle of the head restraint
To raise it, pull upwards.
To lower it, press on the control A to unlock it, and simultaneously on the head restraint itself. The adjustment is correct when the top edge of the head restraint is at the same height as the top of the head. It is also tilt-adjustable.
To raise it, press control A to unlock it, then pull it upwards.
2. Adjustment of the backrest angle
Use the control to adjust the backrest angle.
It is possible to recline the backrest angle to 45° by pushing it until it locks.
3. Adjustment of the seat height and angle
Raise or lower the control the number of times required to obtain the desired posi-tion.
4. Longitudinal adjustment of seat
Lift the control bar and adjust to the desired position.
5. Adjustment of lumbar support
Turn the control and adjust to the desired position.
6. Heated seat controls
Note: The heated seats only operate when the engine is running.
0: Off.
1: Gentle.
2: Medium.
3: Strong.
For your safety, do not d r i v e w i t h t h e h e a d restraints removed ; t h e s e m u s t b e i n p l a c e a n d c o r r e c t l y adjusted.

54
II
2
1
34
a
b
c
d
F R O N T S E A T S
E L E C T R I C A L A D J U S T M E N T S
To adjust the electrical seats, switch on the ignition or start the engine if the vehicle has gone into economy mode.
2. Adjustment of the backrest angle
Move the control forwards or backwards to adjust the back-rest angle.
3. Adjustment of the angle of the top of the backrest
Move the control forwards or backwards to adjust the angle of the top of the backrest.
4. Adjustment of lumbar support
This function allows you to inde-pendently adjust the height and level of lumbar support.
Move the control:Forwards or backwards to increase or reduce the lumbar support.
Upwards or downwards to raise or lower the lumbar sup-port zone.

55
II
C
B
D
A
F R O N T S E A T S
E L E C T R I C A L A D J U S T M E N T S
The Welcome function
When the driver's door is opened and the ignition is off, the seat moves to ease accessing or leav-ing the vehicle.
Take care not to hinder the for-wards or backwards movement of the seat.
You may activate or deactivate this function using the “Main Menu” on the instrument panel screen. To do so, select “Vehicle parameters / Comfort / Driver welcome”.
Head restraint height and angle adjustments on electric seats
To adjust the angle of the head restraint, push back or pull forward section C of the head restraint until you reach the desired position.
To raise it, pull upwards.
To lower it, press on the control Dto unlock it, and simultaneously on the head restraint itself.
To raise it, press control D to unlock it, then pull it upwards.
0: Off.
1: Gentle.
2: Medium.
3: Strong.
Controls for the heated seats
The front seats can be heated indi-vidually. With the engine running, use control A, located beside the seats to choose between three heating levels:
Massage function
This function provides the driver with a back massage.
To activate the massage, with the engine runnuing, press on but-ton B. The warning lamp comes on and the massage function is acti-vated for a period of 1 hour. During this time, massage is performed in cycles of 6 minutes (4 minutes of massage followed by 2 minutes break). In total, the system will per-form 10 cycles.
After 1 hour, the function is deacti-vated. The warning lamp goes out.
You can deactivate the massage function at any time by pressing on button B.

57
II
1
2
R E A R V I E W M I R R O R S
Operation
Press on button 1.Warning lamp 2 on: automatic mode.
Warning lamp 2 off: automatic mode stopped. The mirror remains in its lightest defi nition.
Note: In order to ensure optimal visibility when manoeuvring, the interior and exterior rear view mir-rors lighten when reverse gear is engaged.

58
II
1
2
R E A R V I E W M I R R O R S
Fold-back of door mirrors
When the vehicle is parked, the door mirrors can be folded back either manually or electrically.
Electric fold-back
From the central position, one press towards the rear on control 1folds the rear view mirrors back.
To return them to the initial position, press again on control 1 towards the rear.
Automatic fold-back on locking
Automatic fold-back operates when you lock the doors.
The opposite movement will take place on unlocking, unless fold-back has been requested using control 1 before switching off the ignition.
Note: Automatic fold-back of the rear view mirrors can be deac-tivated. Contact a CITROËN dealer.
In reverse gear: adjustment of the indexed positions for the passenger’s and driver’s rear view mirrors
With the engine running:
1. Select the (driver's or passen-ger's) rear view mirror using control 1.
2. Engage reverse gear, the mirror glass automatically positions itself to improve your vision of the pavement.
3. Adjust the mirror to your prefer-ence using control 2.
These adjustments are automati-cally memorised.
The rear view mirrors resume their original position:
20 seconds after reverse gear is disengaged.
Once the vehicle reaches a speed of over 10 km/h (6 mph).
Deactivation of the driver's and passenger's indexed rear view mirrors function
To deactivate the function, move control 1 to the central position.
Note: this action cancels the indexing of the rear view mirrors if in progress.

59
II
BC
A
BDC
AC
231
DISPLAY CONFIGURATION
To adjust the display brightness and contrast:
1 Press on A.
2 Using C, select the “Brightness - video adjustments” menu. Con-fi rm by pressing on C on the steering wheel or on D on the radio panel.
3 Select the display confi gura-tion with a press on C. Confi rm by pressing on C on the steer-ing wheel or on D on the radio panel.
4 Select the brightness adjust-ment. Confi rm by pressing on Con the steering wheel or on Don the radio panel.
5 Using C, select normal or alter-native display mode, then vali-date by pressing on C on the steering wheel or on D on the radio panel. To adjust the bright-ness, select “+” or “-” and con-fi rm the adjustment by pressing on C.
6 Validate “OK” on the screen.
Radio - CD
(See “Radio” chapter).
Display confi guration, allowing you to adjust:The display brightness and contrast.
The time and date.
The units used for the outside temperature display.

60
II
BC
A
BDC
A
To choose the units for the outside temperature display:
1 Press on A.
2 Using C, select the “Choice of temperature unit” menu. Con-fi rm by pressing on C on the steering wheel or on D on the radio panel.
3 Select the unit using C. Confi rm by pressing on C on the steer-ing wheel or on D on the radio panel.
4 Validate “OK” on the screen.
To adjust the date and the time:
1 Press on A.
2 Using C, select the “Date and time adjustment” menu. Con-fi rm by pressing on C on the steering wheel or on D on the radio panel.
3 Select the display confi gura-tion with a press on C. Confi rm by pressing on C on the steer-ing wheel or on D on the radio panel.
4 Using B, adjust the date and time, then confi rm by pressing on C on the steering wheel or on D on the radio panel.
5 Press C to select the values you wish to modify. Confi rm by pressing on C on the steer-ing wheel or on D on the radio panel.
6 Validate “OK” on the screen.
Selection of the type of information displayed (MODE)
Consecutive presses on the end of the wiper control stalk or the MODE button on the radio allow you to select the type of informa-tion presented on the multifunction display (date or radio/CD/CD MP3/CD changer).
M U L T I F U N C T I O N D I S P L A Y