Page 167 of 266
IV
Main Menu
Press on the Menu control O to access the Main Menu, then se-lect the “Telephone” icon via but-tons J, M or 8 and then validate the selection via button L or 7.
You have access :
- To the Directory.
- T o C o n fi g u r a t i o n .
- To Communication Management.
You access your choices using J, M or 8 then you validate them with a press on L or 7.
This main menu can also be ac-cessed by pressing button E then button L.
Directory
This menu lets you open :
The telephone Directory of the telephone that is connected.
The Calls List.
This menu can also be accessed with a press on control 11.
Telephone directory
The starting of a telephone call can be done independently of the telephone or of the audio system, thanks to the directory.
The directory is displayed. Select the number via J, M or 8, then vali-date with a press on L or 7.
Observations :
The directory displayed updates itself automatically.
If the person to be called does not fi g u r e i n t h e d i r e c t o r y , t h e c a l l c a n only be made starting from the telephone.
If you have information recorded in the Vcard format, you must se-lect the person you wish to call, then validate. A list of 4 numbers maximum can be displayed with the following labels : “Home”, “Of- fi c e”, “Mobile” and “Car”.
Calls list
After selecting this component and then validating, the calls list is displayed with a maximum of : 10 calls made (arrow pointing up-ward), 10 calls received (arrow pointing downward) and 10 calls not connected.
It is possible to make a call starting from this list : Select the number via J, M or 8, then validate with a press on L or 7.
C o n fi g u r a t i o n
This menu allows you to :
- Delete a twinning.
Using J, M or 8, select this choice then validate via L or 7. Select in the list the telephone that you no longer wish to have twinned. Validate.
- Consult the list of twinnings.
The list of telephones twinned is displayed.
- Connect a mobile telephone that is twinned.
Select the telephone that you wish to connect. This access al-lows you to make a connection manually.
Call management
This menu is accessible during your calls, permitting you to :
- Swap a call if there is another call incoming.
- End a call.
- Be in Secret mode.
Note :
If you are in telephone conver-sation, you have access to this “ C o n fi g u r a t i o n” menu by means of a press on L or 7.
B L U E T O O T H®
Page 196 of 266
A
1
VI
193
C H A N G I N G A W H E E L
REMOVING A WHEEL
1. Park the vehicle on level, sta-ble and non-slippery ground. Apply the parking brake.
Switch off the ignition, check that the parking brake is ap-plied (message and warning lamp in the instrument panel) a n d e n g a g e fi r s t g e a r o r r e -verse gear depending on the slope (P if an automatic gear-box, D or R if a 6-speed elec-tronic gearbox).
2. Use a chock to secure the ve-hicle more safely. Place the chock in front of the wheel that is opposite the wheel affected.
3. Detach the trim using the re-moving tool 4, pulling in the area of the valve.
For vehicles with alloy wheels, insert the trim removing tool 1into the recess in the central trim and lever it off.
For vehicles with alloy wheels that have visible bolts, remove the chromes covers using the tool 2.
Before any operation of this sort, it is advisable to deactivate your pneumatic suspension (see “Pneumatic sus-pension”). When changing a wheel, it is essential to immobil ise the vehicle on ground that is level, stable and non-slippery.
4. Slacken the wheel bolts. For vehicles with alloy wheels, undo the anti-theft bolts using tool 9.
5. Position the jack under the vehicle (see diagrams), at the jacking point A closest to the wheel to be changed.
6. Unwind the jack 5 until its bracket is in contact with the ground. Make sure that the jack is vertical under the jack-ing point used.
7. Continue to extend the jack so as to raise the vehicle.
8. Undo the wheel bolts and re-move the wheel.
Page 199 of 266
196
VITowing with all wheels on the ground
T o w i n g r i n g fi x i n g s a r e p l a c e d a t t h e f r o n t a n d a t t h e r e a r o f t h e v e h i c l e .
To access them:
- at the front : push at top left, then pull on right.
- at the rear : push at bottom, then pull on top.
The cover remains attached to the bumper by means of a tab, so t hat it cannot become lost.
The ignition key should be in position “M” so as to retain steering.
Use a bar with hooks to attach on the towing rings.
If the engine is not running, the steering and braking systems will not be power-assisted.
If towing another vehicle, the latter should be free-wheeling (that is, gearbox in neutral). Failing to respect this point may damage some braking components and lead to the failure of the braking assistance func-tion when the engine is next started.
Removable towing ring
The towing ring is detachable and c a n b e fi t t e d e i t h e r a t t h e f r o n t o r a t the rear of the vehicle. It is stowed with the tools either in the storage fl a p u n d e r t h e s e c o n d - r o w f o o t w e l l or (according to equipment) in the boot well.
T O W I N G - L I F T I N G
Advice
In exceptional circumstances, it is permitted to tow the vehicle at low speed over a short distance(depending on local legislation in force).
In all other cases, the vehicle must be transported by a trans-porter.
CAUTION - TOWING A VEHICLE WITH AUTOMATIC TRANSMISSION
Put the selector lever in posi-tion N (neutral).
Page 216 of 266
55
34
2728
26
25
29
31
32
33
30
35
36
D E S C R I P T I O N O F T H E C O N T R O L S
O N T H E S T E E R I N G W H E E L
25Volume increase.
26
Radio source:Shor t press: Automatic search of higher frequencies.
CD or CD changer source:Shor t press: Search of the next track.Long press: Fast for ward with accelerated sound.
Page 223 of 266
121212
I
B1B2B3B4
C1C2C3C4C5
A1
A2
A3
A4
B1
B2
B3
B4
C1
C2
C3
C4
C5
D
A
B
C
ABCD
A1A2A3A4
N A V I G A T I O N / G U I D A N C E
M E N U S T R U C T U R E
WHAT ARE THE FUNCTIONS OF THE NAVIGATION /GUIDANCE MENU ?
CHOOSE A DESTINATION
Enter a city name, a street name, a street no. or inter -section.Enter the GPS coordinates for a location.
Select a location that is stored in the directory.
Select a location from among the last twenty destina-tions requested.
ENTER STAGES AND ITINERARY
Add a stage to an itinerary after starting a guidance .
Order or delete stages when creating an itinerary.
Divert an itinerary according to the number of kilome -tres (or miles) you will have indicated (for example to a v o i d a t r a f fi c h o l d - u p ) .
Alter the destination initially chosen.
SET PARAMETERS FOR THE GUIDANCE OPTIONS
D e fi n i n g t h e r o u t e c a l c u l a t i o n c r i t e r i a .
Adjust the volume of the voice synthesis.
Activate/Deactivate the pronunciation of a street n ame in the voice instructions.View the types of navigation information available o n the hard disc.Delete the last destinations automatically memorised.
STOP /RESUME THE CURRENT GUIDANCE
Page 234 of 266
232323
IIi
C
B1B2
B3
D1D2D3
B1
B2
B3
C2
D1
D2
D3
C1
C2
C1AB
D
A
B
C
D
A
ACCESSING THE LIST OF MESSAGES
Select the information relating to a geographical a rea.
S e l e c t t h e i n f o r m a t i o n r e l a t i n g t o t r a f fi c .
Select the information relating to built-up areas.
SETTING PARAMETERS FOR MESSAGE ANNOUNCEMENTS
Activate or deactivate the reading of new messages by the NaviDrive voice.Activate or deactivate the display of new TMC mes-sages (do not select the tab for the regions with dens e t r a f fi c ) .
CHOOSING A TMC STATION
Select an automatic TMC search.
Select a manual TMC search.
Access the list of TMC stations.
FILTERING TMC INFORMATION
T R A F F I C I N F O R M A T I O N
A C C E S S I N G T H E M E N U - S T R U C T U R E
HOW TO ACCESS THE TRAFFIC INFORMATION MENU ?
Press button MENU.
Page 237 of 266
262626
IV
B
C
D
D
S e l e c t i o n o f a p r e - d e fi n e d m u s i c a l a m b i a n c e a u t o m a t i c a l l y a d j u s t s b a s s a n d t r e b l e . S e l e c t t h e m u s i c a l a m b i a n c e “ N o n e ” t o personalise your adjustment of bass and treble. A d j u s t m e n t s o f l o u d n e s s , b a s s a n d t r e b l e ( w h e n t h e y a r e a v a i l a b l e ) a r e s p e c i fi c t o e a c h s o u r c e . T h e s o u n d v o l u m e i s a u t o m a t i c a l l y c o r r e c t e d a s a f u n c t i o n o f v e h i c l e s p e e d , p r o v i d e d t h e f a c i l i t y h a s b e e n a c t i v a t e d .
Press button SOURCE.
Rotate the control or use the buttons at the steering B and C to increase or decrease the volume.
How to stop the sound momentarily ?Press on the Mute button D.The sound of the Audio source currently b e i n g l i s t e n e d t o i s c u t . T h e g u i d a n c e instructions remain activated. To restore sound, press on one of the buttons on your NaviDrive, or on one of the controls on the steering wheel.
or
Press on button D to select: t h e p r e - d e fi n e d m u s i c a l a m b i a n c e s ,bass,treble,loudness,front /rear and left /right balanceautomatic correction of the volume as a function of vehicle speed.Rotate the control to modify the value of the parameter displayed.The value is automatically taken into account without the need for validation.
Page 241 of 266
303030
IV
B
DCE
A
G
Press on button BAND to change successivly through the memory banks: F M 1 , F M 2 a n d A M: 2 FM wavebands and 1 AM wavebands for pre-setting the radio stations.FMast : the FM waveband dedicated to the stations memorised automatically (see Autostore function).
