Page 83 of 266
A
B
82
II
A - Headlamp wash
Provided the dipped beams are on, pull the control stalk towards you : screen wash will then be ac-companied by a timed sweep of the wipers as well as by a head-lamp wash.
Check that the front and rear wipers are able to operate freely if you are using a bicycle carrier, for example.
If the windscreen is frozen when you are starting a journey, ma ke sure that you de-ice it before using the front and rear wipers.
Remove any accumulation of snow from the base of the windscreen.
B - Rear screen wipe
Rear screen wipewill deployautomatically, provided the windscreen wipers are operating, when you engage reverse gear.
Activation / deactivation of this function is possible via the “Personalisation - C o n fi g u r a t i o n ” m e n u i n t h e “ M a i n m e n u ” .
Note : Deactivation may be essential if you install a bicycle-carrier on t he tailgate.
Stop.
Intermittent rear screen wipe.
Timed rear screen wash and wipe.
W A S H / W I P E
Page 86 of 266

A
II
85
For safety, these ma-noeuvres should not be performed while the vehi-cle is in motion.
FRONT SEAT BELTS
Fastening
Pull the belt down in front of you in a steady movement, making sure that it does not become twisted.
Press the fastening into its buckle.
Check that it is properly secured and that the automatic locking mechanism operates correctly by pulling sharply on the belt strap.
The abdominal part of the strap should be positioned as low down as possible in the lap and as tight as possible.
ADJUSTING THE STEERING
WHEEL
The steering wheel can be adjusted for height and reach. WITH THE VEHICLE STATION-ARY , fi r s t a d j u s t y o u r s e a t t o t h e most suitable position, then adjust the position of the steering wheel. Unlock the steering wheel by pulling the control A towards you. AAdjust the position of the steering wheel then lock it by pushing the c o n t r o l fi r m l y b a c k i n t o i t s i n i t i a l l o -cation.
Note : I f y o u p r e s s fi r m l y o n y o u r steering wheel after locking, a small click may be heard.
S T E E R I N G W H E E L A D J U S T M E N T
S E A T B E L T A D J U S T M E N T
The chest part should be posi-tioned if possible in the channel of the shoulder.
Each belt has a reel that adjusts its length automatically to the girth of the seat occupant.
Height adjustment
The correct positioning of the seat belt reel is around mid-shoulder level.
To adjust the belt, pinch the con-trol and slide it in the direction re-quired.
Unfastening
To unfasten the belt, press on the red button in the buckle.
The belt retracts automatically when not in use.
Page 96 of 266

AII
95
Activation / Deactivation
You can activate/deactivate the parking assistance by pressing cont
rol A. If the parking assistance is inactive, the warning lamp is on.
Activation or deactivation of the parking assistance is memorised wh en you stop the vehicle.
Notes :
- T h e r e a r p a r k i n g a s s i s t a n c e i s d e a c t i v a t e d a u t o m a t i c a l l y i f a t r a i l e r i s a t t a c h e d t o t h e v e h i c l e . T h e fi t t i n g o f t h e towbar should be carried out by a CITROËN dealer. - T h e r e a r p a r k i n g a s s i s t a n c e i s d e a c t i v a t e d a u t o m a t i c a l l y i f a t r a i l e r i s a t t a c h e d t o t h e v e h i c l e . T h e fi t t i n g o f t h e - T h e r e a r p a r k i n g a s s i s t a n c e i s d e a c t i v a t e d a u t o m a t i c a l l y i f a t r a i l e r i s a t t a c h e d t o t h e v e h i c l e . T h e fi t t i n g o f t h e
- The proximity sensors will not be able to detect obstacles that are situated immediately below or abo ve the bumpers.
- A thin object such as a spike, or a bollard or other similar object, will be detected only at the start of the manœuvre, not when the vehicle has arrived up close.
- In bad weather or in winter, make sure that the sensors are n ot covered by dirt, or by ice or snow.
P A R K I N G A S S I S T A N C E
Page 120 of 266