2008 Citroen C4 PICASSO DAG rear view mirror

12
84
II
REAR VIEW MIRRORS
ADJUSTMENT
This operates with the ignition switched on.
From the driver’s seat position, se-lect the rear view mirror by moving control 1 to the left or right, then adjust the rear view mirror in the four directions by acting on con-trol 2.
Demisting-deicing of the rear view mirrors is coupled with that for the rear screen.
REAR VIEW MIRRORS
FOLDBACK
When the vehicle is parked, the rear view mirrors can be folded back ei-ther manually or electrically.
Electrically
From the central position, a press to the rear on control 1 folds the rear view mirrors back.
The opposite movement is ob-tained by pressing again on the rear of the control.
Electrically and automatically
The rear view mirrors also fold back automatically when you lock the doors.
The rear view mirrors redeploy when you unlock the vehicle, un-less the foldback was performed manually. In this case, you have to press on the rear of the control to deploy them.
Note : The automatic foldback of the rear view mirrors can be deactivated. Contact a CITROËN dealer.
AUTOMATIC TILTING OF
REAR VIEW MIRRORS IN
REVERSE GEAR
This functions enables you to au-tomatically see the ground (pave-ment) when parking using reverse gear.
Adjusting the indexed position of the driver’s and passenger’s rear view mirrors
With the engine running :
- Select the rear view mirror using control 1.
- Engage reverse gear, the glass of the rear view mirror positions itself automatically to give a bet-ter sight of the pavement.
- If necessary, adjust your rear view mirror to your preference by means of the electrical control 2. This position is then memorised.
Stopping the rear view mirror indexing function
To stop the function, move control 1 to the central position.
Note : The rear view mirrors re-turn to their original position :
- 20 seconds after reverse gear has been disengaged,
- once you reach a speed of over 10 km/h (approx. 6 mph).
E X T E R I O R R E A R V I E W M I R R O R S

AB9
0
86
II
SLIDING SUN VISORS
Sliding blinds
Sliding blinds are provided for your protection against bright sunlight. They can be adjusted manually.
- Slide the blind on the visor to the desired position by pushing the area A.
Visor struts
The blinds are extended on the sun visor struts.
Fold the visor downwards, to protect against dazzle to the face.
If dazzle is coming from the side windows, detach the vi-sor from its housing above the centre of the windsc reen and pivot it to the side.
PANORAMIC GLASS ROOF BLIND
Opening the roof blind (positions 1 to 9)
- Rotate the control B to slide the roof blind to the posi-tion desired.
Closing the roof blind (position 0)
- Rotate the control B to position 0 to close the roof blind.The blind has an anti-pinch device.
Note :
- A long press on the locking button on the remote control will close the blind (practical when for example you leave your vehicle on a sunlit carpark).- On returning to your vehicle, a short press on the button B repositions the blind to the last position selected.- Following a fault or after a battery disconnectio n during the movement of the blind or after it has stopped, you have to re-initialise the anti-pinch function. Place the blind in the closed position and press for arou nd 2 seconds on button B.Do not attach or suspend heavy objects on the slide rail of the sun blind, which also incorporates the in-terior rear view mirror.
R O O F A D J U S T M E N T S

1
102
III
B. PASSENGER’S CONTROL PANEL
Adjustment of temperature
- Press on button 1 to take over control of the tem-perature. The warning lamp on button 1 lights up.
- Rotate button 1 to adjust your temperature.
Note : The adjustment of the temperature is continuous and progressive starting from one side.
V E N T I L A T I O N - H E A T I N G M A N U A L A I R C O N D I T I O N I N G
Observation : If your vehicle is not equipped with air conditioning, you will have the same control panel but without the A/C button.
6 - Deicing / demisting of the rear screen
This operates only if the engine is running.
- Press on button 6 to activate/deactivate the electric deicing/demisting of the rear screen and the exterior rear view mirrors. The warning lamp lights up.
The deicing/demisting switches off automatically to prevent excessive consumption of power.
7 - Rapid deicing / demisting of front and rear windows and rear view mirrors
- Press on button 7. The warning lamp lights up.
This function simultaneously activates :
- front deicing/demisting,
- optimum fl ow of air,
- recirculation prohibition,
- deicing/demisting of rear view mirrors and heated rear screen,
- air conditioning if necessary.
To stop the function, press again on button 7.
8 - Adjustment of the air blower temperature
This control is for adjusting the temperature of the air in the passenger compartment. It can be used in cold weather as well as in hot weather, provided the air conditioning is active.
Note : The adjustment of the temperature is continuous and progressive starting from one side.

106
III
A U T O M A T I C A I R C O N D I T I O N I N G
6 - Adjustment mode for the rear passengers8 - Deicing / demisting of the rear screen
This can only operate when the engine is running.
- Press on button 8 to activate/deactivate the electric deicing of the rear screen and, according to version, of the exterior rear view mirrors. The warning lamp lights up and the symbol appears on the display.
It switches off automatically to prevent excessive con-sumption of power
9 - Rapid deicing / demisting of the front and rear windows
- Press on button 9. The warning lamp lights up.
This button decides whether or not the rear passengers may use their adjustment controls.
There are three possible statuses for this button :
Locking of the rear passenger controlsThe driver imposes his adjustment on the rear passengers.
Authorisation of the rear passenger controls
The rear passengers can use their adjustment controls at their conven-ience.
Closing of the air fl ow for the rear passengers
The supply of air is cut off.
7 - Panel display mode : black panel function
This function turns the displays and panel backlighting on or off.
- Function activated, a press on any button will light up the screen temporarily.
- A press on button 7 deactivates the function, lighting of buttons and screen is again permanent.
Note : This function optimises notably the visual comfort for driving at night.
This function gives a rapid deicing / demisting of the vehicle simultaneously with :
- front deicing at optimum temperature,
- optimum air fl ow,
- recirculation prohibition,
- deicing of the rear view mirrors and heated rear screen,
- air conditioning, if necessary.
Press again on button 9 or on « AUTO » to stop the function. Deicing of the rear view mirrors and heated rear screen remains activated.
10 - Air conditioning
- Press on button 10 to activate the air conditioning.
The A/C warning lamp lights up.
With additional air conditioning, in cold weather you are advised to close the supply of air to the rear pas-sengers (no hot air distribution possible via these air vents).

12M
112
III
To recall a memorised driving position
Vehicle stationary, ignition switched on or engine running
- Press briefl y on button 1 or 2 to recallthe corresponding pre-set position.
Note : after fi ve consecutive re-calls of a pre-set position, the function will be deactivated until the engine is started.
Vehicle in motion
- Keep button 1 or 2 pressed to recall the corresponding pre-set position.
Memorisation of driving positions
You can pre-set two driving posi-tions via the buttons located on the side of the seat.
Memorising a driving position
To pre-set a driving position :
- With the ignition on, adjust your seat and your rear view mirrors.
- Press on button M then imme-diately on button 1 “fi rst driving position” or button 2 “second driving position”.
The memorisation will be con-fi rmed by a sound signal. Memo-risation of a new position cancels the previous one.
Do not attempt to pre-set a driving position while the vehicle is moving.
D R I V E R ’ S S E A T

2
2
1
188
VIDirection indicators side repeaters in the rear view mirrors
To change the side repeater, press fi rmly downwards on the zone indi-cated by the arrow, then pull out the side repeater bulb.
C H A N G I N G B U L B S
Interior lamp (1)
Detach the cover of the interior lamp 1 with a thin screwdriver close to the button, to access the bulb.
Bulb : W 5 W
Spotlamps (2)
Detach the cover of the interior lamp. To access the bulb, detach the partition for the spotlamp con-cerned, as necessary.
Bulb: W 5 W
Boot lamps
Detach the unit by pushing it rear-wards.
Bulb: W 5 W
Torch
1. Open the tab.
2. Push with a fl at screwdriver in the hole under the tab and recover the bulb unit.
3. Open the bulb unit fully to change the bulb.
Bulb: Krypton 3.6V.