2008 Citroen C4 warning
[x] Cancel search: warningPage 42 of 257
43
III
C O M F O R T
A i r fl o w t o t h e f a c e l e v e l vents.
T h e h e a t i n g / v e n t i l a t i o n a n d m a n u a l air conditioning systems can only function with the engine running.
1 - A d j u s t m e n t o f t h e a i r d i s t r i b u t i o n
D e m i s t i n g - D e f r o s t i n g .
F l o w t o t h e w i n d s c r e e n a n d f r o n t s i d e w i n d o w s .
D i s t r i b u t i o n t o t h e w i n d - s c r e e n , s i d e w i n d o w s a n d f o o t w e l l s .
F l o w t o f r o n t a n d r e a r p a s s e n g e r f o o t w e l l s .
H E A T I N G / V E N T I L A T I O N
Distribution from the air blower can be altered at will by placing the dis-tributor 1 in an intermediate position.
MANUAL AIR CONDITIONING
2 - Air recirculation
3 - H e a t e r b l o w e r c o n t r o l
The air blower operates only when the engine is running. For optimum comfort in the passenger compart-ment, the control should not remain in position 0 (position 1 m i n i m u m).
4 - T e m p e r a t u r e c o n t r o l
This position is for exclud-ing disagreeable odours or emissions coming from outside the cabin. With a press on control 2, the entry of air from outside is closed off, the lamp comes on.
This should be cancelled as soon as possible to prevent misting and to allow fresh air into the cabin.
To deactivate air recirculation, press again on control 2, the warning lamp goes out.
Page 43 of 257
44
III
C O M F O R T
6 - A i r c o n d i t i o n i n g
The air conditioning will only operate when the engine is running.
5 - R e a r s c r e e n d e m i s t i n g
Can only be operated with the en-gine running.
D e m i s t i n g - d e i c i n g o f t h e w i n d s c r e e n a n d f r o n t s i d e w i n d o w s
One press on control 5 acti-vates the electric demisting of the rear screen and, ac-cording to version, the exte-rior rear view mirrors. The warning lamp comes on.
It switches off automatically to avoid excessive consumption of power.
One press stops the demisting.
A further press starts it again.
Note: If the engine is stopped be-fore the end of demisting, the latter will resume the next time the engine is started.
Press on control 6. The warning lamp comes on.
For air conditioning, the air blower control 3 must not be on position "0".
Air conditioning is obtained by mix-ing the warm air with refrigerated air. The control for the blown air temper-ature 4 adjusts the air conditioning provided the control 6 is operational.
- Place the controls for temperature a n d a i r fl o w o n m a x i m u m .
- Close the central air vents.
- Operate the air conditioning by pressing the control 6, the warning lamp comes on.
Note: you should not be in air recir-culation.
Page 46 of 257
47
III
C O M F O R T
7 - A i r fl o w
Heater blower speed: press button:
9 - D e m i s t i n g - d e i c i n g o f t h e rear screen
When this function is work-ing, the warning lamp comes on and the symbol appears on the display.
This control is for rapid deicing or demisting of the rear screen.
It switches off automatically to avoid excessive consumption of power.
To stop it, press again on the control 9.
P r e s s A U T O t o r e t u r n t h e s y s t e m t o i t s a u t o m a t i c f u n c t i o n .
To increase it
To decrease it.
T h e l e v e l o f a i r fl o w i s r e p r e s e n t e d o n t h e d i s p l a y b y t h e p r o g r e s s i v e fi l l -ing of the fan blades.
A press on the control 7 deactivates the function "AUTO". To restart it, press again on the control AUTO.
Note: to avoid condensation and poor air quality in the passenger compartment, it is recommended a l w a y s t o m a i n t a i n a s u f fi c i e n t fl o w of air.
8 - D e m i s t i n g - d e i c i n g o f t h e w i n d s c r e e n a n d f r o n t s i d e w i n d o w s
While it is operating, the warning lamp lights and the symbol appears on the dis-play.
This control is for rapid deicing or demisting of the windscreen, acting a u t o m a t i c a l l y o n t h e a i r b l o w e r fl o w , air distribution, air conditioning and air entry.
To stop it, press again on control 8or on the control AUTO.
Note: you should not have air recir-culation selected.
Page 53 of 257
54
III
C O M F O R T
F o l d i n g t h e b a c k r e s t
Stow the head restraints.
Press on control A located on the extremity of the backrest and tilt fully forwards.
When returning the seat backrest to the normal position, ensure that it locks into place: the red warning in-dicator, located on the control, must not be visible.
R e m o v i n g t h e s e a t b a s e
To improve seating versatility, the rear seats are removable.
Detach one of the linkages from its securing point, then disengage the other linkage to remove the seat as-sembly.
When you are handling the rear seats, avoid trapping the seat belts and make sure that the belt buckles are positioned correctly.
Page 55 of 257
56
III
C O M F O R T
A u t o m a t i c p h o t o c h r o m i c i n t e r i o r r e a r v i e w m i r r o r
This provides an automatic and pro-gressive changing between day use and night use.
To avoid causing dazzle, the mirror au-tomatically becomes darker depend-ing on the intensity of light coming from the rear. It becomes lighter as soon as brightness diminishes, thus ensuring optimal vision.
To operate
Switch on the ignition and press control 1.
- Warning lamp 2 on: automatic mode.
- Warning lamp 2 off: automatic mode stopped. The mirror remains i n i t s l i g h t e s t d e fi n i t i o n .
Note: for optimal vision, the mirror lightens automatically when reverse gear is engaged.
M a n u a l i n t e r i o r m i r r o r
The lever on the lower edge enables you to place the rear view mirror in either of two positions:
Day position: the lever is not visible.
N i g h t p o s i t i o n ( a n t i d a z z l e ) : the lever is visible.
INTERIOR REAR VIEW MIRROR
Both the height and reach of the steering wheel can be adjusted.
W i t h t h e v e h i c l e a t r e s t , fi r s t a d j u s t the seat to the most suitable posi-tion, then adjust the position of the steering wheel.
STEERING COLUMN ADJUSTMENT
A d j u s t m e n t
Unlock the steering by pulling the control towards you.
Adjust the steering wheel position then lock by pushing the control fully downwards.
I f y o u p r e s s fi r m l y d o w n w a r d s o n your steering wheel after locking, you may hear a slight click. The steering i s t h e n i n i t s d e fi n i t i v e p o s i t i o n .
As a safety measure, do not adjust your driving position while driving.
Page 56 of 257
57
IV
A C C E S S
The key operates all the vehicle’s locks as well as the ignition.
Note: For safety reasons, a buzzer will sound if you have switched off the ignition and opened the driver’s door without previously removing the ignition key.
The key is used to deactivate the pas-senger’s front airbag (see "Safety").
It is dangerous to deadlock the vehicle when someone is inside as unlocking from the interior is impossible (without the remote control).
In the event of loss of the keys go to a CITROËN dealer with proof of ownership of the vehicle.
The CITROËN dealer network will be able to recover the key code and the transponder code to order replacement keys.
Central locking using the key
A brief action with the key locks the vehicle.
Central deadlocking using the key
A second action straight away with the key deadlocks the vehicle. It is then impossible to open the doors from either inside or outside the vehicle.
A long action with the key closes the windows.
Note: With the vehicle stationary and the engine switched off, locking i s s i g n a l l e d b y t h e fl a s h i n g o f t h e interior locking control warning lamp.
If any of the doors, or the boot, is open or not properly closed, central locking does not operate.
KEYS
Electronic immobiliser
The key contains a coded electronic chip. When switching on, the code must be recognised to allow the engine to be started.
This electronic immobiliser locks the engine management system a few seconds after switching off the ignition, and prevents unauthorised starting of the engine.
F o r a n y m o d i fi c a t i o n c o n c e r n i n g the keys it is essential to contact a CITROËN dealer taking the keys it is the keys it all of the keys in your possession with you.
Advice
If the key is not recognised, starting is not possible.
If this occurs, leave your vehicle immobilised and contact a CITROËN If this occurs, leave your vehicle vehicle
dealer.
Page 58 of 257
59
IV
A C C E S S
Guide-me-home lighting
A press on button C operates the guide-me-home lighting (illumination of the sidelamps and dipped beams for approx. one minute).
A second press prior to the end of this timing cancels the guide-me-home lighting.
Locating of the vehicle
To locate the vehicle in a carpark, press button A, the interior lamps come on and the direction indicators fl a s h f o r a f e w s e c o n d s . T h e v e h i c l e remains locked.
Folding and ejection of the key
Button D is for folding and ejecting the key from its housing in the remote control.
If you do not press on button D, you could damage the mechanism.
Except when reinitialising, the remote control cannot function while the key is in the ignition, even when switched off.
Warning: By inadvertently actioning the remote control, when for example it is in your pocket, you can unlock the vehicle without your realising it.
However, if no door is opened with 30 seconds of unloc king, the vehicle locks itself again automatically, without arming the alarm.
Warning: There a is a risk of damage if the replacement battery is not the correct one.
Only use batteries that are identical or equivalent to thos e approved by CITROËNOnly use batteries that are identical or equivalent to thoseOnly use batteries that are identical or equivalent to those.
Changing the remote control battery
Unclip the cover to gain access to the battery.
Battery: CR 0523: 3 V.
Re-initialisation of the remote control
After a change of battery, it is necessary to re-initialise the remote control. To do that, switch on the ignition and immediately action button A on your remote control to trigger the action desired. This may take some ten seco nds.
Do not throw away the old batteries. They should be retur ned to the CITROËN dealer or deposited in a recognised recycling facilityDo not throw away the old batteries. They should be retur ned Do not throw .
Take care not to place the remote control in contact with grease or dust, or leave it in the rain or in a damp environment.
A hard object also on the key ring, pressing on the key while it is in the ignition, can cause a malfunction.
Page 59 of 257
59
IV
A C C E S S
Guide-me-home lighting
A press on button C operates the guide-me-home lighting (illumination of the sidelamps and dipped beams for approx. one minute).
A second press prior to the end of this timing cancels the guide-me-home lighting.
Locating of the vehicle
To locate the vehicle in a carpark, press button A, the interior lamps come on and the direction indicators fl a s h f o r a f e w s e c o n d s . T h e v e h i c l e remains locked.
Folding and ejection of the key
Button D is for folding and ejecting the key from its housing in the remote control.
If you do not press on button D, you could damage the mechanism.
Except when reinitialising, the remote control cannot function while the key is in the ignition, even when switched off.
Warning: By inadvertently actioning the remote control, when for example it is in your pocket, you can unlock the vehicle without your realising it.
However, if no door is opened with 30 seconds of unloc king, the vehicle locks itself again automatically, without arming the alarm.
Warning: There a is a risk of damage if the replacement battery is not the correct one.
Only use batteries that are identical or equivalent to thos e approved by CITROËNOnly use batteries that are identical or equivalent to thoseOnly use batteries that are identical or equivalent to those.
Changing the remote control battery
Unclip the cover to gain access to the battery.
Battery: CR 0523: 3 V.
Re-initialisation of the remote control
After a change of battery, it is necessary to re-initialise the remote control. To do that, switch on the ignition and immediately action button A on your remote control to trigger the action desired. This may take some ten seco nds.
Do not throw away the old batteries. They should be retur ned to the CITROËN dealer or deposited in a recognised recycling facilityDo not throw away the old batteries. They should be retur ned Do not throw .
Take care not to place the remote control in contact with grease or dust, or leave it in the rain or in a damp environment.
A hard object also on the key ring, pressing on the key while it is in the ignition, can cause a malfunction.