2008 Citroen C4 Speed
[x] Cancel search: SpeedPage 23 of 257
26
I
D A S H B O A R D
ESP/ASR warning lamp In operation
When either the ESP or ASR system is brought into operation, the ESP/ASR warning l a m p fl a s h e s .
In the event of a problem
When the vehicle is moving, the li-ghting of the ESP/ASR warning lamp indicates that the system is malfunctioning.
Contact a CITROËN dealer.
Deactivation
Illumination of the ESP/ASR warning lamp and of the ESP control, means that the system is deactivated.
Fuel gauge and low fuel warning
When the tank is full, all the indicator bars are illuminated.
When the low fuel level war-ning comes on, there remain around 7 litres of fuel in the tank and 2 or 3 b a r s o f t h e g a u g e w i l l fl a s h .
If the last bar disappears, there are only around 2 litres of fuel in the tank.
"Foot-on-brake" starting warning lamp for (6 speed) Electronic Gearbox System
During the engine starting phase, t h i s fl a s h e s i f y o u a r e n o t p r e s s i n g the brake pedal.
See "(6 speed) Electronic Gearbox System".
T h i s w a r n i n g l a m p m a y fl a s h i n t h e instrument panel to remind you to apply the brake when engaging re-verse gear.
Complementary to the catalytic c o n v e r t e r , t h i s fi l t e r m a k e s a n a c -tive contribution to the preservation of air quality by the retaining of the unburnt pollutant particles. Black exhaust fumes are thus no longer emitted.
C l o g g i n g o f t h e p a r t i c l e fi l t e r
The SERVICE warning lamp and a message in the instrument panel are displayed indicating that t h e p a r t i c u l a t e fi l t e r i s s t a r t i n g t o become clogged (exceptionally pro-longed urban driving conditions: re- d u c e d s p e e d , t r a f fi c c o n g e s t i o n … ) .
DIESEL PARTICULATE
FILTER SYSTEM
T o r e g e n e r a t e t h e fi l t e r , y o u a r e advised to drive, as soon as traf- fi c c o n d i t i o n s p e r m i t , a t a s p e e d o f 60 km/h (40 mph) or more for at least 5 minutes (until the warning message disappears).
If this alert persists, consult a CITROËN dealer.If this alert persists, this alert
Observation: After prolonged idling or driving at very low speeds, you may occasionally notice water va-pour being emitted from the exhaust when accelerating. This is of no consequence to the running of the vehicle or to the environment.
Diesel fuel additive level
If the additive level is low, a message appears in the multifunction screen, accompanied by an audible signal and illumination of the SERVICE warning lamp: it is necessary to have the additive le-vel topped up. Contact a CITROËN necessary to have the additive le-additive le-
dealer as soon as possible.
Page 24 of 257
26
I
D A S H B O A R D
ESP/ASR warning lamp In operation
When either the ESP or ASR system is brought into operation, the ESP/ASR warning l a m p fl a s h e s .
In the event of a problem
When the vehicle is moving, the li-ghting of the ESP/ASR warning lamp indicates that the system is malfunctioning.
Contact a CITROËN dealer.
Deactivation
Illumination of the ESP/ASR warning lamp and of the ESP control, means that the system is deactivated.
Fuel gauge and low fuel warning
When the tank is full, all the indicator bars are illuminated.
When the low fuel level war-ning comes on, there remain around 7 litres of fuel in the tank and 2 or 3 b a r s o f t h e g a u g e w i l l fl a s h .
If the last bar disappears, there are only around 2 litres of fuel in the tank.
"Foot-on-brake" starting warning lamp for (6 speed) Electronic Gearbox System
During the engine starting phase, t h i s fl a s h e s i f y o u a r e n o t p r e s s i n g the brake pedal.
See "(6 speed) Electronic Gearbox System".
T h i s w a r n i n g l a m p m a y fl a s h i n t h e instrument panel to remind you to apply the brake when engaging re-verse gear.
Complementary to the catalytic c o n v e r t e r , t h i s fi l t e r m a k e s a n a c -tive contribution to the preservation of air quality by the retaining of the unburnt pollutant particles. Black exhaust fumes are thus no longer emitted.
C l o g g i n g o f t h e p a r t i c l e fi l t e r
The SERVICE warning lamp and a message in the instrument panel are displayed indicating that t h e p a r t i c u l a t e fi l t e r i s s t a r t i n g t o become clogged (exceptionally pro-longed urban driving conditions: re- d u c e d s p e e d , t r a f fi c c o n g e s t i o n … ) .
DIESEL PARTICULATE
FILTER SYSTEM
T o r e g e n e r a t e t h e fi l t e r , y o u a r e advised to drive, as soon as traf- fi c c o n d i t i o n s p e r m i t , a t a s p e e d o f 60 km/h (40 mph) or more for at least 5 minutes (until the warning message disappears).
If this alert persists, consult a CITROËN dealer.If this alert persists, this alert
Observation: After prolonged idling or driving at very low speeds, you may occasionally notice water va-pour being emitted from the exhaust when accelerating. This is of no consequence to the running of the vehicle or to the environment.
Diesel fuel additive level
If the additive level is low, a message appears in the multifunction screen, accompanied by an audible signal and illumination of the SERVICE warning lamp: it is necessary to have the additive le-vel topped up. Contact a CITROËN necessary to have the additive le-additive le-
dealer as soon as possible.
Page 29 of 257
30
I
D A S H B O A R D
A f t e r t h e fi r s t p r e s s o n c o n t r o l C, only the top part of the display re-mains illuminated.
A second press on control C triggers black panel mode.
This function switches off certain of the displays, for night driving. It can be activated:
- either by 2 presses on control C
- or by 1 press on control D if this control has been programmed with the black panel function.
DARK BUTTONBLACK PANEL (with headlamps on)
The instrument panel continues to show vehicle speed as well as the cruise control and speed limiter functions if these are activated.
I f t h e r e i s a n a l e r t o r a m o d i fi c a t i o n of functions or adjustments, black panel is interrupted.
To programme control D:
- give a long press on control D,
- then select the black panel function on the multifunction screen using the arrowed buttons on your radio/CD or Navidrive system. Validate with a press on "OK".
Note: the dashboard lighting rheostat still operates in black panel mode.
Page 32 of 257
33
II
M U L T I F U N C T I O N D I S P L A Y
To display the log of alerts
- Press on A.
- Using B, select the sub-menu for o p t i o n s . C o n fi r m w i t h t w o p r e s s e s on C.
Note: You can cancel the start of the display by selecting E to abandon, validate with a press on C.
The alerts that have previously been signalled to you but not resolved, are recalled to you in a scroll. To delete the display of an alert, press D.
To adjust the date and time
- Press on A.
- Using B, select the sub-menu for Display Adjustments then validate with a press on C.
- Using B, select what you wish to modify: year, month, day, hour, minutes, or display mode.
- M a k e y o u r a d j u s t m e n t b y p r e s s e s on E or F or. You can continue your adjustments, selecting further parameters by pressingB . W h e n y o u h a v e fi n i s h e d y o u r adjustments, press C.
To choose the language
- Press on A.
- Using B, select the sub-menu for L a n g u a g e s . C o n fi r m y o u r c h o i c e with a press on C.
- By presses on E or F or, select the language of your choice then validate with a press on C.
To choose the units
- Press on A.
- Using B, select the sub-menu for U n i t s . C o n fi r m y o u r c h o i c e w i t h a press on C.
- Using B, select the unit you wish to modify (Temperature or Consumption).
- Via presses on E or F or, select the unit of your choice, then validate with a press on C.
Note: This choice concerns all the types of information (fuel consumption, speed, etc.) that appear on the displays.
Page 35 of 257
36
II
M U L T I F U N C T I O N D I S P L A Y
To choose units
- Press on A.
- Use B to select the icon "Personalisation-Configuration" t h e n c o n fi r m y o u r c h o i c e w i t h a press on C.
- S e l e c t t h e d i s p l a y c o n fi g u r a t i o n using B . C o n fi r m w i t h a p r e s s o n C.
- Then select the sub-menu for U n i t s . C o n fi r m w i t h a p r e s s o n C.
- Using B, select the unit to b e m o d i fi e d ( T e m p e r a t u r e o r Consumption) then validate with a press on C.
- Validate on "OK" on the display.
Note: This choice concerns all the types of information (fuel consumption, speed, etc.) that appear on the displays.
To choose the language
- Press on A.
- Use B to select the icon "Personalisation-Configuration" t h e n c o n fi r m y o u r c h o i c e w i t h a press on C.
- Select the choice of language, using B.
- Using B, select the desired language and validate your choice with a press on C.
- Validate on "OK" on the display.
To adjust the date and time
- Press on A.
- Use B to select the icon "Personalisation-Configuration" t h e n c o n fi r m y o u r c h o i c e w i t h a press on C.
- S e l e c t t h e d i s p l a y c o n fi g u r a t i o n using B . C o n fi r m w i t h a p r e s s on C.
- Select the date and time adjustment, using B , t h e n c o n fi r m with a press on C.
- Use B to select the values to be m o d i fi e d . C o n fi r m w i t h a p r e s s o n C.
- M a k e y o u r a d j u s t m e n t s u s i n g B, validating each adjustment with a press on C.
- Validate on "OK" on the display.
Page 39 of 257
40
II
M U L T I F U N C T I O N D I S P L A Y
Display ADisplay C or NaviDrive (continued)RangeThis indicates the mileage that can still be travelled using the f u e l r e m a i n i n g i n t h e t a n k .When the distance remaining to be travelled is less than abo ut 2 5 k m ( a p p r o x . 1 5 m i l e s ) , o n l y t h r e e d a s h e s a r e d i s p l a y e d .After resetting the computer, the indication of remaining range is only reliable after the vehicle has been used for a certain time.
Average fuel consumption
The average fuel consumption is calculated from the last reset of the computer.
Instantaneous fuel consumption
This is calculated from consumption over the previous 2 seconds. T h i s f u n c t i o n i s o n l y a v a i l a b l e w h e n t r a v e l l i n g a t o v e r 3 0 k m / h (approx. 20 mph).
Average speed
The average speed is obtained, from the last reset of the c o m p u t e r , b y d i v i d i n g t h e d i s t a n c e c o v e r e d b y t h e t i m e t a k e n (ignition on).
Distance travelled
It indicates the distance travelled since the trip computer was last reset to zero.
Distance remainingSee previous page.
Page 46 of 257
47
III
C O M F O R T
7 - A i r fl o w
Heater blower speed: press button:
9 - D e m i s t i n g - d e i c i n g o f t h e rear screen
When this function is work-ing, the warning lamp comes on and the symbol appears on the display.
This control is for rapid deicing or demisting of the rear screen.
It switches off automatically to avoid excessive consumption of power.
To stop it, press again on the control 9.
P r e s s A U T O t o r e t u r n t h e s y s t e m t o i t s a u t o m a t i c f u n c t i o n .
To increase it
To decrease it.
T h e l e v e l o f a i r fl o w i s r e p r e s e n t e d o n t h e d i s p l a y b y t h e p r o g r e s s i v e fi l l -ing of the fan blades.
A press on the control 7 deactivates the function "AUTO". To restart it, press again on the control AUTO.
Note: to avoid condensation and poor air quality in the passenger compartment, it is recommended a l w a y s t o m a i n t a i n a s u f fi c i e n t fl o w of air.
8 - D e m i s t i n g - d e i c i n g o f t h e w i n d s c r e e n a n d f r o n t s i d e w i n d o w s
While it is operating, the warning lamp lights and the symbol appears on the dis-play.
This control is for rapid deicing or demisting of the windscreen, acting a u t o m a t i c a l l y o n t h e a i r b l o w e r fl o w , air distribution, air conditioning and air entry.
To stop it, press again on control 8or on the control AUTO.
Note: you should not have air recir-culation selected.
Page 63 of 257
63
IV
A C C E S S
If you decide to drive with the doors locked, remem-ber that in the event of an accident this renders a c c e s s m o r e d i f fi c u l t f o r t h e emergency services.
Locking the doors from the inside
With the doors closed, press button B once to operate the electric central locking and unlocking.
The doors can still be opened from inside.
The central locking will not operate if a door is open, or not properly closed.
The lamp on the control B can signal any of 3 statuses:
- I t fl a s h e s i f t h e d o o r s a r e o p e n when the vehicle is stationary, engine stopped.
- It lights up if the doors are locked and the ignition is switched on.
- It goes out if the doors are not locked.
DOORSNote: Control B is inactive if the vehicle has been locked with the remote control or with the key.
Personal security
When the vehicle is started, the system automatically locks the doors and tailgate as soon as you reach a speed of approx. 10 km/h (6 mph).
Note: If a door is opened, this door will automatically relock as soon as the vehicle reaches approx. 6 mph.
Activation/Deactivation of the function
After switching on the ignition, give a long press on the central unlocking button until a message is displayed.
This allows from the front, deactivation of the opening of the rear doors and the use of the rear windows.
It is activated by means of a press on control A located on the electric windows control panel. The warning lamp in the instrument panel lights up for approx. 10 seconds.
Each time the ignition is switched on, the warning lamp comes on for approx. 10 seconds.
Opening of the doors from the outside and operation of the rear electric windows remain possible from the front of the vehicle.
Electric child safety