2008 Citroen C4 DAG ignition
[x] Cancel search: ignitionPage 27 of 257
28
I
D A S H B O A R D
Functioning if the service interval is exceeded
Each time the ignition is switched on, the maintenance symbol and the extra mileage travelled (with a minus i n f r o n t ) w i l l fl a s h .
For example: the preset service dis-tance has been exceeded by 300 km. Your vehicle must be serviced as soon as possible.
A few seconds after you have switched on the ignition, the total mileage recorder returns to its nor-mal operation and the maintenance symbol remains illuminated.
Resetting the mileage indicator to zero
Your CITROËN dealer performs this operation after each service. How-ever, if you carry out the servicing yourself, the procedure for resetting to zero is as follows:
- Switch off the ignition, then place the key on position S, steering lock.
- Press control 1 and keep it pressed.
- Switch on the ignition.
- Keep control 1 pressed until the zero appears and the maintenance symbol disappears.
- Switch off the ignition.
Maintenance intervals
If your vehicle is used in particularly harsh conditions, it is necessary to select the maintenance schedules for "special operating conditions" (see the Maintenance Guide) which consist of more frequent services.
Page 28 of 257
29
I
D A S H B O A R D
When the ignition is switched on, the oil level indicator is displayed for several seconds.This display indicates normal oper-ating.
A fl a s h i n g o f "OIL" indicates an oil level that is below the minimum.
Check using the manual dipstick.
Check the oil level with the vehicle on horizontal ground, the engine having been switched off for at least 15 minutes.
A fl a s h i n g o f "OIL --" indicates a malfunction of the indicator.
Consult your CITROËN dealer.
ENGINE OIL LEVEL INDICATOR
The rheostat is active if the sidelamps are on and applies to:
- the instrument panel
- the displays
The desired brightness is selected via control A or by pressing control AB.
With control B, press until the bright-ness is at maximum. Release, press until you reach minimum.
DASHBOARD LIGHTING RHEOSTAT
Page 39 of 257
40
II
M U L T I F U N C T I O N D I S P L A Y
Display ADisplay C or NaviDrive (continued)RangeThis indicates the mileage that can still be travelled using the f u e l r e m a i n i n g i n t h e t a n k .When the distance remaining to be travelled is less than abo ut 2 5 k m ( a p p r o x . 1 5 m i l e s ) , o n l y t h r e e d a s h e s a r e d i s p l a y e d .After resetting the computer, the indication of remaining range is only reliable after the vehicle has been used for a certain time.
Average fuel consumption
The average fuel consumption is calculated from the last reset of the computer.
Instantaneous fuel consumption
This is calculated from consumption over the previous 2 seconds. T h i s f u n c t i o n i s o n l y a v a i l a b l e w h e n t r a v e l l i n g a t o v e r 3 0 k m / h (approx. 20 mph).
Average speed
The average speed is obtained, from the last reset of the c o m p u t e r , b y d i v i d i n g t h e d i s t a n c e c o v e r e d b y t h e t i m e t a k e n (ignition on).
Distance travelled
It indicates the distance travelled since the trip computer was last reset to zero.
Distance remainingSee previous page.
Page 50 of 257
51
III
C O M F O R T
H e a t e d s e a t s
The front seats can be heated inde-pendently. Use the controls placed on the sides of the seats, turning them to select one of three heating levels:
0: Off.
1: Gentle heat.
2: Medium heat.
3: Strong heat.
The seat temperature will adjust accordingly.
Note: The heated seats will only operate when the engine is running.
Note: The seats can still be moved on a temporary basis:
- when opening one of the front doors.
- after switching off the ignition.
E l e c t r i c a l l y o p e r a t e d a d j u s t m e n t s
A d j u s t m e n t o f s e a t h e i g h t , a n g l e a n d r e a c h
A d j u s t m e n t o f b a c k r e s t a n g l e a n d l u m b a r s u p p o r t
Raise or lower the front of control 1 to make the front of the seat cushion higher or lower.
Raise or lower the rear of control 1 to make the seat higher or lower.
Action control 1 to the front or to the rear to move the seat forward or back.
Push the top of control 2forward or back to adjust the backrest angle.
Raise or lower control 2to increase or decrease the lumbar support.
Page 51 of 257
52 III
C O M F O R T
M e m o r i s a t i o n o f d r i v i n g positions
You have the possibility to memorise two driving positions, via the buttons M / 1 and M / 2.
M e m o r i s a t i o n u s i n g t h e b u t t o n s
To memorise, using the buttons located on the side of the seat:
- turn the ignition key to the drive position,
- adjust your seat and your exterior rear view mirrors,
- press on button M then imme-diately on button 1 " fi r s t d r i v i n g position" or on button 2 "second driving position".
The memorisation is recognised by an audible signal. Memorising of a new position cancels the previous one.
R e c a l l o f a m e m o r i s e d d r i v i n g position
V e h i c l e s t o p p e d (ignition on or engine running)
- P r e s s b r i e fl y o n b u t t o n 1 or 2 or to recall the corresponding memo-rised position.
Note: a f t e r fi v e c o n s e c u t i v e r e c a l l s of a memorised position, this func-tion will be deactivated until the engine is started.
V e h i c l e m o v i n g
- Keep button 1 or 2 pressed to recall the corresponding memo-rised position.
Page 54 of 257
55
III
C O M F O R T
DOOR MIRRORS
A d j u s t m e n t o f r e a r v i e w m i r r o r s
Functions with ignition switched on.
From the driver’s position, select the rear view mirror via the control 1, then adjust in the four directions by moving the control 2.
Deicing of rear view mirrors is cou-pled with electric demisting of the rear screen.
F o l d - b a c k o f d o o r m i r r o r s
When the vehicle is parked, the door mirrors can be folded back either manually or electrically.
E l e c t r i c f o l d - b a c k
From the central position, one press towards the rear on control 1 folds the rear view mirrors back.
To return them to the initial position, press again on the control towards the rear.
A u t o m a t i c e l e c t r i c f o l d b a c k
Automatic fold-back operates when you lock the doors with the remote control.
The opposite movement applies when you unlock the doors, except if you operated fold-back before switching off the ignition.
Note: Automatic fold-back of the rear view mirrors can be deactivated. Consult your CITROËN dealer.
A u t o m a t i c t i l t i n g o f m i r r o r s w h e n r e v e r s i n g
Ths function automatically gives you a view of the ground while reversing the vehicle.
Activation
With the engine running:
- Select the rear view mirror using control 1.
- Engage reverse gear, the mirror glass automatically positions itself to improve your vision of the pave-ment.
- If necessary, adjust the mirror to your preference using the electric control 2.
Deactivation
To deactivate the function, move control 1 to the central position.
Page 55 of 257
56 III
C O M F O R T
A u t o m a t i c p h o t o c h r o m i c i n t e r i o r r e a r v i e w m i r r o r
This provides an automatic and pro-gressive changing between day use and night use.
To avoid causing dazzle, the mirror automatically becomes darker depend-ing on the intensity of light coming from the rear. It becomes lighter as soon as brightness diminishes, thus ensuring optimal vision.
To operate
Switch on the ignition and press control 1.
- Warning lamp 2 on: automatic mode.
- Warning lamp 2 off: automatic mode stopped. The mirror remains i n i t s l i g h t e s t d e fi n i t i o n .
Note: for optimal vision, the mirror lightens automatically when reverse gear is engaged.
M a n u a l i n t e r i o r m i r r o r
The lever on the lower edge enables you to place the rear view mirror in either of two positions:
Day position: the lever is not vis-ible.
N i g h t p o s i t i o n ( a n t i d a z z l e ) : the lever is visible.
INTERIOR REAR VIEW MIRROR
Both the height and reach of the steering wheel can be adjusted.
W i t h t h e v e h i c l e a t r e s t , fi r s t a d j u s t the seat to the most suitable posi-tion, then adjust the position of the steering wheel.
STEERING COLUMN ADJUSTMENT
A d j u s t m e n t
Unlock the steering by pulling the control towards you.
Adjust the steering wheel position then lock by pushing the control fully downwards.
I f y o u p r e s s fi r m l y d o w n w a r d s o n your steering wheel after locking, you may hear a slight click. The steering i s t h e n i n i t s d e fi n i t i v e p o s i t i o n .
As a safety measure, do not adjust your driving position while driving.
Page 56 of 257
57
IV
A C C E S S
The key operates all the vehicle’s locks as well as the ignition.
Note: For safety reasons, a buzzer will sound if you have switched off the ignition and opened the driver’s door without previously removing the ignition key.
The key is used to deactivate the passenger’s front airbag (see "Safety").
It is dangerous to deadlock the vehicle when someone is inside as unlocking from the interior is impossible (without the remote control).
In the event of loss of the keys go to a CITROËN dealer with proof of ownership of the vehicle.
The CITROËN dealer network will be able to recover the key code and the transponder code to order replacement keys.
Central locking using the key
A brief action with the key locks the vehicle.
Central deadlocking using the key
A second action straight away with the key deadlocks the vehicle. It is then impossible to open the doors from either inside or outside the vehicle.
A long action with the key closes the windows.
Note: With the vehicle stationary and the engine switched off, locking i s s i g n a l l e d b y t h e fl a s h i n g o f t h e interior locking control warning lamp.
If any of the doors, or the boot, is open or not properly closed, central locking does not operate.
KEYS
Electronic immobiliser
The key contains a coded electronic chip. When switching on, the code must be recognised to allow the engine to be started.
This electronic immobiliser locks the engine management system a few seconds after switching off the ignition, and prevents unauthorised starting of the engine.
F o r a n y m o d i fi c a t i o n c o n c e r n i n g the keys it is essential to contact a CITROËN dealer taking the keys it is the keys it all of the keys in your possession with you.
Advice
If the key is not recognised, starting is not possible.
If this occurs, leave your vehicle immobilised and contact a CITROËN If this occurs, leave your vehicle vehicle
dealer.