
At a glance
 11Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
7Instrument cluster12
10Ignition lock54
11Buttons on the steering wheel12Horn: the entire surface
13Adjusting the steering wheel46
15Releasing the hood218
16Opening the luggage compartment lid33 6
Turn signals63
High beams, headlamp flasher94
Roadside parking lamps
*94
Computer68
Settings and information about the 
vehicle71
Instrument lighting94
8
Windshield wipers64
Rain sensor
*64
9Switching the ignition on/off and 
starting/stopping the engine54
Telephone
*:
>Press: accepting and ending a 
call, starting dialing
* selected 
phone numbers. Redialing if 
no phone number is selected
>Press longer: redialing
Volume
Activating/deactivating voice com-
mand system
*23
Changing radio station
Selecting music track
Scrolling through phone book and 
lists with stored phone numbers
MDrive*, calling up individual 
settings47 
Individually programmable
*47 
Individually programmable47 
14
Cruise control65 

Driving
64 6.Select "Triple turn signal" and press the 
controller.
 Triple turn signaling is activated.
The setting is stored for the remote control cur-
rently in use.
Wiper system
1Switching on wipers
2Switching off wipers or brief wipe
3Activating/deactivating intermittent wipe or 
rain sensor
*
4Cleaning windshield and headlamps
5Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
Switching on wipers
Press the lever upward, arrow 1.
The lever automatically returns to its initial posi-
tion when released.
Normal wiper speed
Press once.
The system switches to operation in the inter-
mittent mode when the vehicle is stationary.
Fast wiper speed
Press twice or press beyond the resistance 
point. 
The system switches to normal speed when the 
vehicle is stationary.
Intermittent wipe or rain sensor*
If the car is not equipped with a rain sensor, the 
intermittent-wipe time is a preset.
If the car is equipped with a rain sensor, the time 
between wipes is controlled automatically and 
depends on the intensity of the rainfall. The rain 
sensor is mounted on the windshield, directly in 
front of the interior rearview mirror.
Activating intermittent wipe or rain 
sensor
Press the button, arrow3. The LED in the but-
ton lights up.
Setting speed for intermittent wipe or 
sensitivity of the rain sensor
Turn knurled wheel5 up or down.
Deactivating intermittent wipe or rain 
sensor
Press the button again, arrow3. 
The LED goes out.
Deactivate the rain sensor before enter-
ing an automatic car wash. Failure to do 
so could result in damage caused by undesired 
wiper activation.<
Cleaning windshield and headlamps
Pull the lever, arrow 4.
Washer fluid is sprayed onto the windshield and 
the wipers are operated for a short time. 

Care
214
Care
Care products
Regular cleaning and care contributes signifi-
cantly to the value retention of your BMW.
BMW recommends cleaning and caring for your 
vehicle with products that are approved by 
BMW for this purpose.
Your BMW center will be happy to advise you on 
the products and services available for cleaning 
and caring for your BMW.
Original BMW CareProducts have been 
material tested, laboratory checked and 
proven in the field, and offer optimal care and 
protection for your vehicle.<
Do not use cleaners that contain alcohol 
or solvents as these may result in dam-
age.<
Cleaning agents can contain substances 
that are dangerous or hazardous to your 
health. Therefore, follow the warning and safety 
instructions on the packaging. When cleaning 
inside the vehicle, always open the doors or 
windows of the vehicle. In enclosed areas, pro-
vide for sufficient ventilation. Only use products 
designed for cleaning vehicles.<
Exterior care
Washing the vehicle
Especially during the winter months, 
ensure that the vehicle is washed more 
frequently. Heavy soiling and road salt can lead 
to vehicle damage.<
After washing the vehicle, apply the 
brakes briefly to dry them, otherwise 
water can reduce braking efficiency over the 
short term and the brake discs can corrode.<
Automatic car washes
Preference should be given to cloth car washes.
Before driving into a car wash, ensure that it is 
suitable for your BMW. Check the following:>Dimensions of your vehicle, refer to 
page239.
>If necessary: fold in the exterior mirrors, 
refer to page45.
>Maximum permissible tire width.
Preparations before driving into an automatic 
car wash:
>Deactivate the rain sensor
* to avoid unin-
tentional activation of the wipers.
>Remove additional attachments, e.g. 
spoiler or telephone antennas, if there is a 
possibility that they could be damaged.
M dual clutch transmission
Before driving into an automatic car wash, per-
form the following steps to ensure that the vehi-
cle can roll:
1.Insert the remote control, even with conve-
nient access, into the ignition lock.
2.Engage transmission position N.
3.Release the parking brake.
4.Switch off the engine.
5.Leave the remote control in the ignition lock 
so that the vehicle can roll.
Steam jets / high-pressure washers
When using steam jets or high-pressure 
washers, ensure that you maintain a suffi-
cient clearance to the vehicle and do not exceed 
a temperature of 1407/606. 
Insufficient clearance or excessive pressure or 
temperature can lead to component damage or 
water penetration. Follow the operating instruc-
tions of the high-pressure washer.<
When using high-pressure washers, do 
not spray against the sensors and cam-
eras, e.g. Park Distance Control, for an 
extended period and maintain a distance of at 
least 12 in/30 cm.< 

Mobility
 215Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Washing the car manually
When washing the vehicle by hand, use large 
quantities of water and car shampoo if neces-
sary. Clean the vehicle with a sponge or wash-
ing brush, applying light pressure only.
Before cleaning the windshield, deacti-
vate the rain sensor or switch off the igni-
tion to prevent unintentional activation of the 
wipers.<
Observe local regulations pertaining to 
washing vehicles by hand.<
Headlamps
Do not rub them dry and do not use abrasive or 
corrosive cleaning agents.
Remove contamination, such as insects, by 
soaking with shampoo or insect remover and 
then rinsing with plenty of water.
Thaw ice with a windshield de-icer and do not 
use an ice scraper.
Windows
Clean the inside and outside surfaces of the 
windows and the mirrors with window cleaner.
Do not clean the mirrors with cleaners 
containing quartz.<
Wiper blades
Clean with soapy water and replace regularly to 
avoid streaking.
Wax and preservative residue and con-
tamination on the window can lead to 
streaking when operating the windshield wip-
ers, leading to premature wear of the wiper 
blades and causing the rain sensor to malfunc-
tion.<
Paintwork care
Regular care contributes to value retention and 
protects the paintwork against the long-term 
effects of damaging substances.
Region-specific environmental influences can 
damage the vehicle paintwork. Therefore, it is 
important to adapt the frequency and scope of 
car care accordingly.Immediately remove very aggressive sub-
stances, e.g. spilled fuel, oil, grease, tree resin 
or bird droppings, to prevent damage to the 
paintwork.
Repairing paintwork damage
Immediately repair scratches or similar 
damage, such as that caused by stones 
hitting the vehicle, where necessary to prevent 
rusting.<
BMW recommends having paintwork damage 
repaired by a professional paint repair work-
shop according to BMW specifications using 
original BMW paint materials.
Preservation
A preservation treatment is necessary when 
water no longer beads off of the clean paintwork 
surface. Only use products for paintwork pres-
ervation that contain carnauba or synthetic 
waxes.
Rubber seals
Treat only with water or rubber care products.
Do not use silicon-containing care prod-
ucts on rubber seals, otherwise noise and 
damage could occur.<
Chrome parts
Carefully clean vehicle parts, such as the radia-
tor grill, door handles or window frames, with 
copious quantities of water and a shampoo 
additive. For additional treatment, use a chrome 
polish.
Light-alloy wheels
For technical reasons, dust is generated during 
braking that is deposited on the light-alloy 
wheels. Remove the dust regularly using acid-
free rim cleaner.
Do not use aggressive, acidic, strongly 
alkaline and abrasive cleaning agents or 
steam jets over 1407/606, otherwise dam-
age may occur.< 

Mobility
 233Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
headlamps, tail lamps, turn signal indicators and 
windshield wipers may be unavailable.
Power steering assistance is not available when 
the engine is not running. Thus, braking and 
steering will require increased effort.<
Manual transmission
Gearshift lever in neutral position.
M dual clutch transmission with 
Drivelogic
Ensure that the parking lock P is not 
engaged as the rear wheels will otherwise 
be blocked. 
When using the car wash function, refer to 
page56, note that the parking lock P is 
engaged automatically after approx. 30 min-
utes, blocking the rear wheels.
If an electrical malfunction occurs or if towing 
takes longer than approx. 20 minutes, manually 
release the parking lock, refer to page59.<
When towing, do not exceed a maximum 
speed of 30 mph/50 km/h and a maxi-
mum distance of 30 miles/50 km, otherwise the 
transmission can be damaged.<
BMW recommends transporting the vehicle on 
a tow truck with a flat bed.
Towing methods
Do not lift the vehicle by a tow fitting or 
body and chassis parts, otherwise dam-
age may result.<
With a tow bar
The towing vehicle must not be lighter 
than the towed vehicle, otherwise it may 
be impossible to maintain control.<
The tow fittings used should be on the same 
side on both vehicles. Should it prove impossi-
ble to avoid mounting the tow bar at an angle, 
please observe the following:
>Clearance and maneuvering capability will 
be sharply limited during cornering.
>The tow bar will generate lateral forces if it is 
attached offset.Attach the tow bar to the tow fittings only, 
as attaching it to other parts of the vehicle 
could result in damage.<
With a tow rope
When starting off in the towing vehicle, make 
sure that the tow rope is taut.
To avoid jerking and the associated 
stresses on vehicle components when 
towing, always use nylon ropes or nylon straps. 
Attach the tow rope to the tow fittings only, as 
attaching it to other parts of the vehicle could 
result in damage.<
With a tow truck
Manual transmission:
Have the BMW transported with a tow truck 
with a so-called lift bar or on a flat bed.
Do not tow the vehicle with just the rear axle 
raised as this may cause the steering to turn.
M dual clutch transmission:
Have the BMW transported with a tow truck 
with a so-called lift bar or on a flat bed.
Tow-starting
If possible, do not tow-start the vehicle but 
jump-start the engine, refer to page231. Vehi- 

Reference 253
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Heating and ventilation, refer 
to Climate96
Heating while at a standstill, 
refer to Using residual 
heat99
Heavy loads, refer to Stowing 
cargo117
Height, refer to 
Dimensions239
Height adjustment
– seats41
– steering wheel46
High beams94
– headlamp flasher94
– indicator lamp13
High Definition Radio159
High-pressure 
washer214,215
High water, refer to Driving 
through water115
Highways, refer to Route 
criteria137
Hills115
Holders for cups107
Home address136
"Home address" in 
navigation137
Homepage BMW4
Hood218
Hooks for shopping bags109
Horn10,11
Hotel function33
Hot exhaust system114
"Hour memo"76
"House number" in 
destination entry129
Hydraulic brake assist, refer to 
Brake assist82
Hydroplaning115
I
IBOC, refer to High Definition 
Radio159
Ice warning, refer to Outside 
temperature warning67
ID3 tag, refer to Information 
about the track167Identification marks, tire 
coding208
iDrive16
– adjusting brightness80
– assistance window20
– automatic climate control97
– changing language79
– changing units of measure 
and display format71
– confirming selection or 
entry19
– controls16
– displays, menus17
– menu guidance17
– operating principle16
– overview16
– selecting a menu item19
– setting the date and time74
– start menu17
– status information20
– switching menu pages19
– symbols18
iDrive operating principle16
Ignition54
– switched off55
– switched on54
Ignition key, refer to Remote 
control28
Ignition key position 1, refer to 
Radio readiness54
Ignition key position 2, refer to 
Ignition on54
Ignition lock54
i menu18
Imprint2
Indicator and warning 
lamps13
– MDrive49
– M Dynamic Mode83
– Tire Pressure Monitor 
TPM88
Individual air distribution97
Individually programmable 
buttons on steering 
wheel47
Inflation pressure, refer to Tire 
inflation pressure206Inflation pressure monitoring, 
refer to Tire Pressure 
Monitor TPM86
Information
– on another location132
– on country132
– on current position132
– on destination location132
Information menu, refer to 
i menu18
"Information on 
destination"134
"Info sources"73
Initializing
– after power failure228
– compass, refer to Digital 
compass, calibrating104
– Flat Tire Monitor FTM85
– glass roof39
"Input map"131
Installation location
– CD changer169
– navigation DVD drive124
– telephone106
Instructions for navigation 
system, refer to Voice 
instructions142
Instrument cluster12
Instrument lighting94
Instrument panel, refer to 
Cockpit10
Integrated key28
Integrated universal remote 
control102
Interesting destination for 
navigation132
"Interim time"79
Interior lamps95
– remote control30
Interior motion sensor35
Interior rearview mirror46
– automatic dimming 
feature46
– compass104
Intermittent mode of the 
wipers64 

Everything from A - Z
262 Volume distribution
– front/rear153
– left/right153
W
Warning and indicator 
lamps13
Warning messages, refer to 
Check Control77
Warning triangle231
Washer fluid65
– content of the reservoir65
Washer fluid reservoir65
Waste tray, refer to 
Ashtray107
Water on roads, refer to 
Driving through water115
Water penetration214,215
Waveband with the radio156
Wear indicators in tires, refer 
to Minimum tread depth209
Weights240
Welcome lamps92
"Welcome light"93
Wheel/tire combination, refer 
to Correct wheels and 
tires210
Wheelbase, refer to 
Dimensions239
Wheels, new209
Wheels and tires206
Width, refer to 
Dimensions239
Windows37
– convenient operation30
– convenient operation with 
convenient access36
– opening, closing37
– pinch protection system37
– safety switch38
Windows, indicator on Control 
Display16
Windshield
– cleaning64Windshield wash64
– filling capacity, reservoir241
– nozzles65
– reservoir for washer fluid65
– washer fluid65
Windshield wiper blades, 
changing223
Windshield wipers, refer to 
Wiper system64
Winter tires210
– setting speed limit79
– storage210
Wiper blade replacement223
Wiper system64
"With highways" in 
navigation137
Word-matching principle for 
navigation138
Work in the engine 
compartment
218
Wrench/screwdriver, refer to 
Onboard tool kit223
X
Xenon lamps
– replacing bulb224
Y
Your individual vehicle
– settings, refer to MDrive48
– settings, refer to Personal 
Profile28