
Driving
56
Driving
Ignition lock
Insert the remote control into the 
ignition lock
Insert the remote control all the way into the 
ignition lock.
>Radio readiness is switched on.
Individual electrical consumers can operate.
Convenient access*
If the car is equipped with convenient access, 
only insert the remote control into the ignition 
lock under special circumstances, refer to 
page36.
Removing the remote control from the 
ignition lock
Do not forcibly pull the remote control out 
of the ignition lock as this may cause 
damage.<
Before removing the remote control, push it all 
the way in to release the locking mechanism.
>The ignition is switched off if it was on.
Automatic transmission
You cannot take out the remote control unless 
the selector lever is in the P position: interlock.
Start/stop button
Pressing the start/stop button switches radio 
readiness or the ignition on or off.
The engine is started when you press the 
start/stop button and depress the clutch if 
the car has manual transmission, or the brake if 
the car has automatic transmission.<
Radio readiness
Individual electrical consumers can operate. 
The time and the outside temperature are dis-
played in the instrument cluster.
Radio readiness is switched off automatically:
>When the remote control is removed from 
the ignition lock
>In cars with convenient access
*, by touch-
ing the surface above the door lock, refer to 
Locking on page37
Ignition on
All electrical consumers can operate. The 
odometer and trip odometer are displayed in 
the instrument cluster.
When the engine is off, please switch off 
the ignition and any unnecessary electri-
cal consumers in order to preserve the bat-
tery.<
Radio readiness and ignition off
All indicator and warning lamps as well as dis-
plays in the instrument cluster go out. 

Driving
64 Press the lever beyond the resistance point, 
arrow 1, until the desired speed is reached.
The vehicle accelerates without pressure on 
the accelerator pedal. The system stores and 
maintains the speed.
Decreasing speed
Repeatedly pull the lever to the resistance point 
or beyond, arrow 2, until the desired speed is 
displayed.
>Each time the lever is pulled to the resis-
tance point, the desired speed is decreased 
by approx. 1 mph or 1 km/h.
>Each time the lever is pulled beyond the 
resistance point, the desired speed is 
reduced by up to 5 mph or 10 km/h until the 
minimum speed of 20 mph or 30 km/h is 
achieved.
The system stores and maintains the speed.
Deactivating cruise control
Tap the lever upwards or downwards, arrow3. 
The displays on the speedometer disappear.
In addition, the system is automatically deacti-
vated:
>When you brake the vehicle
>When you switch gears very slowly or shift 
to idle in cars with manual transmission
>When you select the automatic transmis-
sion's neutral position N
>When you activate DTC or deactivate DSC
>When DSC or ABS is intervening
Cruise control is not deactivated by depressing 
the accelerator pedal. Once the accelerator 
pedal is released, the stored speed is achieved 
again and maintained.
Warning lamp
The warning lamp comes on when 
cruise control has been deactivated 
by applying the parking brake or as a 
result of DSC intervention. A message appears 
on the Control Display.
Resuming a speed stored beforehand
Press the button, arrow4. The last stored 
speed is resumed and maintained.
In the following instances, the stored speed is 
deleted and can no longer be resumed:
>When driving stability control systems are 
intervening
>In cars  with ma nua l trans mis sio n: when you 
shift gears very slowly or shift to idle posi-
tion
>In cars with automatic transmission: when 
you engage selector lever position N
>When the ignition is switched off
Displays in the instrument cluster
1Stored speed
2Selected speed is displayed briefly
If --- mph or --- km/h temporarily appears 
in the instrument cluster display, it is pos-
sible that the system prerequisites for operation 
are currently not met. 
Calling up Check Control messages, refer to 
page82.<
Malfunction
The warning lamp comes on when 
the system has failed. A message 
appears on the Control Display. You 
can find more information starting on page81. 
Active cruise control*
The concept
With active cruise control, you can select a 
desired speed which is not only automatically  

Controls
 67Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Use good judgment to select the appro-
priate following distance given road con-
ditions, traffic, applicable laws and driving rec-
ommendations for safe following distance. 
Otherwise, an accident risk could result.<
Deactivating cruise control
Press the lever upward or downward, arrow3. 
The displays on the speedometer disappear.
In addition, the system is automatically deacti-
vated:
>When you brake the vehicle
>When the speed is reduced to below 
20 mph or 30 km/h due to a traffic situation
>When you switch gears very slowly or shift 
to idle in cars with manual transmission
>When you select the automatic transmis-
sion's neutral position N
>When you activate the Dynamic Traction 
Control DTC
>When you deactivate the Dynamic Stability 
Control DSC
>When DSC or ABS is intervening
>When the system does not recognize any 
objects for a longer period of time, e.g. on 
infrequently traveled roads without a shoul-
der or guard rails, or if the radar sensor is 
covered with dirt, refer to page68
>When you apply the parking brake
When the system is deactivated, you 
must brake the vehicle yourself and/or 
maneuver as necessary, otherwise there is a 
risk of accident.<
Warning lamp
The warning lamp comes on when 
active cruise control has been auto-
matically deactivated due to a driving 
speed below 20 mph or 30 km/h, an application 
of the parking brake or a DSC intervention. A 
message appears on the Control Display.
Resuming stored desired speed and 
distance
Briefly press the button, arrow 4. 
The stored speed and distance are regained 
and maintained.
In the following instances, the stored speed is 
deleted and can no longer be resumed:
>When driving stability control systems are 
intervening
>In cars with manual transmission: when you 
shift gears very slowly or shift to idle posi-
tion
>In cars with automatic transmission: when 
you engage selector lever position N
>When the ignition is switched off
Displays in the instrument cluster
1Stored desired speed
2Shows yellow: vehicle detected ahead
Flashes in red: system cannot maintain dis-
tance; driver must brake the vehicle
Flashes in yellow: driving stability control 
systems are intervening; cruise control is 
deactivated
3Selected distance to vehicle ahead
The indicator lights up as soon as the sys-
tem is activated. 

Driving
68 4Selected desired speed is temporarily dis-
played
If --- mph or --- km/h temporarily appears 
in the instrument cluster display, it is pos-
sible that the system prerequisites for operation 
are currently not met. Calling up Check Control 
messages, refer to page82.<
Warning lamps
The indicator2 flashes in red; a 
signal sounds. 
The system indicates that you 
must brake and/or maneuver the 
vehicle yourself. Active cruise con-
trol cannot automatically restore the distance to 
the vehicle ahead. 
This indicator does not release you from your 
responsibility to adapt your desired speed and 
driving style to prevailing driving conditions.
The indicator 2 flashes in yellow. 
The prerequisites for operating 
active cruise control are not met, 
e.g. as a result of ABS or DSC 
interventions. Active cruise control 
is deactivated. You can reactivate the system, if 
desired, by tapping or pulling the lever when road and traffic conditions permit. It is not pos-
sible to resume a stored speed.
Radar sensor
The sensor's ability to detect vehicles ahead 
may be restricted as a result of heavy rain, dirt, 
snow or ice. If necessary, clean the radar sensor 
located in the front bumper, see arrow. Be sure 
to use particular care when removing any layers 
of snow or ice from the sensor.
When the radar sensor is not properly posi-
tioned, active cruise control cannot be activated 
at all.
Malfunction
The warning lamp comes on when 
the system has failed. A message 
appears on the Control Display. You 
can find more information starting on page81. 
System limitations
Always remember that the range and abil-
ity of the system does have physical limi-
tations. It will not apply the brakes or decelerate 
your vehicle when there is a slow-moving vehi-
cle, stopped vehicle or stationary object ahead 
of you, as for example, at a traffic light or a 
parked vehicle. Also, the system does not react to oncoming traffic, pedestrians or other types 
of potential traffic such as a rider on horseback. 
It is also possible that the system may not 
detect smaller moving objects such as motor-
cycles or bicycles. Be especially alert when 
encountering any of these situations as the sys-
tem will neither automatically brake, nor provide  

Controls
 69Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
a warning to you. Also, be aware that every 
decrease in the distance setting allows your 
vehicle to come closer to a vehicle in front of 
you and requires a heightened amount of alert-
ness.<
Active cruise control is not and must not 
be used as a collision avoidance/warning 
system.<
If while your vehicle is actively following a vehi-
cle in front of you and the vehicle ahead speeds 
up or the lane ahead becomes clear, then your 
vehicle will accelerate to the speed you have 
selected. Be aware that changing to a clear, 
unobstructed lane will also result in your vehicle 
accelerating.
Be certain to deactivate the system when 
you pull into an exit lane for a highway off-
ramp.<
Also, vehicles traveling in a staggered manner 
on a highway may cause a delay in the system's 
reaction to a vehicle in front of you or may cause 
the system to react to a vehicle actually in the 
lane next to you. Always be ready to take action 
or apply the brakes if necessary.
While active cruise control is capable of 
braking your vehicle automatically when 
you approach a slower vehicle ahead, it is 
important to be aware that the ability of the sys-
tem to apply the brakes is also limited, e.g. 
when you reduce your desired speed sharply. 
The system cannot stop your vehicle. It uses 
only a portion of braking system capacity and 
does not utilize the full capacity of the vehicle 
braking system. Therefore, the system cannot 
decrease your speed for large differences in 
speed between your vehicle and the vehicle 
ahead. Examples: when you approach a vehicle 
traveling at a much lower speed than your own 
speed such as approaching a toll booth or when 
a much slower vehicle cuts in front of you at 
close range.<
Active cruise control can only decelerate the 
vehicle to approx. 20 mph or 30 km/h.Swerving vehicles
When a vehicle moves from an adjacent lane 
into your lane, active cruise control will not rec-
ognize this vehicle until it is fully in your lane 
ahead of your vehicle.
When a vehicle ahead suddenly swerves 
into your lane, the system may not be able 
to maintain the selected distance automatically. 
This also applies to great differences in speed 
between you and vehicles ahead, e.g. when 
quickly approaching a truck. There is a risk of 
collision. Once the system has established that 
a vehicle is indeed in front of you, it will indicate 
that you must brake and/or maneuver the vehi-
cle yourself. Take action yourself, otherwise 
there is a risk of an accident.<
Behavior in curves
Because of the limited range of the system, it is 
possible that in curves or on the peaks and val-
leys of hilly roads, a vehicle ahead may be rec-
ognized late, or not at all. Therefore, it is up to 
the driver to select a speed that is prudent in 
view of the curves and terrain of the roadway. 

Controls
 71Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Everything under control
Odometer, outside 
temperature display, clock
1Knob in the instrument cluster
2Outside temperature display and clock
3Odometer and trip odometer
Knob in the instrument cluster
>To reset the trip odometer while the ignition 
is switched on
>To display the time, outside temperature 
and odometer briefly while the ignition is 
switched off
Units of measure
T o  s e l e c t  t h e  r e s p e c t i v e  u n i t s  o f  m e a s u r e ,  m i l e s  
or km for the odometer as well as 7 or 6 for 
the outside temperature, refer to page76.
The setting is stored for the remote control cur-
rently in use.
Time, outside temperature display
Setting the time, refer to page79.
Outside temperature warning
When the displayed temperature sinks to 
approx. +377/+36, a signal sounds and a 
warning lamp lights up. There is an increased 
risk of black ice.
Black ice can also form at temperatures 
above +377/+36. You should there-
fore drive carefully on bridges and shaded roads, for example, otherwise there is an 
increased risk of an accident.<
Odometer and trip odometer
Resetting trip odometer: 
With the ignition switched on, press button1 in 
the instrument cluster.
When the vehicle is parked
If you still want to view the time, outside tem-
perature and odometer reading briefly after the 
remote control has been taken out of the igni-
tion lock:
Press button 1 in the instrument cluster.
Tachometer
Never force the engine speed up into the red 
warning field, see arrow. In this range, the fuel 
supply is interrupted to protect the engine. 

Everything under control
72
Coolant temperature
A warning lamp will come on if the coolant, and 
therefore the engine, becomes too hot. In addi-
tion, a message will appear on the Control Dis-
play.
Check coolant level, refer to page225.
Energy Control*
Displays the current fuel consumption. This 
allows you to see whether your current driving 
style is conducive to fuel economy with mini-
mum exhaust emissions.
Engine oil temperature*
When the engine is at normal operating temper-
ature, the engine oil temperature is between 
approx. 2107/1006 and approx. 3007/
1506.
If the engine oil temperature is too high, a mes-
sage appears on the Control Display.
Fuel gauge
Fuel tank capacity: approx. 15.9 US gallons/
60 liters.
You can find information on refueling on 
page207.
If the tilt of the vehicle varies for a longer period, 
when you are driving in mountainous areas, for 
example, the indicator may fluctuate slightly.
Reserve
Once the fuel level has fallen to the reserve 
zone, a message briefly appears on the Control 
Display and the cruising range for the remaining 
amount of fuel is displayed on the computer. 
Under a cruising range of approx. 30 miles/
50 km, the message remains in the Control Dis-
play.
Refuel as soon as possible once your 
cruising range falls below 30 miles/
50 km, otherwise engine functions are not 
ensured and damage can occur.< 

Controls
 81Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
6.Press button 2.
The system stores the new date.
Via iDrive
iDrive, for operating principle refer to page16.
1.Open the start menu.
2.Press the controller to open the   menu.
3.Turn the controller until "Settings" is 
selected and press the controller.
4.Select "Date" and press the controller.
5.Select "Set date" and press the controller. 
The first date display setting is selected.
6.Turn the controller to make the adjustment.
7.Press the controller to apply the setting. 
The next setting is highlighted.
8.Make the remaining adjustments. After the 
last adjustment, the date is stored.
Setting the date format
1.Open the start menu.
2.Press the controller to open the   menu.
3.Turn the controller until "Settings" is 
selected and press the controller.
4.Turn the controller until "Time / Date" is 
selected and press the controller.
5.Select "Date format" and press the control-
ler.
6.Select the desired format and press the 
controller.
Check Control
The concept
The Check Control monitors vehicle functions 
and alerts you to any malfunctions in the sys-
tems monitored. Such a Check Control mes-
sage includes indicator and warning lamps in 
the instrument cluster and, in some circum-
stances, an acoustic signal as well as text mes-
sages at the bottom of the Control Display.
Indicator and warning lamps
Indicator and warning lamps can light up in a 
variety of combinations and colors.
 indicates that Check Control messages have 
been stored. You can view the Check Control 
messages whenever it is convenient for you.