
Adjustments
46 accident.
On the front passenger seat as well, do not 
incline the backrest too far to the rear while the 
vehicle is being driven, otherwise there is a dan-
ger in the event of an accident of sliding under 
the safety belt, eliminating the protection nor-
mally provided by the belt.<
Comply with the instructions on head restraint 
height on page47, and on damaged safety 
belts on page51.
Manual adjustment
Observe the adjustment instructions on 
page45 to ensure the best possible per-
sonal protection.<
Longitudinal direction
Pull lever 1 and slide the seat to the desired 
position. 
After releasing the lever, move the seat gently 
forward or back to make sure it engages prop-
erly.
Height
Pull lever 2 and apply your weight to the seat or 
lift it off, as necessary.
Backrest
Pull lever 3 and apply your weight to the back-
rest or lift it off, as necessary.
Tilt*
Pull the lever and apply your weight to the seat 
or lift it off, as necessary.
Thigh support*
Pull the lever and move the thigh support for-
ward or back.
Electrical adjustment
Observe the adjustment instructions on 
page45 to ensure the best possible per-
sonal protection.< 

Controls
 47Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
1Longitudinal direction
2Height
3Angle
4Backrest
5Convertible: head restraints
Coupe: the head restraints are adjusted manu-
ally, refer to Head restraints below.
Lumbar support*
You can also adjust the contour of the backrest 
to obtain additional support in the lumbar 
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a 
relaxed, upright sitting position.
>Increase or decrease curvature: press the 
switch at the front or rear, respectively.>Shift curvature up or down: press the switch 
at the top or bottom, respectively.
Backrest width*
You can change the width of the backrest to suit 
your individual preferences by adjusting the lat-
eral-support pads.
Press the front or rear end of the switch.
Backrest width decreases or increases accord-
ingly.
Longitudinal adjustment from outside/
behind*
To move the front seats forward or backward 
from outside or from one of the rear seats: with 
the door open, press the front end 1 or rear end 
2 of the switch.
Head restraints
A correctly adjusted head restraint reduces the 
risk of neck injury in the event of an accident.
Adjust the head restraint in such a way 
that its center is at approx. ear level. Oth-
erwise, there is an increased risk of injury in the 
event of an accident. Only remove a head 
restraint if no one will be sitting on the seat in 
question. Reinstall the head restraint before  

Adjustments
48 transporting anyone on that seat. Otherwise, 
the passenger will be without protection from 
the head restraint.<
Front seats
Coupe: height adjustment
>To raise: pull up.
>To lower: press the button, arrow1, and 
slide the head restraint down.
Coupe: removing
1.Pull up as far as it will go.
2.Press the button, arrow1, and pull the head 
restraint all the way out.
Convertible: height adjustment
>To raise: press the button upward.
>To lower: press the button downward.
Coupe: rear seats
Height adjustment
>To raise: pull up.
>To lower: press the button, arrow1, and 
slide the head restraint down.
Removing
1.Pull up as far as it will go.
2.Press the button, arrow 1, tilt the rear seat 
backrest slightly forward and pull the head 
restraint all the way out.
O nly remove the head restraints if no pas-
sengers will be sitting in the rear. Reinstall 
head restraints before transporting passengers 
in the rear.<
Entering the rear seats
Coupe: seat with manual longitudinal 
adjustment
Convenient entry
The convenient entry feature includes a mem-
ory function for the longitudinal adjustment and 
backrest angle. 

Adjustments
54 1.Fold the lever down.
2.Move the steering wheel to the preferred 
height and angle to suit your seated posi-
tion.
3.Swing the lever back up.
Do not use force to swing the lever 
back up, otherwise the mechanism 
will be damaged.<
Programmable buttons on the steering 
wheel
You can program the buttons to suit your per-
sonal preferences:
These settings are stored for the remote con-
trol currently in use.
iDrive, for operating principle refer to page16.
1.Press the   button.
This opens the start menu.
2.Press the controller to open the   menu.3.Select "Settings" and press the controller.
4.Select "Steering wheel buttons" and press 
the controller.
A list showing various functions is dis-
played:
>"Navigation voice instructions" 
Voice messages from the navigation 
system
*
>"Air recirculation on / off" 
Permanent shut-off of outside air, refer 
to AUC Automatic recirculated-air con-
trol on page106
>"Mute on / off" 
To mute the audio sources
>"Monitor on / off" 
To switch the Control Display on/off
>"Telephone list"
*
To show/hide the phone book or last dis-
played list of stored phone numbers
>"Next entertainment source"
To change the audio source
5.Select the desired function and press the 
controller. 

Reference 259
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Heating
– mirrors53
– rear window107
– residual heat107
– seats49
Heating and ventilation, refer 
to Climate104
Heating while at a standstill, 
refer to Using residual 
heat107
Heavy loads, refer to Stowing 
cargo127
Height, refer to 
Dimensions245
Height adjustment
– seats46
– steering wheel53
High beams102
– headlamp flasher102
– indicator lamp13
High Definition Radio167
High water, refer to Driving 
through water126
Highways, refer to Route 
criteria145
Hill Descent Control HDC90
Hills126
Holders for cups115
Home address144
"Home address" in 
navigation145
Homepage BMW4
Hood224
Hooks for shopping bags118
Horn10,11
Hotel function, refer to 
Locking or unlocking 
separately34
Hot exhaust system125
"Hour memo"82
"House number" in 
destination entry137
Hydraulic brake assist, refer to 
Dynamic Brake Control 
DBC89
Hydroplaning125I
IBOC, refer to High Definition 
Radio167
Ice warning, refer to Outside 
temperature
warning74
ID3 tag, refer to Information 
about the track175
Identification marks
– Run-Flat Tires222
– tire coding220
iDrive16
– adjusting brightness86
– assistance window20
– automatic climate 
control105
– changing language86
– changing units of measure 
and display format78
– confirming selection or 
entry19
– controls16
– displays, menus17
– menu guidance17
– operating principle16
– overview16
– selecting a menu item19
– setting the date and time81
– start menu17
– status information20
– switching menu pages19
– symbols18
iDrive operating principle16
Ignition59
– switched off59
– switched on59
Ignition key, refer to Remote 
control with integrated 
key28
Ignition key position 1, refer to 
Radio readiness59
Ignition key position 2, refer to 
Ignition on59
Ignition lock59
i menu18
Imprint2Indicator and warning 
lamps13
– Tire Pressure Monitor 
TPM95
Individual air distribution105
Inflation pressure, refer to Tire 
inflation pressure212
Inflation pressure monitoring, 
refer to Tire Pressure 
Monitor TPM93
Information
– on another location140
– on country140
– on current position140
– on destination location140
Information menu, refer to 
i menu18
"Information on 
destination"142
"Info sources"80
Initializing
– active steering96
– after power failure235
– compass, refer to 
Calibrating112
– Flat Tire Monitor FTM92
– glass roof40
"Input map"139
Installation location
– CD changer177
– navigation DVD drive132
– telephone114
Instructions for navigation 
system, refer to Voice 
instructions150
Instrument cluster12
Instrument lighting103
Instrument panel, refer to 
Cockpit10
Integrated key28
Integrated universal remote 
control110
Interesting destination for 
navigation140
"Interim time"86
Interior lamps103
– remote control31
Interior motion sensor36 

Everything from A - Z
264 Route145
– arrow display148
– changing151
– display148
– displaying streets and 
towns/cities150
– displaying town150
– list150
– map display149
– selecting145
– selecting criteria145
RSC Runflat System 
Component, refer to Run-
Flat Tires222
Rubber parts, refer to Caring 
for your vehicle brochure
Runflat System Component 
RSC, refer to Run-Flat 
Tires222
Run-Flat Tires222
– continuing driving with a 
damaged tire93
– flat tire93
– Flat Tire Monitor93
– new tires222
– replacing222
– tire inflation pressure212
– winter tires223
S
Safety-belt height 
adjustment51
Safety belts51
– belt hand-over52
– damage51
– indicator/warning lamp51
– reminder51
– sitting safely45
Safety belts, care, refer to 
Caring for your vehicle 
brochureSafety systems
– airbags97
– Antilock Brake System 
ABS89
– brake system89
– driving stability control 
systems89
– Dynamic Stability Control 
DSC89
– rollover protection system, 
convertible98
– safety belts51
Safety tires, refer to Run-Flat 
Tires222
"SAT"160,170
Satellite radio170
– displaying additional 
information171
– enabling170
– selecting channel171
– storing channel171
Saving fuel124
"Scan"
– sampling radio stations165
– sampling tracks on CD175
Scan
– CD changer175
– CD player175
– radio165
"Scan all" for audio mode175
"Scan directory" for audio 
mode175
Screen, refer to iDrive 
controls16
Screw thread for tow 
fitting239
SDARS, refer to Satellite 
radio170
Seat adjustment
– electric46
– mechanical46
Seat and mirror memory50
Seat belt reminder, refer to 
'Fasten safety belts' 
reminder51
Seat heating49Seats45
– adjusting electrically46
– adjusting the seats46
– heating49
– memory, refer to Seat and 
mirror memory50
– saving a setting, refer to Seat 
and mirror memory50
– sitting safely45
Securing cargo119,121
Securing the vehicle
– from inside32
– from outside29
"Select as 
destination"141,205
"Select current speed"86
Selecting a country for 
navigation135
Selecting an audio source160
Selecting distance for active 
cruise control69
Selecting menu items19
Selecting new scale for 
navigation149
Selector lever
– automatic transmission with 
Steptronic62
Selector lever lock, refer to 
Changing selector lever 
positions, shiftlock62
Selector lever positions
– automatic transmission with 
Steptronic62
Service, refer to Roadside 
Assistance236
Service car, refer to Roadside 
Assistance236
Service data in the remote 
control229
"Service Info"80,203,226
Service Interval Display, refer 
to Condition Based Service 
CBS229
"Service Request"196,203
Service requirement display, 
refer to Condition Based 
Service CBS229
"Service 
requirements"80,203,226