
Cockpit
12
Instrument cluster
1Speedometer
2Indicator lamps for turn signals
3Indicator and warning lamps13
4Displays for active cruise control
*67
5Tachometer74
6Engine oil temperature75
7Display for
>Clock74
>Outside temperature74
>Indicator and warning lamps838Display for
>Position of automatic transmission
*61
>Computer75
>Date of next scheduled service, and 
remaining distance to be driven79
>Odometer and trip odometer74
>Checking engine oil level
*225
>Settings and information78
> There is a Check Control 
message83
9Fuel gauge75
10Resetting the trip odometer74 

Controls
 75Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Coolant temperature
A warning lamp will come on if the coolant, and 
therefore the engine, becomes too hot. In addi-
tion, a message will appear on the Control Dis-
play.
Check coolant level, refer to page228.
Engine oil temperature*
When the engine is at normal operating temper-
ature, the engine oil temperature is between 
approx. 2107/1006 and approx. 3007/
1506.
If the engine oil temperature is too high, a mes-
sage appears on the Control Display.
Fuel gauge
Fuel tank capacity: approx. 15.9 US gallons/
60 liters.
You can find information on refueling on 
page210.
If the tilt of the vehicle varies for a longer period, 
when you are driving in mountainous areas, for 
example, the indicator may fluctuate slightly.
Reserve
Once the fuel level has fallen to the reserve 
zone, a message briefly appears on the Control 
Display and the cruising range for the remaining 
amount of fuel is displayed on the computer. 
Under a cruising range of approx. 30 miles/
50 km, the message remains in the Control Dis-
play.
Refuel as soon as possible once your 
cruising range falls below 30 miles/
50 km, otherwise engine functions are not 
ensured and damage can occur.<
Computer
Displays in the instrument cluster
Calling up information
Press the button in the turn indicator lever.
The following items of information are dis-
played in the order listed:
>Cruising range
>Average speed
>Average fuel consumption
>Current fuel consumption
*
>No information
To set the corresponding units of measure, 
refer to Units of measure on page78.
Cruising range
Displays the estimated cruising range available 
with the remaining fuel. The range is calculated 
on the basis of the way the car has been driven 
over the last 18 miles/30 km and the amount of 
fuel currently in the tank. 

Everything under control
78
Settings and information
Operating principle
1Button for:
>Selecting display
>Setting values
2Button for:
>Confirming selected display or set val-
ues
>Calling up computer information753When the lights are on: instrument lighting 
brightness103
4Calling up Check Control83
5Checking engine oil level225
6Setting the time81
7Setting the date83
8Viewing service requirement display79
Exiting displays
The outside-temperature reading and the time 
reappear when you press button2 or if you 
make no entries within approx. 15 seconds. If 
required, complete the current setting first.
Units of measure
You can set units of measure.
iDrive, for operating principle refer to page16.
1.Open the start menu.
2.Press the controller to open the   menu.
3.Select "Settings" and press the controller.4.Select "Language / Units" and press the 
controller.
5.If necessary, move the highlight marker to 
the uppermost field. Turn the controller 
until "Units" is selected and press the con-
troller. 

Mobility
 225Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Important parts of the engine compartment
1Expansion tank for coolant, refer to 
page227
2Washer fluid filler neck for headlamp clean-
ing system and window washer system, 
refer to page653Jump-starting connection, refer to 
page237
4Filler neck for engine oil, refer to Adding 
engine oil
Engine oil
The engine oil consumption is dependent on 
driving style and driving conditions.
Checking oil level
Your car is equipped with an electronic oil-level 
monitor.
For a precise measurement and display of the 
oil level, it is necessary that the engine be at 
operating temperature, i.e. after uninterrupted 
driving for at least approx. 6.5 miles/10 km. You 
can have the oil level displayed while you are 
driving, or while the vehicle is at a standstill on a 
level surface and the engine is running.
Display in the instrument cluster
1.Push button 1 in the turn indicator lever up 
or down repeatedly until the appropriate 
symbol is shown in the display, accompa-
nied by the word "OIL".
2.Press button 2 in the turn indicator lever. 
The oil level is checked and the reading dis-
played. 

Under the hood
226
Possible displays
1Oil level OK
2Oil level is being checked.
This can take about 3 minutes if the car is at 
a standstill on a level surface, or about 
5 minutes while the car is on the move.
3Oil level down to minimum:
Add engine oil as soon as possible, but no 
more than 1 US quart/1 liter, refer also to 
Adding engine oil on page227.
4Oil level is too high.
Too much oil will harm the engine. 
Have the vehicle checked without 
delay.<
5The oil level sensor is defective.
Do not add engine oil. You can continue 
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer 
to page79. Have the system checked as 
soon as possible.
Display via iDrive
iDrive, for operating principle refer to page16.
1.Press the   button.
This opens the start menu.
2.Press the controller to open the   menu.3.Select "Info sources" and press the control-
ler.
4.Select "Service Info" and press the control-
ler.
5.If necessary, move the highlight marker to 
the uppermost field. Turn the controller 
until "Service requirements" is selected and 
press the controller.
6.If necessary, move the highlight marker to 
the second field from the top. Turn the con-
troller until "Engine oil level" is selected and 
press the controller. The oil level is dis-
played.
Possible messages
>"Engine oil level O.K."
>"No measurement available: Updating 
engine oil level measurement..."
The engine oil level is measured. This can 
take about 3 minutes if the car is at a stand-
still on a level surface and the engine is run-
ning, and about 5 minutes while the car is on 
the move.
>"Oil level at the minimum! Refill with 1 quart 
of engine oil."
Add engine oil as soon as possible, but no  

Mobility
 227Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
more than 1 US quart/1 liter, refer also to 
Adding engine oil below.
>"Engine oil level too high"
Too much oil will harm the engine. 
Have the vehicle checked without 
delay.<
>"Please observe recalculated service inter-
val for engine oil"
Do not add engine oil. You can continue 
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer 
to page79. Have the system checked as 
soon as possible.
Adding engine oil
Do not add 1 US quart/1 liter of engine oil until a 
corresponding message is shown on the Con-
trol Display.
Add oil within the next 125 miles/200 km, 
otherwise the engine could be dam-
aged.<
Keep oils, greases, etc. out of the reach of 
children and comply with the relevant 
warnings on the containers. Otherwise, health 
hazards may result.<
Oil change
Have oil changed only at your BMW center or at 
a workshop that works according to BMW 
repair procedures with correspondingly trained 
personnel.
Specified engine oils
The quality of the engine oil selected has critical 
significance for the operation and service life of 
an engine. BMW continuously approves spe-cific oils after confirming their suitability for use 
in its vehicles with extensive testing.
Do not use oil additives as these may 
cause engine damage.<
Only use approved BMW High Performance 
Synthetic Oil.
If BMW High Performance Synthetic Oil is not 
available, you can add small quantities of other 
synthetic oils in between oil changes. Only use 
oils with the API SM specification or higher.
Your BMW center will be glad to answer 
any questions regarding BMW High Per-
formance Synthetic Oil or approved synthetic 
oils.<
You can also call BMW of North America at 
1-800-831-1117 or visit the website 
www.bmwusa.com to obtain this information.
Viscosity ratings
Viscosity is a measure of an oil's flow rating and 
is categorized in SAE classes.
Selecting the appropriate SAE class depends 
on the regional climatic conditions in which you 
normally drive your BMW.
Approved oils belong to the 5W-40 and 
5W-30 classes.<
These oils can be used for driving at all outside 
temperatures.
Coolant
Do not add coolant to the cooling system 
when the engine is hot. Escaping coolant 
can cause burns.<
Coolant consists of half water and half additive. 
Not all commercially available additives are suit-
able for your BMW. Ask your BMW center for 
suitable additives.
Only use suitable additives, otherwise 
engine damage may result. Because 
additives are harmful to your health, it is impor-
tant to follow the instructions on the contain-
ers.< 

Mobility
 229Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Maintenance
BMW Maintenance System
The BMW Maintenance System supports the 
preservation of the traffic and operating safety 
of your BMW. The objective is to optimize 
efforts with respect to minimal vehicle mainte-
nance costs.
If and when you come to sell your BMW, a com-
prehensive record of servicing will prove a sig-
nificant benefit.
CBS Condition Based Service
Sensors and special algorithms take the differ-
ent driving conditions of your BMW into 
account. Condition Based Service uses this to 
determine the current and future service 
requirements. By letting you define a service 
and maintenance regimen that reflects your 
own individual requirements, the system builds 
the basis for trouble-free driving.
On the Control Display, you can have the 
remaining times or distances for selected main-
tenance tasks and any legally prescribed dates 
displayed, refer to page79:
>Engine oil
>Brake pads: separately for front and rear
>Brake fluid
>Vehicle check
>Legally mandated inspections depending 
on local regulations
Service data in the remote control
Your vehicle continuously stores service-
requirement information in the remote control 
while you are driving. Your BMW Service Advi-
sor can read out this data from the remote con-
trol unit, and propose an optimized mainte-
nance approach. Whenever you take your car in 
for servicing you should therefore hand your 
BMW Service Advisor the remote control unit 
that you last used.
Make sure that the date is always set cor-
rectly, refer to page82; otherwise the 
effectiveness of Condition Based Service CBS 
is not assured.<
Service and Warranty Information 
Booklet for US models and Warranty 
and Service Guide Booklet for 
Canadian models
Please consult your Service and Warranty Infor-
mation Booklet for US models and Warranty 
and Service Guide Booklet for Canadian models 
for additional information on service require-
ments.
BMW recommends that you have service 
and repair operations performed at your 
BMW center. 
Take the time to ensure that these service pro-
cedures are confirmed by entries in your vehi-
cle's Service and Warranty Information Booklet 
for US models and Warranty and Service Guide 
Booklet for Canadian models. These entries 
verify that your vehicle has received the speci-
fied regular maintenance.< 

Reference 257
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Driving tips, refer to Driving 
notes124
Dry air, refer to Cooling 
function107
DSC Dynamic Stability 
Control89
DTC Dynamic Traction 
Control90
– indicator/warning lamp90
DVD for navigation132
Dynamic Brake Control 
DBC89
"Dynamic route" in 
navigation145
Dynamic Stability Control 
DSC
– indicator/warning lamp90
Dynamic Traction Control 
DTC
– indicator/warning lamp90
E
EBV Electronic brake-force 
distribution89
Eject button, refer to Buttons 
on the CD player160
Electrical malfunction
– door lock32
– driver's door32
– fuel filler door210
– glass roof40
– luggage compartment lid33
Electric seat adjustment46
Electric steering wheel lock
– with convenient access37
Electronic oil level check225
Emergency actuation, 
automatic transmission, 
refer to Overriding selector 
lever lock63
Emergency operation
– fuel filler door, manual 
release210
Emergency operation, refer to 
Closing manually
– glass roof40Emergency operation, refer to 
Manual operation
– door lock32
Emergency release
– luggage compartment lid 
from inside34
Emergency Request236
Emergency services, refer to 
Roadside Assistance236
"Enabled services"206
"Enable services"207
"End call"193
Energy, saving
– saving fuel124
Engine
– breaking in124
– data244
– overheated, refer to Coolant 
temperature75
– speed244
– starting60
– starting, convenient 
access36
– switching off60
Engine compartment225
Engine coolant, refer to 
Coolant227
Engine oil
– adding227
– BMW Maintenance 
System229
– capacity247
– checking level225
– intervals between changes, 
refer to Service 
requirements79
"Engine oil level"226
Engine output, refer to Engine 
data244
Engine speed, refer to Engine 
data244
Engine starting, refer to 
Starting the engine60
"Enter address"135
Entering a destination135
Entering a destination 
country135
Entering a house number or 
intersection137Entering an intersection136
Entering a street136
"Entertainment"160
Entry lamps, refer to Interior 
lamps103
"Equalizer", refer to Tone 
control163
Equalizer, refer to Tone 
control162
Error messages, refer to 
Check Control83
"ESN"170
ESP Electronic Stability 
Program, refer to DSC 
Dynamic Stability 
Control89
Event data recorders230
Exhaust system, refer to Hot 
exhaust system125
Exterior mirrors52
– adjusting52
– automatic dimming 
feature53
– automatic heating53
– folding in and out52
External audio device114
External audio device, refer to 
AUX-In port179
Eyes
– for tow-starting and towing 
away239
– for tying down loads128
F
Fader, tone control161
Failure messages, refer to 
Check Control83
Failure of an electrical 
consumer235
False alarm
– avoiding unintentional 
alarm36
– switching off an alarm35
Fastening safety belts, refer to 
Safety belts51
Fastest route for 
navigation145