2008 BMW 3 SERIES brake pads replacement

The BMW Maintenance Program
The BMW Maintenance Program is a benefit
designed to help reduce the cost of ownership.
This program has been devised with the follow-
ing objectives: to maximize vehicle safety, reli-
ability, and resale value by minimizing
breakdowns resulting from wear, and minimizing
cost and inconvenience by computing mainte-
nance intervals based upon the specific manner
in which each individual vehicle is driven.
2008 3 Series vehicles purchased from any
authorized BMW center in the United States or
Puerto Rico are covered by The BMW Mainte-
nance Program for 48 months or 50,000 miles,
whichever occurs first. Coverage begins on the
date of first retail sale or the date the vehicle is
first placed into service as a sales demonstrator,
service loaner (SLP) or company vehicle, which-
ever is earlier.
Any authorized BMW center in the United
States or Puerto Rico will perform the sched-
uled maintenance services on your vehicle at no
expense to you.
Coverage
The BMW Maintenance Program covers all fac-
tory recommended maintenance, as determined
by the Condition Based Service (CBS) system.
Additional items that need replacement due to
normal wear and tear, and that are not covered
by the original New Vehicle Limited Warranty -
such as brake pads, brake rotors, and wiper
blades inserts - are included, provided wear and
tear exceeds BMW wear limits. Any adjustments
required due to normal operating conditions are
also included. See pages 7-8 of this booklet for
additional information.
Exclusions from coverage include the following:
 Items reimbursable under your New Vehicle
Limited Warranty
 Gasoline
 Windshield washer additive (except when in
conjunction with scheduled maintenance)
 Tires, wheel alignment, tire balance and
rotation 
Wear and tear of soft trim items, such as:
seats, carpets, moldings, headliner, door pan-
els and all chrome trim
 Damage detected when performing the rust
perforation inspection
 Damage which results from negligence,
improper operation of the vehicle, wear and
tear or deterioration due to driving habits or
conditions, improper repair, environmental
influences, flood, accident or fire damage,
road salt corrosion, alteration, installation of
non-genuine BMW accessories, or use of
improper, poor quality or contaminated fuel
 Altered or unreadable Vehicle Identification
Number (VIN) or odometer irregularities or
vehicles where the true mileage cannot be
determined
 Maintenance or repair after the vehicle is
deemed a total loss
 Maintenance or repairs performed by other
than an Authorized BMW center within the
United States or Puerto Rico
 Vehicles used in competitive events
 Oil changes performed outside the recom-
mended maintenance intervals as indicated
by the Service Interval Display
Maintenance Upgrade Option
Please contact your authorized BMW center for
information and availability on the optional Main-
tenance Program Upgrade for coverage up to
6 years and 100,000 miles.
Intervals
Time intervals should be followed using the
maintenance interval as indicated by the BMW
Service Interval Display.
Maintenance intervals on motor vehicles have
conventionally been specified based upon accu-
mulated mileage. However, driving conditions
have a major influence on routine maintenance
requirements; distance traveled is only one of
the significant factors. A vehicle driven for
50,000 miles of short trips in the city with
numerous cold starts, prolonged periods of
idling, stop-and-go driving, and high engine
2

The engine coolant has a lifetime rating and
does not need to be changed except for sys-
tem repairs.
For your convenience, you may also wish to have
your BMW center perform any necessary opera-
tions to fulfill any state inspection requirements in
your area concurrent with the maintenance ele-
ments specified above during other repairs.
Should you request more frequent mainte-
nance service, the cost of these services will
not be covered by the Maintenance Program.
BMW has applied the most modern technological
advances not only to the design and production of
your vehicle, but also to computing of the opti-
mum maintenance interval for your type of opera-
tions and driving style. Your BMW center has
made a substantial investment in unique BMW
special service tools to enable BMW factory
trained service technicians to perform quality
repairs on your BMW in minimal time. Your service
technician looks forward to serving your every ser-
vice need and to help maximize your satisfaction
with your BMW, its longevity, and resale value.
Quality Certification I
For a detailed list of items inspected, refer to the
Quality Certification I form provided to the
Owner at time of delivery. A copy of the form is
on file at the selling BMW center.
Maintenance Summary
The Condition Based Service (CBS) system will
determine the requirement for performance of
the maintenance services described on this and
the following page. These services may be
required either individually or in conjunction with
other maintenance services.
Standard operations
Maintenance work:
 Brief diagnostic test
 Verify Check Control messages.
 Check indicator and warning lights.
 Reset CBS display.
 Inspect tires, adjust tire pressures and reset
Tire Pressure Monitor.
Engine oil
Maintenance work:
 Change the engine oil and oil filter. We rec-
ommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
 After every 3rd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
 Parking brake: Check function and
pre-burnish.
Microfilter (not shown in CBS)
Maintenance work:
 Replace ventilation microfilter.
Front brake
Maintenance work:
 Replace brake pads, clean brake pad contact
points in calipers.
 Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Rear brake
Maintenance work:
 Replace brake pads, clean brake pad contact
points in calipers.
 Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
 Parking brake: Check condition, brake lining
thickness and function, if necessary replace
at extra charge.*
*Unless covered by Maintenance Program
7

New Vehicle Limited Warranty —
2008 Models (Valid Only in the
U.S.A. and Puerto Rico)
Warrantor
BMW of North America, LLC (BMW NA) war-
rants 2008 U.S. specification vehicles distrib-
uted by BMW NA or sold through the BMW NA
European Delivery Program against defects in
materials or workmanship to the first retail pur-
chaser, and each subsequent purchaser.
Warranty Period
The warranty period is 48 months or
50,000 miles, whichever occurs first.
Warranty Begins
Coverage begins on the date of first retail sale
or the date the vehicle is first placed into service
as a sales demonstrator, service loaner (SLP) or
company vehicle, whichever is earlier.
Warranty Coverage
To obtain service under this warranty, the vehi-
cle must be brought, upon discovery of a defect
in material or workmanship, to the workshop of
any authorized BMW center in the United States
or Puerto Rico, during normal business hours.
The BMW center will, without charge for parts
or labor, either repair or replace the defective
part(s) using new or authorized remanufactured
parts. The decision to repair or replace said
part(s) is solely the prerogative of BMW NA.
Parts for which replacements are made become
the property of BMW NA.
In all cases, a reasonable time must be allowed
for warranty repairs to be completed after the
vehicle is received by the BMW center.
Safety Belt Warranty - Kansas
Safety belts are covered under the BMW New
Vehicle Limited Warranty for defects in material
or workmanship for a period of 10 years, unlim-
ited mileage from the date of purchase. In order
to be eligible for this coverage, the vehicle must
be a new car retailed in the State of Kansas and
the repair performed by an authorized BMW
center in Kansas.
Other Items
Wheel alignment, balancing and wiper blade
inserts are covered up to 2,000 miles.
Items which are subject to wear and tear or
deterioration due to driving habits or condi-
tions, such as brake pads/linings, brake
discs, clutch disc, pressure plate, filters,
upholstery, trim and chrome items, paint fin-
ish, drive belts, glass, and similar items, are
specifically limited to defects in material or
workmanship.
This warranty does not apply to the
following:
Damage which results from negligence,
improper operation of the vehicle, improper
repair, lack of or improper maintenance, environ-
mental influences, flood, accident or fire dam-
age, road salt corrosion, or use of improper or
contaminated fuel.
Damage to the engine, transmission or any
related component caused by improper shifting
of the transmission.
Maintenance services and parts when replaced
during maintenance such as spark plugs, lubri-
cants, fluids, engine tuneup parts, replacement
of filters, coolant, and refrigerant.
Failure to maintain the vehicle properly in accor-
dance with the instructions in the Owners Man-
ual or the Service section of this Statement, that
results in the failure of any part of the vehicle.
32