2008 AUDI TT ignition

Media drives17
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Disconnecting the iPod connector
– Release the connector by pressing both knobs

page 16, fig. 9.
– Carefully pull the connector out of the iPod .
When it is connected, the iPod can be put away in the storage bay

page 15, fig. 5.
The iPod battery is charged via the adapter cable when the iPod is
connected to the Audi music interface and the ignition is switched
on.
The following iPods can be connected to the iPod adapter cable:
•iPod Mini (versions 1.3.0, 1.4.0 and 1.4.1)
•iPod nano 1G - First Generation (versions 1.1, 1.1.1 and 1.3)
•iPod 5G - Fifth Generation Video (version 1.1.2)
•iPod 4G - Fourth Generation (version 3.1.1)
Other versions cannot be used with the iPod adapter cable. You can
connect these devices as portable players using the optional
adapter cable with 3.5 mm jack plug*
page 18.
Any problems with the iPod will also affect the operation of the MMI.
In this case, please reset your iPod (see operating instructions)
The following iPod control functions are not supported by the MMI:
•Star rating for music tracks
•Jump to a specific place in a track
•Add tracks to the “on-the-go” playlist
•Display the “compilations” folder. Similarly, tracks marked “part
of a compilation” are not included in the artist list if the compilation
function was activated in the iPod.
Note
•For more information on operating the iPod via the MMI, please
refer to the sections starting on
page 63.
•Please refer to the iPod operating instructions for important
information on how to use your iPod.
•We recommend that you update the iPod software to the latest
status.
•Your Audi dealership will be able to provide the latest informa-
tion on the Audi music interface.
Applies to vehicles: with Audi music interface and USB/mini USB adapter cable - under
development at the time of printing
Connecting a portable player via a USB/mini
USB adapter cable
Different USB memory devices can be connected to the
Audi music interface via a USB/mini USB adapter cable.
When connected, the memory devices can be put away in the
storage bay
page 15, fig. 5.
The Audi music interface supports USB memory devices belonging
to the “USB Device Subclass 1, 2 and 6”. The manufacturer will
provide you with information on the “USB Device Subclass” of a USB
memory device.
The following USB memory devices are supported:
•USB sticks
•Single card readers
•Multiple card readers (first card slot used)
•USB MP3 players that do not require special driver software
•External USB flash memory
•External USB hard drives (HDD) - 1", 1.8", 2.5" drives with a max.
starting/continuous current of 800 mA
For information on how to operate the USB memory device via the
MMI, please refer to sections starting on
page 63.
MP3/ WMA files must meet the following specifications:
A1
A2










Phone pre-installation 22
Applies to vehicles: with phone pre-installation
Bluetooth™
Bluetooth enables a wireless connection between a
mobile phone and the MMI system.
The mobile phone 3) must be bonded to the on-board phone
system in the vehicle (only has to be done once). This proce-
dure involves various steps, depending on the mobile
phone you are using. After you switch on the ignition, you
have 5 minutes to connect your mobile phone to the on-
board phone system (while the vehicle is stationary).
– Make sure that no other mobile phone is connected to
the on-board phone system via Bluetooth.
– Switch on the ignition and the MMI (if not already acti-
vated).
– Select the appropriate menu option on your mobile
phone to search for Bluetooth compatible devices
(phone pre-installation).– Connect the mobile phone to the on-board phone
system. Your on-board phone system will use the name
“Audi UHV” when it connects with the mobile phone.
– Enter the PIN for handsfree mode (“1234”) on the on-
board phone system within 30 seconds.
– Wait until your mobile phone indicates that it has
bonded. The Bluetooth symbol
fig. 14 will appear
on the MMI display.
You should change the PIN for handsfree mode to prevent unauthor-
ised use of your mobile phone
page 101.
Up to four mobile phones
You can bond up to four mobile phones to the on-board phone
system. However, it is only possible to activate one connection at a
time. If you bond a fifth mobile phone to the on-board phone
system, the system will delete the device which has not been used
for the longest time in conjunction with the on-board phone system.
Connecting and disconnecting
A mobile phone which has been bonded to the on-board phone
system and is ready to operate will be connected automatically
when you switch on the ignition. On some mobile phones you have
to confirm the connection.
The Bluetooth connection is terminated when the key is removed
from the ignition lock.
Range
The Bluetooth connection between the mobile phone and the on-
board phone system is restricted to the interior of the vehicle. The
connection can be susceptible to interference caused by other elec-
tronic devices or obstacles between the devices. For example, the
transmission quality may be affected if you keep your mobile phone
in your jacket pocket.
3)Please make sure that the mobile phone you are bonding supports the
Hands-Free Profile.
Fig. 14 Bluetooth
symbol
A1












Phone pre-installation23
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Note
•If you use mobile phones in the vehicle this can generate electro-
magnetic fields.
−For this reason, you should always operate mobile phones
with an external aerial. This also applies to mobile phones used
in Bluetooth mode. The external aerial directs the electromag-
netic fields to the exterior, which reduces the field strength in the
vehicle interior.
−If retrofitting an external aerial, please ensure that it is
installed correctly.
•For more information on how to bond your mobile phone, please
refer to the mobile phone operating instructions.
•For up-to-date information on the phone pre-installation, please
ask an Audi dealer or specialist retailer.
Applies to vehicles: with phone pre-installation
Phone book entries
The phone book entries on your SIM card and your mobile
phone directory are automatically stored in the on-board
phone system.
Loading the phone book entries
The phone book entries will be loaded into the on-board phone
system automatically when you switch on the ignition (if the mobile
phone supports this function). It may take several minutes to load
the entries, depending on how many entries are stored on the
mobile phone.
The last four phone books loaded into the on-board phone system
remain stored there. When you link a fifth mobile phone to the on-
board phone system, the phone book from the mobile phone which
has not been used for the longest time is deleted from the on-board
system. Up to 1000 phone book entries per phone book can be
stored in the memory.
Using the mobile phone again later
If the SIM card is identical, the phone book entries are already
stored in the on-board phone system. You can use the phone book
almost immediately.
The system automatically checks the phone book entries in the
background and will update the memory if the entries have
changed.
Displaying the phone book entries
The phone book entries are displayed in alphabetical order together
with a category symbol
fig. 15, e.g. SIM card, private, business,
mobile phone or telephone symbol.
Note
•Which phone book entries are displayed on the MMI will depend
on the mobile phone you are using.
•In certain cases, phone book entries from a mobile phone may
not be transmitted in alphabetical order. If more than 1000 phone
book entries exist, entries with certain initial letters may not appear
on the MMI.
Fig. 15 Finding an
entry in the phone
book











Bluetooth car telephone kit 26
link to the device which has not been used for the longest time in
conjunction with the car telephone kit.
Bluetooth connection
When you insert the ignition key, a Bluetooth connection is auto-
matically established between the car telephone kit and your
bonded mobile phone or handset*. For this, the handset must be
placed in the carrier.
The Bluetooth connection between the car telephone kit and the
mobile phone is automatically terminated when you remove the key
from the ignition lock. The connection between the car telephone kit
and the handset is terminated when you switch off the car tele-
phone kit
page 97.
Applies to vehicles: with Bluetooth car telephone kit
Switching the Bluetooth car telephone kit on
and off
– Press the function selector button marked .
– Press the function selector button marked .
– Turn the rotary pushbutton to Switch on telephone or
Switch off telephone.– Press the rotary pushbutton. The Bluetooth car tele-
phone will be turned on/off.
The telephone will be turned “on” automatically when the ignition
is switched on, as long as it was not switched off separately the last
time it was used.
Applies to vehicles: with Bluetooth car telephone kit
Bonding a mobile phone with SIM Access
Profile
The bonding procedure is started from the MMI.
The mobile phone must be bonded to your car telephone kit
(this only has to be done once). This procedure involves
Fig. 16 Switching off
the telephone
TEL
SETUP
Fig. 17 Find new
mobile phones
Fig. 18 PIN display for
entry on mobile phone






!




Bluetooth car telephone kit 28
– Using the handset, select the desired vehicle base
station (e.g. “AUDI BTA”).
– Press the control button for Conn. on the handset.
–On the MMI, select Ye s to confirm the prompt PIN entry
required. Connect? A PIN number
page 26, fig. 18 will
appear in the MMI display.
– To enter the 16-digit PIN shown in the display, select
Accept PIN
page 26, fig. 18. Enter this PIN number on
the handset while the vehicle is stationary. You will be
given about 30 seconds to complete the entry.
– To enter any other 16-digit PIN, select Enter other PIN

page 26, fig. 18. Enter any 16-digit PIN code via the
speller
page 43. Then enter this 16-digit PIN on the
handset while the vehicle is stationary. You will be given
about 30 seconds to complete the entry.
– Press the control button for OK on the handset.
The exact name of the Bluetooth-capable base station on your
vehicle (e.g. “AUDI BTA”) can be retrieved using the Bluetooth name
function
page 96.
Note
The handset can be deleted from the list of Bluetooth devices

page 96.
Applies to vehicles: with Bluetooth car telephone kit
Bonding a mobile phone with Hands-Free
Profile
The bonding procedure is started on the mobile phone.
The mobile phone must be bonded to your car telephone kit
(this only has to be done once). This procedure involves
various steps, depending on the mobile phone you are
using.
– Switch on the ignition and the MMI (if not already acti-
vated).
–Set Discoverability to on for the bonding process

page 96.
– Select the appropriate menu option on your mobile
phone to search for Bluetooth compatible devices.
– Connect the mobile phone to the car telephone kit. When
the car telephone kit is detected, you will see the name
“AUDI BTA” on your mobile phone.
Fig. 20 Mobile phone
with Hands-Free Profile
bonded and connected











Bluetooth car telephone kit29
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Enter the PIN for handsfree mode on the mobile phone
within about 30 seconds. The factory default for the PIN
for handsfree mode is 1234. A mobile phone symbol

page 28, fig. 20 will appear in the status line of the
MMI display when the mobile phone has successfully
bonded.
The external car aerial is not used. The handset* cannot be used.
Note
•Audi does not recommend using a mobile telephone with Hands-
Free Profile.
•You should change the PIN for handsfree mode to prevent other
users from connecting to your car telephone kit
page 96.
•For up-to-date information on mobile phones with the Hands-
Free Profile, please ask an Audi dealer or specialist retailer.
Applies to vehicles: with Bluetooth car telephone kit
Phone book entries
The phone book entries on your SIM card and your mobile
phone directory are automatically stored on the MMI
system.
Loading the phone book entries
The phone book entries will be loaded into the MMI automatically
when you switch on the ignition (if the mobile phone supports this
function). It may take several minutes to load the entries, depending
on how many entries are stored on the mobile phone.
The last four phone books loaded into the MMI memory remain
stored there. When you link a fifth mobile phone to the car tele-
phone kit, the phone book from the mobile phone which has not
been used for the longest time is deleted from the MMI. Up to 1255
phone book entries per phone book can be stored in the memory.
Reconnecting a mobile phone
If the SIM card is the same as before, the phone book will appear on
the MMI after a short time.
The MMI automatically checks the phone book entries in the back-
ground and will update the memory if the entries have changed.
Displaying the phone book entries
The phone book entries are displayed in alphabetical order together
with a category symbol
fig. 21, e.g. SIM card, private, business,
mobile phone or telephone symbol.
Note
•Which phone book entries are displayed on the MMI will depend
on the mobile phone you are using.
•If the SIM card is in the handset
page 31, only the SIM card
entries will be displayed.
•In certain cases, phone book entries from a mobile phone may
not be transmitted in alphabetical order. If there are too many
phone book entries, entries with certain initial letters may not be
displayed on the MMI system.
A1
Fig. 21 Phone book
entries











Basic operation 40
Basic operation
All MMI menus at a glance
The menu structure
page 38, fig. 26 and
page 39, fig. 27
contains the available options for each main function of the MMI
system.
Note
Depending on the equipment fitted in your vehicle, the menus may
differ from those shown here.
Switching on and off
Vehicles without advanced key*
– The ignition must be switched on to turn on the MMI
system. The menu of the last main function selected will
appear. The last used audio/video source will automati-
cally be activated.
– To switch off the MMI system, remove the ignition key.
Your settings will be stored.Vehicles with advanced key*
– To switch on the MMI system, press the button.
– To switch off the MMI system, press the button
twice. Your settings will be stored.
Manual mode
– To switch on the MMI system, briefly press the ON/OFF
button
fig. 28.
– To switch off the MMI system, press and hold the ON/OFF
button until the MMI is switched off.
The MMI system will not be switched on automatically when the
ignition is switched on if it was turned off manually the last time it
was operated.
The MMI system remains in operative mode for approximately 10
minutes after the ignition is switched off. If you do not press any
function selector button, control button or the rotary pushbutton on
the MMI control console within this time period, the MMI system
will be switched off automatically.
Note
If the ignition is switched off and the battery charge level is low, the
MMI system will be switched off automatically.Fig. 28 ON/OFF button
START
STOP










Listening to the radio53
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Listening to the radio
Introduction
The radio has four wavebands: FM, MW, LW and DAB* (digital radio).
The stations which are currently within reception range are
displayed in a station list and can be selected. Of course you can
tune the radio to the next available station or scan all stations via
the MMI control console. You can store your favourite stations in
any order on a memory list.
FM (very high frequency)
The FM station list (max. 30 stations) is updated automatically. You
can set the station list to display the five radio stations that you listen to most frequently at the top of the station list. Other available
stations will appear further down the list
fig. 43.
Radio stations that appear in grey lettering cannot be selected as
they are not within reception range.
Medium and long wave (MW/LW band)
The MW and LW station lists (max. 30 stations) must be updated
manually
page 54, fig. 46.
When you leave the range of reception the stations in the station
lists will still be displayed, but the reception will be poor.
Digital radio* (DAB frequency)
If you are listening to “Digital Audio Broadcasting”* the station list
shows so-called ensembles. Ensembles cover a specific area (e.g. a
city or region) and comprise various radio stations. The frequency
range can be restricted to regional ensembles
page 62.
The station list (max. 60 stations) must be updated manually. This
may take some time.
If you leave the range of reception, ensembles or radio stations
which can no longer be received are marked with the symbol

fig. 44. The symbol disappears as soon as the ensemble or radio
station can be received again.
If the MMI has been switched off for more than ten minutes (ignition
key removed), the last five ensembles that you listened to will auto-
matically be checked for reception when the MMI is switched back
on. Any ensembles that are no longer available will not appear in the
station list.
Fig. 43 FM station list
Fig. 44 DAB station list
showing stations no
longer receivedA1