2008 AUDI S8 tow

-Rotate the control knob clockwise to increase the bright­
ness, and
Rotate the control knob
counterclockwise to reduce the
brightness.
When the vehicle is unlocked, the standard lighting turns on auto­
matically and dims after approx. 2 minutes, and when the ignition is
turned on it switches off immediate ly.
A background lighting profile can be switched on manually using
the light profile
switch ~ page 76, fig. 68. This wi ll turn off automat ­
ically after 30 minutes when the ignition is off. To reac tivate , press
the lighting profile switch.
Lighting profiles that were selected while driving remain active
during the course of travel.
The following lighting profiles can be adjusted and
dimmed in the MMI:
Driver's side footwell
Passenger's side foot -
well
Rear footwell
Rear door trim panel
Front interior lighting
Rear interior lighting
[ i J Tips
Highway
X
X
X
X X
X X
X
X
Cockpit Rear
X
X
X
X
X
X
X
Lighting profiles are stored on the remote control key being used. •
Controls a nd eq uip­
ment
Clear vision
Vision
Sun visors
Using the sun visors makes driving safer.
] ~
J_~---~..r-:::Jli
WAANINO ..,
f,":a(S) ::-,....= ~ =­
=:.:=-..:GJ
- -, - ~~ ,.. __ ..... _ ... -----__ ..., ______ ---
~
,l,
\,;....l--------:.:r.::Jli
WAANINO ATTENTIOH
-- ---­
_____ ,.. ..
-----··
___ .. _
-·- ------------- ·----·---... -------------·-----
Fig . 69 Sun visor
Fig. 70 Sun visor with
two-part vanity mirror
The sun visors for the driver and front passenger can be removed
from their center mountings and moved toward the door windows
G) ~ fig. 69 to protect against side glare. After you have moved the
sun visors so that they are parallel to the door windows, you can pull
out the extensions.
Between the visors for the driver and the passenger there is a
folding visor which can be used to cover the space above the rear
view mirror.
Vehicle care I I Technical data

Clear vision
Fig. 75 Left rear roof­
lining: Vanity mirror
folded down
-To fold down, tap the rear edge of the mirror as indicated
by
arrow~ page 79, fig. 74.
As the mirror folds down, it automatically il lumina tes.•
Wiper and washer system
Windshield wiper ~
The windshield wiper lever controls both the windshield
wipers and the washer system.
Fig. 76 Windshield
wiper lever
The windshield wiper lever~ fig. 76 has the following posi ­
tions:
One-touch wiping
-Move the lever to position G) , when you want to wipe the
windshield
briefly.
Intermittent wiping <:S;)l (activating rain sensor)
-Move the lever up to position ®·
-Move switch © up or down, to adjust the sensitivity of
the rain sensor.
Low wiper speed
-Move the lever up to position G).
High wiper speed
-Move the lever up to position @.
Automatic wiper/washer
-Pull the lever to position© (toward the steering wheel)
and hold.
-Release the lever. The washer stops and the wipers keep
going for about four seconds.
Turning off the wipers
-Move the lever back to position @.
The windshield wipers and washer only work when the ignition is
turned on.
The rain sensor is only activated with the wiper leve r set to position
G) . When it starts to rain, the rain sensor will automatically activate
the intermittent wiping mode.
To reduce the sensitivity of the sensor, move switch
@ down. To
increase the sensitivity, move the switch up. The higher you adjust
the sensitivity, the faster the sensor will react when it senses mois-
.,_

ture on the windshield. The rain sensor wiper intervals depend on
t he sensitivi ty setting as well as vehic le speed . Dur ing brief s tops,
wiper motion wil l adjust in re lation to the amount of rain on the
windshield .
During br ief stops, e.g. at a red light, wiper mot ion wil l auto mati ­
ca lly be reduced to the next lower speed . Wipers a lready turning at
low speed. change to i nterm ittent w ip ing.
When the ignition is turned on, the washer jets are heated .
With the low beam headlights switched on, p ull the wiper lever
towards you only briefly to clean the windshield. Ho ld ing the w iper
lever wou ld a lso engage the headlight washer system each time you
clean the w inds hie ld and wou ld dra in t he washer flu id reservoir
pr ematurely .
& WARNING
• Wiper bl ade s are cruc ial for safe driving! Only when they are in
good condition are they able to clear the window s properly to
provide uncompromising visibilit y. Worn or damaged wiper blades
are a safety hazard
::::> page 82 , "In stalling new wiper blade s"!
• The rain sensor is only designed to a ssist and support the
driver . It r em ains entirely th e driver' s respon sibility to monitor
outside weather condit ions and to manually activate the wipers as
s oon a s rain or drizzle reduces visibility through the windshield.
• The windshield mu st not be treated with water-repellent mate ­
rials . They c an in crea se gl are under poor visibility condition s such
as wetness , darkness , or when the sun is low on the horizon. In
addition , they can cau se the wind shield wipers to chatter.
0 Note
In free zing or near freezing conditions:
• Always check that the wiper b lades are not frozen to the glass
be fore you turn the w ipe rs on. Loosen a wiper b lade w hich is frozen
Controls and equip­ ment
Clea r vision
in place before operating the wipers to prevent damage to the wiper
bl ade or the wiper motor.
• Do not use the wipers to clear a frosted window. Using the
wipers as a conve nien t ice scraper will des troy the wiper blades .
• Before you take your vehic le to an automatic car wash, make sure
you have the w inds hield w iper system switched o ff (lever in p osition
O), otherwise the windshield wiper system could get damaged in the
car was h if it should suddenly come o n.
[ i ] Tips
• Make sure the washer flu id reservo ir in the engine compartmen t
is topped off before going on a long trip . Look
up:::> page 323 for
check ing and f illing the washer conta iner.
• I f you sw itch off the ignition with the windshield wiper lever st ill
in the inte rval wi pe pos ition and t hen com e back a wh ile la ter a nd
drive off, the rain sensor wil l reactivate itself after the vehicle speed
has e xceeded 4 mph (6 km/h) .
• Worn or dirty windshie ld wiper b lades cause smearing which
ca n affect t he opera tion of the ra in senso r. Check the condi tion of
your windshield wiper b lades regu lar ly . •
Headlight washer system
The he adlight washer sy stem cle ans the he adlig h ts.
-Oper ate the win dshiel d w ip er/was her sy stem G) wit h th e
hea dlights t urned o n by ho ld ing th e l ever fo r lo nge r than
on e seco nd ::::.,
page 80, fig. 76.
The washe r jets extend f orward out of the fron t bumper dr iven by
water pressure to spray the front head lights with water .
You should inspect the head lights regu lar ly (for examp le when refu -
e ling) a nd c lean o ff any sol id dirt or i nsects from the lenses.
~

Seats a nd sto ra g e
Fig . 90 A djust ing t he
co mfort h ead re str ain t
s id e su pports
The head restrai nts on the front seats ca n be adjusted to
provide safe support to head and neck a t th e op timum
height and angle. When opt imally adjusted, the top of t he
restraint shou ld be level w ith the top of the head
~ page 203, "Proper adjustment of head restraints" .
Height adju stm ent
-Pus h the sw itch up or down to adjust the head restra int
to your
height ~ page 91, fig. 89 .
-Adjust the head restraints so that the top of the head
restraint is
at least level with your eyes or higher.
Adjust ing the angl e
-Grasp the side of the head restra ints with both hands a nd
push them forward or backward.
Adjusting the side supports
-Pull or press t he side supports into the desired positio n
~ fig. 90.
Refer to => page 203, "Proper adjustment of head restraints" for
guidelines on how to ad just the height of the front head restraints
t o suit the occupant's body s ize .
& WARNING
• Drivin g w ithout he ad r estraint s or with head re straint s th at are
not properly adju ste d incr eases the ri sk of serio us or f atal ne ck
i nj ury dram atically .
• Read and heed all WARNING S
:::> page 203.
[ i] Tips
• Correctly adjusted head restraints and safety belts are an
extremely effective combination of safety features .
• Power adjustable head restraints can only be removed by an
authorized repair faci lity.
• When you adjust the seat toward the front or upward, the head
restraints are automatically lowered to keep them clear of the roof
l iner. Be aware that after you move the seat back again toward the
rear or lower it again, the head restraints will
not automatical ly
resume their orig inal position and have to be readjusted. •
Rear head restraint (center seating position)
Fig . 9 1 Cente r rear
hea d re str aint:
a dju st ing t he h eight

___ S_ e
_ a_t_s _ a_n_ d
__ s _t _o _r _a ...::g:::.... e ________________________________________________ _
Applies to ve hicles : wi th indi vid ual r ear se ats
Settings in the MMI
The easy entry function can be turned on and off in the
MM/ .
) ' '' ' ' I
Seat adjustment
'
• Drive r·s seat ...
I I

12 :QQ AM F ig . 103 MMI Display:
Sea t ad justment
-Press the I CAR I fun ction button .
-Select Systems in the CAR menu.
Select
Seat adjustment . Th e Seat adju stment menu
appears =:> fig. 103.
Select
Left rear seat or Right r ear seat .
-Select Eas y entry on to turn on t he easy e ntry function for
the corresponding seat or
off to turn off t he f unction for
this seat.
Easy entry makes it more convenient to enter and leave the rear of
the vehicle. When th e function is turned on, the seat automatically
moves to the rearmost position when the corresponding door is
opened. •
Luggage compartment
Tie-down eyelets
The luggage c ompartment is equipped with four tie -down
eyelets to secure luggage and other items.
F ig . 104 Lu ggage
co mp artm ent tie- dow n
eye le ts
-Use the tie-dow n eyelets to secure yo ur cargo properly
=:> fig . 104 -arrows- .
-Read and heed all WARNINGS =:> page 205, "Stowing
luggage" .
In a collision , the laws of physics mean that even smaller items that
are loose in the vehicle will turn into heavy missiles that can cause
serious injury. Items in the vehicle pick up kinetic energy which
varies with the vehic le and the weight of the item . Vehicle speed is
the most significant factor.
For example , in a frontal collision at a speed of 30 mph (48 km /h) ,
the forces acting on a 10-lb (4 .5 kg) object are about
20 times the
normal weight of the i tem . This means that the weight of the item
would suddenly be the equivalent of about 200 lbs (90 kg). One can
easily imagine the injuries that an i tem of tha t weight flying free ly _,,,

___ S_ e_ a_t _s _a_ n_d _ s_t _o _r_ a...; g::::.... e ______________________________________________ _
The mounting hooks are spring-loaded and will return to their
normal position when not in use.
& WARNING
For strength-related reasons, the mounting hooks can only be
used to secure objects weighing up to 10 lb .
15 kgl. Heavier objects
will not be adequately secured -there is a risk of injury. •
Applies to ve hicles : w ith ski sack
Ski sack
Use the ski sack to transport and protect skis and other
long, light items in the passenger compartment.
0 •------0
Fig . 107 Luggage
compartment ski sack
hatch
Fig . 108 Ski sack:
securing
Load the ski sack from the luggage compartment.
Loading
- Open the luggage compartment lid and clear a space in
the center.
- Press the release button for the ski sack hatch in the
luggage compartment and pull down the hatch
~ fig. 107.
- Fold out center armrest in the rear seat backrest.
- Press the release button on the lid from inside the vehicle, and then lower the lid.
- Pull out and unfold the ski sack.
- Load skis or similar objects through the luggage
compartment into the interior of the
vehicle=}& .
Securing
-Insert the ski sack strap@=} fig. 108 in the center buckle
®·
- Pull the safety belt taut on the free end of the belt@.
Securing in vehicles with power individual rear
seats*
Loop the ski sack safety belt around the center arm rest.
- Pull the safety belt taut on the free end of the belt.
Stowing
-In the luggage compartment, close the ski sack hatch.
- Fold the ski sack carefully and stow away.
- Close and engage the inner hatch.

________________________________________________ S_ e_ a_t _
s _a_ n_d _ s_t _o _ r_ a_ g~ e __ _
& WARNING
• The ski sack is intended only for the transportation of skis and
other light objects. To reduce the risk of serious personal injury,
never transport heavy or pointed objects in the ski sack.
• When braking rapidly or during an accident, the load could be
displaced and cause injury to occupants.
• Sharp edges on the load must be covered for protection.
Always fasten the belt tightly around the sack and its contents
=:> page 102, fig. 108.
[ i] Tips
Never stow the ski sack away when it is still wet or damp (for
example, snow melting from skis). Allow i t to dry completely before
stowing it away. •
Roof rack
First things first
A roof rack can be fitted to carry additional luggage on
the roof.
- Always read and follow the instructions provided by the
roof rack manufacturer when the roof rack system must
be installed.
If a roof rack or similar luggage carrying equipment is to be
installed, please note the following:
• To enhance the vehicle's streamlined design, rain gutters have
been molded into the roof. It is not possible to use normal roof
racks. Only install a roof rack specifically designed for your model
A8. Contact the nearest Audi dealer for information on approved modular roof racks for your vehicle.
Controls and equip­
ment
• These approved roof racks are the basis for a complete roof rack
system. Additional attachments for the basic roof rack are neces ­
sary to safely transport luggage, bicycles, surf boards, skis or small
boats. All necessary hardware for these systems is available at your
authorized Audi dealer.
• We recommend that you keep the installation instructions for
your roof rack system together with your Owner's l iterature in the
vehicle.
When should the roof rack be removed?
• Before going through an automatic car wash (it is best to ask the
car wash operator for advice)
• When not in use, to reduce fuel consumption, wind noise and to
guard against theft.
& WARNING
• Use of an unapproved roof rack or incorrect mounting of an
approved roof rack can cause the roof rack or the items attached
to it to fall off the roof onto the road.
• Objects falling from the roof of a vehicle can cause a crash and
personal injury.
• Only mount the system between the markings shown in
~ page 104, fig. 109.
• The roof rack system must be installed exactly according to the
instructions provided.
(D Note
• Your vehicle warranty does not cover any damages to the vehicle
caused by using roof racks or mounting struc tures not approved by
Audi for your vehicle. The same applies to damage resulting from
incorrect roof rack installation.
• Always check the roof rack mountings and hardware before each
trip and during a trip to make sure everything is securely tightened.
~

Seats and storage -______________ ___,;.____.
Compartments in the door trim panels
Fig. 121 Storage
compartment in the
door panel
-To store items, tilt the compartment open => fig. 121.
& WARNING
Read and follow all WARNINGS => page 238, "Important safety
instructions on the side airbag system" .•
Appl ies to vehicles: with compartments in the rea r doors
Storage compartments in the rear doors
Contro ls a nd eq uip­
ment
Fig . 122 Open storage
compartment Fig. 123 Inserting
storage compartment
The storage compartment is suitable for holding small
objects, such as eye glasses.
Opening
-To open, touch the compartment at the front edge
=> fig. 122.
Removing and inserting storage compartment
-Open the storage compartment.
-Grasp the sides of the storage compartment with both
hands and pull it straight out toward you.
-To insert the storage compartment again, hold it at a
slight angle and push the lower part into the retainer
until it
latches => fig. 123.
-Close the storage compartment. •
Vehicle care I I irechnical data