2008 AUDI A8 wheel

Television75
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Using the Memory control button
– Press the Memory control button.
– Turn the rotary pushbutton and select Store channel
name
page 74, fig. 67.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Using the TV control control button
– Press the control button for TV control.
– Turn the rotary pushbutton to STORE
page 74, fig. 68.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Note
You can delete only one or all channels from the memory list

page 76.
Applies to vehicles: with DVB-T
Selecting a stored channel
Important: A channel must be stored in the memory list

page 74.
– Press the Memory control button. The memory list will be
displayed.
– To select a channel from the memory list, turn the rotary
pushbutton to the channel.
– Press the rotary pushbutton. The channel will be
selected.
Note
Why don't you try selecting a stored TV channel using the multi-
function steering wheel
page 131?
Applies to vehicles: with DVB-T
Moving a stored channel
Important: A channel must be stored in the memory list

page 74.
– Press the Memory control button. The memory list will be
displayed.
– Turn the rotary pushbutton to select the channel and
press the rotary pushbutton.
– Press the rotary pushbutton again and hold it down until
Store channel name appears in the MMI display, or
– Turn the rotary pushbutton to Move channel name and
press to confirm.










Television77
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Note
The electronic programme information cannot be displayed while
the vehicle is in motion.
Applies to vehicles: with DVB-T
Teletext (TT)
– Select: Function selector button > source TV >
control button TV control > TT (teletext).
If the reception is poor, the display may show incomplete sections
of text or defective characters. If there is no teletext available, the
first line of the teletext display will show “No Teletext service”.
Changing the teletext page
To switch to the previous or next teletext page turn the rotary push-
button. To enter a teletext page number press the rotary pushbutton
and enter the number by turning and pressing the pushbutton as
often as required.
Note
•Whether teletext is available on the channel you have selected is
also indicated by a symbol on the info bar
page 73.
•The teletext function is not available while the vehicle is in
motion.
Applies to vehicles: with DVB-T
Teletext Zoom
– Select: Function selector button > source TV >
function selector button > Te l e t e x t z o o m.
Teletext zoom on
If you turn the rotary pushbutton, first one half, then the other half
and finally the entire teletext page will be displayed.
Applies to vehicles: with analog TV and DVB-T
Display settings
– Select: Function selector button > source TV >
function selector button > Brightness, Contrast,
Colour, Tint or Pict. format.
Brightness
Turn the rotary pushbutton clockwise/anti-clockwise to
increase/reduce the brightness of the display.
Contrast
Turn the rotary pushbutton clockwise/anti-clockwise to
increase/reduce the picture contrast of the display.
Tint
10)
Turn the rotary pushbutton clockwise/anti-clockwise to
increase/reduce the colour intensity of the display.
Picture format
The picture is displayed in the format 16:9 or 4:3.
Applies to vehicles: with DVB-T
Sound channel (DVB-T)
– Select: Function selector button > source TV >
function selector button > Sound chnl.
MEDIA
MEDIA
SETUP
10)Applies to NTSC TV standard.
MEDIA
SETUP
MEDIA
SETUP










Television79
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control The DVB-T hybrid tuner* supports the DVB-T standard and the
analog TV standards PA L, NTSC and SECAM.
If you select the wrong TV standard the following problems can
occur: no picture or a poor picture, no colour picture, no audio
output or no reception of certain analog or digital channels.
Note
The TV standard is preset at the factory to the TV standard of the
country to which the vehicle is sold.
Applies to vehicles: with external AV source
AV standard
– Select: Function selector button > source
External AV source 1/2 > function selector button
> AV standard.
You can select from Default setting, PA L, SECAM or NTSC.
If you select the wrong AV standard, the following problems can
occur: no picture or a poor picture or no colour picture.
Applies to vehicles: with DVB-T
Channel following
The Channel Following function ensures that you remain
tuned to the selected TV channel.
– Select: Function selector button > source TV >
function selector button > Channel Following.
Channel Following on
The activated Channel Following function tries to retain the current
TV channel even if you leave its transmission area.
Channel Following off
If you leave the transmission area of the currently selected TV
channel, it may no longer be received.
MoroccoMorocco
Eastern Europe
PA L B GEstonia
Eastern Europe
PA L D K
a)at the time of print.
TV standard a)Valid for the following countries
MEDIA
SETUP
MEDIA
SETUP










Managing the directory81
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton to open the entry space
Surname. The speller will appear on the MMI display

page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry space will appear in the
MMI display.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Importing entries from the phone book
Entries can be imported into the directory from the phone
book of your mobile phone.
Important: The directory must be open
page 80 and the
phone pre-installation
page 20 or the Bluetooth car tele-
phone kit
page 25 must be activated.
Importing an entry
– Press the control button for Import. The menu From
phone book will appear on the MMI display
fig. 72.– To import an entry from the list turn the rotary push-
button to mark the entry and press to confirm. The entry
will then be imported.
– To find an entry on the SIM card or in the phone book of
your mobile phone, turn the rotary pushbutton to select
Find entry
page 80, fig. 70. The speller will appear on
the MMI display
page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry will then be imported.
Importing all entries
– Press the control button for Import. The menu From
phone book will appear on the MMI display
fig. 72.
– Turn the rotary pushbutton to select Import all entries
and press it. The entries will then be imported.
You can only store up to 150 entries in the directory. If there are
more entries on the SIM card or in the phone book of your mobile
phone than there are memory positions in the directory, a message
will appear in the MMI display. You can either store entries from the
SIM card or the phone book to the free memory positions or stop the
import function.
Note
You can call up the memory capacity of the directory
page 86.
Fig. 72 Importing
entries from mobile
phone book










Managing the directory83
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– If two telephone numbers are stored to the entry, turn the
rotary pushbutton to select one of the two and press to
confirm. The telephone number will be dialled.
Applies to vehicles: with navigation system
Navigation
You can navigate directly to entries that have navigation
destinations.
Important: The directory must be open
page 80, it must
contain stored entries with a navigation destination

page 84, and the navigation DVD must be inserted

page 14.
– Press the Options control button.
– Turn the rotary pushbutton to Navigate to and press the
rotary pushbutton. A list of entries will appear in the MMI
display.
– Use the speller to find an entry from the list
page 82.– If two navigation destinations are stored to the entry,
turn the rotary pushbutton to select one of the two and
press to confirm. The navigation system will be activated
and will calculate the route.
Editing an entry
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Importing a telephone number
You can import a telephone number to an existing entry
in the directory.
Fig. 75 Selecting a
navigation destination
Fig. 76 Importing
numbers using the
speller
Fig. 77 Importing the
telephone number
from a received call





 




Managing the directory85
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Turn the rotary pushbutton and select Country.
– Press the rotary pushbutton. The speller will appear on
the MMI display
page 43.
– Using the speller, enter the name of the country and
confirm your entry by turning the speller to OK and then
pressing the rotary pushbutton.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
– Turn the rotary pushbutton to Store destination

page 84, fig. 79.
– Press the rotary pushbutton to store the navigation desti-
nation.
Importing a recent destination
– Turn the rotary pushbutton to select Nav. destination
(business) or Nav. destination (private).
– Press the rotary pushbutton. An entry space will now
appear
page 84, fig. 78.
– Turn the rotary pushbutton to Copy from last
destinations
page 84, fig. 78. A list of navigation desti-
nations will appear.
– Turn the rotary pushbutton to select a navigation desti-
nation.
– Press the rotary pushbutton to import the navigation
destination.
– Turn the rotary pushbutton to Store destination

page 84, fig. 79.– Press the rotary pushbutton to store the navigation desti-
nation.
All directory entries can be stored with two navigation destinations.
These navigation* destinations can be accessed via the Memory
control button (Load from directory)
page 115.
Note
You can also set a navigation destination as a top destination. Top
destinations are displayed in the navigation main menu

page 116.
Changing or copying an entry
Entries are stored in the directory as address cards which
you can change anytime.
Important: The directory must first be opened
page 80.
– Press the control button for Edit.
– To change an entry, turn the rotary pushbutton to Change
entry.
– To copy an entry, turn the rotary pushbutton to Copy
entry. The copied entry will be appended with (Copy).
– Press the rotary pushbutton. A list of entries will appear
in the MMI display.
– To select an entry from the list turn the rotary pushbutton
to mark the entry and press to confirm, or
– To find an entry, turn the rotary pushbutton to Find entry
and press to confirm. The speller will now appear on the
MMI display
page 43. You can use it to search for a
specific entry
page 82.










Using the telephone87
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Using the telephone
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Introduction
You can operate a mobile phone* or the handset conveniently via
the MMI system. It does not matter whether the mobile phone is
connected to the Bluetooth car telephone kit or the phone pre-
installation. The basic operation via the MMI control console is
always the same.
Many telephone functions that you are familiar with from your land
line or your mobile phone are available in your vehicle: You can
answer and end calls, place calls on hold and go back and forth
between two separate calls (switching calls). In addition, you can
access the MMI directory, the phone book on your SIM card and the
phone book on your mobile phone.
When you place or receive telephone calls the audio source is
muted automatically and the current media drive is paused. A
crossed-out loudspeaker will appear in the display when the system
is muted. After the call the audio source will return to its previous
volume.
You can set the system so that it will switch off the navigation* voice
guidance during phone calls if desired
page 119.
Caution
•You must switch off the telephone system via the MMI menu
(Setup Telephone) in areas where the use of mobile telephones is
prohibited. Please observe all relevant caution notices and regula-
tions.
•Switch off the car telephone kit, the handset*
page 140 and
any other mobile phones in all areas where there may be a risk of
explosion. Remember that these areas may not always be
adequately marked. Such places are filling stations, fuel and chem-
ical storage facilities or transport vehicles and other places where fumes, chemicals (e.g. from leaking propane or fuel vapours in vehi-
cles or buildings) or large quantities of dust particles (e.g. from
flour, wood or metal) could accumulate in the air. This warning also
applies to all other places where you would normally switch off your
engine.
Note
The telephone functions will depend on the mobile network service
provider and the mobile phone used. For more information, contact
your service provider.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Requirements for using the
telephone
If you want to use the telephone function of your MMI system, one
of the following requirements must be met:
•A mobile phone must be connected to the Bluetooth car tele-
phone kit
page 24, or
•A handset* must be connected to the Bluetooth car telephone kit

page 27, or
•A mobile phone must be connected to the phone pre-installation

page 19.
In vehicles fitted with a Bluetooth car telephone kit, the car tele-
phone must be switched on
page 26.










Using the telephone89
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control PUK code (Personal Unblocking Key)
The 8-digit PUK code (Personal Unblocking Key) is used to unblock a
SIM card which has been blocked.
You receive the PUK code from your mobile network service provider
together with the SIM card. If you have entered the PUK code incor-
rectly ten times
11) in a row, please contact your service provider.
Note
•An emergency call (SOS) can be placed without first entering the
PIN code. In such cases you will be connected with the emergency
services number 112
page 89.
•You can also enter the PIN code via the handset*
page 140 or
the mobile phone.
•You can save the PIN code in the MMI using the Autom. PIN
recognition function
page 98.
•For more information on PIN settings, please refer to

page 98.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Emergency calls
You can place an emergency call at all times - with or
without entering the PIN code.
Important: The MMI system
page 38 and the car tele-
phone or the mobile phone* must be switched on.
Without SIM card
– Press the function selector button marked . The
speller for entering the PIN code will appear on the MMI
display .
– Press the control button for SOS
fig. 82.
– Turn the rotary pushbutton and select Dial.
– Press the rotary pushbutton to start the emergency call.
With SIM card and PIN entered
– Press the function selector button marked . The
speller will appear on the MMI display.
– Enter the emergency number (e.g. 112) via the speller.
– To start the emergency call press the control button Dial,
or
–Turn the speller to OK and press the rotary pushbutton.
Emergency numbers are not the same for all countries. Please make
sure that you know the emergency number for the country you are
in.
Always follow the directions of the emergency operators when
making an emergency call and do not end the call before you are
requested to do so.
If you make an emergency call from a mobile phone with Hands-
Free Profile*, you may have to end the call from the mobile phone.
Whether or not you can end the call from the MMI depends on the
type of mobile phone used.
Fig. 82 Control button
SOS
TEL
TEL