2008 AUDI A4 Telephone

Basic operation51
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the button , the rotary pushbutton
and the top right control button simultaneously.
– Then release the buttons. The MMI system will switch off
and then restart.
Other settings
MMI menu language
– Select: Function selector button > control button
Settings > Menu language.
The language of texts shown on the MMI display and the driver
information system as well as the language of the voice guidance*
can be altered.
You can select the languages German, English, French, Italian,
Spanish, Portuguese, Dutch or Russian.
Measurement units
– Select: Function selector button > control button
Settings > Measurement units.
You can alter the measurement units shown on the MMI display, the
driver information system and the air conditioner display.
The units for distance (km or miles), speed (km/h or mph), tempera-
ture (°C or °F) and pressure (bar or psi) can be set.
Applies to vehicles: with speech dialogue system
Speech dialogue system
– Select: Function selector button > control button
Settings > Speech dialogue system.
Repeat command
If Repeat command is activated, the speech dialogue system* will
repeat your commands when switching to another function.
Deleting all name tags
All the name tags (spoken names or telephone numbers) you have
stored will be deleted.
Default settings
– Select: Function selector button > control button
Settings > Default settings.
This function resets the general settings, the sound settings as well
as several of the radio, CD, TV/AV*, telephone* and navigation*
settings to the default settings.
Brightness of the MMI display
– Select: Function selector button > control button
Display > Brightness.
You can alter the brightness of the display by turning the rotary
pushbutton clockwise or anti-clockwise.
SETUPA1A2
A3
SETUP
SETUP
SETUP
SETUP
SETUP










Listening to the radio53
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Listening to the radio
Introduction
The radio has four wavebands: FM, MW, LW and DAB* (digital radio).
The stations which are currently within reception range are
displayed in a station list and can be selected. Of course you can
tune the radio to the next available station or scan all stations via
the MMI control console. You can store your favourite stations in
any order on a memory list.
FM (very high frequency)
The FM station list (max. 30 stations) is updated automatically. You
can set the station list to display the five radio stations that you listen to most frequently at the top of the station list. Other available
stations will appear further down the list
fig. 43.
Radio stations that appear in grey lettering cannot be selected as
they are not within reception range.
Medium and long wave (MW/LW band)
The MW and LW station lists (max. 30 stations) must be updated
manually
page 54, fig. 46.
When you leave the range of reception the stations in the station
lists will still be displayed, but the reception will be poor.
Digital radio* (DAB frequency)
If you are listening to “Digital Audio Broadcasting”* the station list
shows so-called ensembles. Ensembles cover a specific area (e.g. a
city or region) and comprise various radio stations. The frequency
range can be restricted to regional ensembles
page 62.
The station list (max. 60 stations) must be updated manually. This
may take some time.
If you leave the range of reception, ensembles or radio stations
which can no longer be received are marked with the symbol

fig. 44. The symbol disappears as soon as the ensemble or radio
station can be received again.
If the MMI has been switched off for more than ten minutes (ignition
key removed), the last five ensembles that you listened to will auto-
matically be checked for reception when the MMI is switched back
on. Any ensembles that are no longer available will not appear in the
station list.
Fig. 43 FM station list
Fig. 44 DAB station list
showing stations no
longer receivedA1





 




Listening to the radio55
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Selecting a station from the station
list
The station lists show the available stations on the wave-
band currently set.
Important: The system must be set to the desired waveband

page 54 and the available radio stations must be listed in
the MMI display
page 54.
FM band
– Turn the rotary pushbutton to mark the station you wish
to select.– Press the rotary pushbutton to select the station.
MW / LW band
– To update the station list, turn the rotary pushbutton to
Update station list
page 54, fig. 46 and press the
rotary pushbutton.
– Turn the rotary pushbutton to mark the station you wish
to select.
– Press the rotary pushbutton to select the station.
DAB* band (digital radio)
– To update the station list, turn the rotary pushbutton to
Update station list
page 53, fig. 44 and press the
rotary pushbutton.
– Turn the rotary pushbutton to select an ensemble and
press the rotary pushbutton. The radio stations of the
selected ensemble will be displayed.
– Turn the rotary pushbutton to mark the station you wish
to select.
– Press the rotary pushbutton to select the station.
Available secondary services* (additional services provided by DAB
radio stations, e.g. traffic reports) are marked with an arrow

fig. 49. By selecting the radio station providing secondary serv-
ices again, the available secondary services will appear in the MMI
display.
Note
Did you know that you can also operate this function with the multi-
function steering wheel
page 130?
Fig. 48 Station list for
FM waveband
Fig. 49 Secondary
services available










Listening to the radio57
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton again to stop the SCAN func-
tion. The system will select the station currently
playing.
Storing stations
The memory list can contain up to 25 stations from all
wavebands.
Important: You must first select a TV channel
page 56.Using the rotary pushbutton
– Press and hold the rotary pushbutton until the station
appears in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the station to the position on the memory list,
press the rotary pushbutton.
Using the Memory control button
– Press the Memory control button.
– Turn the rotary pushbutton and select Store station name

fig. 53.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the station to the position on the memory list,
press the rotary pushbutton.
Using the Tuning control button
– Press the control button for Tuning.
– Turn the rotary pushbutton to STORE
fig. 52.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the station to the position on the memory list,
press the rotary pushbutton.
Fig. 52 Storing a
station
Fig. 53 Storing a
station










Listening to the radio59
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control Traffic reports are automatically recorded for about one hour after
the MMI has been switched off. The recorded reports can be called
up via the TP memo function
page 121. Use the options Timer 1
and Timer 2 to set specific times at which you want to record traffic
reports
page 123.
Regional station function
Important: The radio must be set to the FM waveband

page 54.
– Select: Function selector button > function
selector button > Regional stations.
Some FM stations split up their transmission and provide different
regions with regional programmes with differing content.
Regional station function on
All regional stations can be received.Regional station function off
Only the regional station with the strongest reception can be
received.
Station reception
Important: The radio must be set to the FM, MW or LW wave-
band
page 54.
– Select: Function selector button > function
selector button > Station reception.
Station reception - local
The automatic search function (in FM, MW and LW waveband) will
only stop at stations/frequencies with a strong reception signal.
Station reception - distant
The automatic search function (in FM, MW and LW waveband) will
also stop at stations/frequencies with a weaker reception signal.
Station names
Important: The radio must be set to the FM waveband

page 54.
– Select: Function selector button > function
selector button > Station names.
Station names - scrolling
Scroll texts transmitted by FM stations will appear in the MMI
display.
Station names - fixed
Scroll texts transmitted by FM stations will not appear in the MMI
display. The current scroll text in the display will freeze.
TP symbolFunction
Filled inThe Traffic Programme function is activated.
Traffic news stations can be received and traffic
reports will cut in.
Not filled inThe Traffic Programme function has been
switched off. Traffic news stations can be
received, but no traffic reports will cut in.
Crossed outThe Traffic Programme function is activated. No
traffic news station can be received. No traffic
reports will cut in.
Not displayedThe Traffic Programme function has been
switched off. No traffic news station can be
received.
RADIO
SETUP
RADIO
SETUP
RADIO
SETUP










Listening to the radio61
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Deleting last stations
Important: The radio must be set to the FM waveband

page 54.
– Select: Function selector button > function
selector button > Delete last stations.
Use this function to delete your favourite FM stations, which are
listed in the first five positions of the station list
page 54, fig. 45.
A new list of favourite stations will be compiled automatically.
Note
You can turn the display of your favourite FM stations on and off

page 60.
Deleting stored stations
Important: A station must be stored in the memory list

page 57.
– Select: Function selector button > function
selector button > Delete stored stations > Delete
individually or Delete all entries.
Delete individually
Select Delete individually and then select the station you would like
to delete by turning and pressing the rotary pushbutton.
Delete all entries
Select Delete all entries by turning and pressing the rotary
pushbutton.
Applies to vehicles: with digital radio (DAB)
Displaying radio texts
Important: The radio must be set to the DAB waveband

page 54.
– Select: Function selector button > control button
Tu n e > TEXT.
Radio texts are additional pieces of information that are broadcast
by some radio stations (e.g. station name, artist or track).
Applies to vehicles: with digital radio (DAB)
Displaying data services
Important: The radio must be set to the DAB waveband

page 54.
– Select: Function selector button > control button
Tuning > INFO.
Some stations also use data services to broadcast images.
Applies to vehicles: with digital radio (DAB)
Service Following
Important: The radio must be set to the DAB waveband

page 54.
– Select: Function selector button > function
selector button > Service Following.
Service Following on
The activated Service Following function tries to retain the current
radio station even if you leave its transmission area. While the auto-
RADIO
SETUP
RADIO
SETUP
RADIO
RADIO
RADIO
SETUP





!




Playing media63
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Playing media
Introduction
Your MMI system also disposes of a CD function which does not
differ at all from that of a normal CD changer. Insert an audio CD or
MP3/ WMA CD into the CD changer
page 12. You can then select
individual tracks directly, shuffle the CD tracks in random order or
play each track for just a few seconds. In addition, you can connect
a portable player (e.g. an iPod or a USB memory device) to the Audi
music interface and operate it via the MMI control console.
Activating media
Important: The MMI system must be switched on and a CD
must be inserted into the CD changer
page 12, or a port-
able player must be connected to the Audi music inter-
face*
8)
page 15.Audio source: CD
– Press the function selector button marked . The
inserted CD will then be played.
– If the list of CD tracks
page 65, fig. 57 does not appear
on the MMI display, press the control button for Source

fig. 54.
– Turn the rotary pushbutton to CD
fig. 54.
– Press the rotary pushbutton to select CD as the source.
The inserted CD will then be played.
Audio source: Audi music interface*
– Press the function selector button marked . The
tracks on the connected portable player will be played.
– If the list of tracks on a connected portable player

page 64, fig. 56 does not appear on the MMI display,
press the control button for Source.
– Turn the rotary pushbutton to Audi music interface

fig. 54.
– To select Audi music interface as the source, press the
rotary pushbutton. The tracks on the connected portable
player will be played.
Note
The playback will be interrupted by traffic announcements if the
Traffic Programme function is active
page 58.
8)Still under development at the time of printing.
Fig. 54 List of possible
audio/video sources
MEDIA
MEDIA





! 




Playing media65
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Selecting a track
The tracks and their playing times appear on the MMI
display.
Important: A CD
page 64 or a folder
page 64 must be
selected.
– Turn the rotary pushbutton to mark a track
fig. 57.
– Press the rotary pushbutton to select the track. The track
will then be played.
If ID3/ WMA tag information on the current track (e.g. artist) is avail-
able, it will be displayed as a pop-up for the track currently playing.
For this, the function track information must be switched on

page 69.
Note
Did you know that you can also operate this function with the multi-
function steering wheel
page 130?
Fast forward/rewind and
next/previous track
You can fast forward and rewind within a track and jump
to the next/previous track within a CD or a folder.
Important: A track must be playing
page 65.
Fast forward/rewind
– Press the control button for CD control.
– Turn the rotary pushbutton to >> (forward)
fig. 58 or <<
(rewind) and press and hold the rotary pushbutton.
Next/previous track
– Press the control button for CD control.
– Turn the rotary pushbutton to >| (next)
fig. 58 or |<
(previous).
– Press the rotary pushbutton to jump to the next/previous
track. The track will then be played.
If you start the rewind function while a CD track
page 64 or a track
on an iPod (connected via an iPod adapter cable)
page 16 is
Fig. 57 List of CD
tracks
Fig. 58 Forward





!