144
– Two or more spare wheels should never
be used together. Have the wheel changed
repaired and refitted as soon as possible.
Rims
The bolts should be tightened to a
torque of 86 Nm (8.8 kgm).
Tyres
The tyres installed on the vehicle are of
the tubeless type and do not have an in-
ner tube. To obtain the greatest degree of
comfort, safety and length of life of the
tyres, the following recommendations
should be observed.
– With new tyres do not drive at full
speed until the first 100 km have been
reached.
– Before entering a tight bend, even if
the vehicle permits it, reduce speed.
– Avoid sharp acceleration and unneces-
sary braking.
– Do not travel for long periods at sus-
tained high speed especially on rough
roads.– Have the wheels balanced and the
front and rear axles set correctly.
– Avoid hitting the side walls of the
tyres, for example when parking.
– Never tamper with the valve on the
tyre.
– Do not insert anything between the
rim and the tyre.
– If the rim is bent, have it replaced.
– In the event of an abnormal drop in
the tyre pressure replace the wheel and
have it checked.
– When balancing the wheels use the
counterweights which are specifically de-
signed for tubeless tyres. To balance light
alloy rims only Alfa Romeo original
weights should be used.
– The tyre pressure, including that of
the spare wheel must reflect the indica-
tions given in the “Technical specifica-
tions” of this manual.
– Have the tyres checked periodically to
ensure that they are not damaged in any
way.– Second-hand tyres of unknown origin
or over 6 years old must only be used in
emergencies and with great care.
– Inner tubes must not be fitted to
tubeless tyres.
– Avoid parking the vehicle on the edge
of a step or other irregularities in the road
surface.
– Have the tyre tread checked periodi-
cally and replace when the legal mini-
mum is reached.
IMPORTANT Some types of tyres are
fitted with wear indicators. As soon as
these wear indicators appear on the tyre
tread, the tyres must be replaced.
Periodically check that the tyres are not
showing signs of irregular tread wear. If
they are, contact Alfa Romeo Authorized
Services who will eliminate the cause of
irregular wear.
Tread wear increases the danger of
aquaplaning on wet surfaces.
164
– Put jack and tools back in the bag
and stow it in the boot
Do not grease the threads
of bolts before installing
them; they might slip out.
The bolts should be tightened to a
torque of 86 Nm (8.8 kgm).
You are advised to have the wheel
bolt tightening checked by Alfa
Romeo Authorized Services as
soon as possible.
Indeed, insufficient tightening may
cause the wheel bolts to slacken
with the obvious dangerous con-
sequences. Excessive tightening
can strain the bolts.
WARNING
A0D0053m
fig. 19
A0D0052m
fig. 22
612PGSm
fig. 18
A0D0140m
fig. 17
A0D0142m
fig. 21
A0D0141m
fig. 20
