60
3
C O M F O R T
REAR SEATS
Bench seat, the left-hand (2/3) or
right-hand (1/3) section of which
can be folded to adapt the boot load
space.
Removing the seat cushion
Move the corresponding front
seat forwards if necessary.
Raise the front of the seat cush-
ion 1 .
Tilt the seat cushion 1 fully
against the front seat.
Remove the seat cushion 1 from
i t s fi x i n g s b y p u l l i n g u p w a r d s . Refitting the seat cushion
Position the seat cushion 1 verti-
c a l l y i n i t s fi x i n g s .
Fold down the seat cushion 1 .
Press on the seat cushion to se-
cure it.
Folding the seat
In order to fold a rear seat without
any risk of damage, always start
with the seat cushion, never with
the seat back:
move the corresponding front
seat forwards if necessary,
raise the front of the seat cushion 1 ,
tilt the seat cushion 1 fully against
the front seat,
check that the seat belt is posi-
tioned correctly on the side of
the seat back,
lower or remove the head re-
straints if necessary,
pull the control 3 forwards to re-
lease the seat back 2 ,
tilt the seat back 2 .
The seat cushion 1 can be removed
to increase the loading volume. Returning the seat back to its
original position
When returning the rear seat back to
its original position:
put the seat back 2 in the upright
position and secure it,
fold the seat cushion 1 ,
r e fi t t h e h e a d r e s t r a i n t s o r p u t
them back in place.
When returning the rear seat back
to its original position, take care not
to trap the seat belts and ensure
that their buckles are positioned cor-
rectly.
The red indicator on the control 3
should no longer be visible; if it is,
push the seat fully back.
76
4
A C C E S S
BOOT (SALOON)
Press upwards on lever 1 and lift
up the boot. With the vehicle stationary, this is
carried out using:
- The remote control.
- The key in a door lock.
- The interior central locking/
unlocking control.
The boot automatically locks when
the vehicle is moving at a speed of
over 6 mph (10 km/h), even if auto-
matic central locking is deactivated.
It is unlocked when a door is opened
or when the central locking button is
pressed (speed lower than 6 mph
(10 km/h)).
Opening
Locking/unlocking Tailgate release
System for mechanical unlocking of
the boot in the event of a battery or
central locking malfunction.
Unlocking
Fold back the rear seats to gain
access to the lock from inside
the boot.
Insert a small screwdriver into
hole A of the lock to unlock the
tailgate.
Push the white part, located in-
side the lock, to the left to unlock
the boot.
1 0 0
6
L A Y O U T
LUGGAGE COVER (TOURER)
To roll up
Press the handle (PRESS) gently.
The luggage cover rolls up auto-
matically.
The moving part A c a n b e f o l d e d
a l o n g t h e r e a r b e n c h s e a t b a c k r e s t .
To remove
Compress the control 1 and lift
the luggage cover on the right
then on the left to remove it.
To install
Position the left-hand end of the lug-
gage cover roller in its location B
b e h i n d t h e r e a r b e n c h s e a t .
Compress the roller control 1
and put the roller in place in its
location C on the right.
Release the control to secure
the luggage cover.
Unroll it to its fastening on the
b o o t p i l l a r . High load retaining net
(Tourer)
H o o k e d o n t o t h e s p e c i a l u p p e r a n d
l o w e r fi x i n g s , t h i s p e r m i t s u s e o f t h e
entire loading volume up to the roof:
- b e h i n d t h e r e a r s e a t s ( r o w 2 ) ,
- b e h i n d t h e f r o n t s e a t s ( r o w 1 )
when the rear seats are folded.
W h e n p o s i t i o n i n g t h e n e t , c h e c k t h a t
t h e s t r a p l o o p s a r e v i s i b l e f r o m t h e
b o o t ; t h i s w i l l m a k e s l a c k e n i n g o r
tightening easier.
