2007 YAMAHA GRIZZLY 660 check oil

[x] Cancel search: check oil

Page 8 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual EBU17420
TABLE OF CONTENTS
SAFETY INFORMATION  .............................. 1-1
LOCATION OF THE WARNING AND 
SPECIFICATION LABELS  ............................ 2-1
DESCRIPTION ......................

Page 9 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual OPERATION .................................................. 6-1
Starting a cold engine  ................................ 6-1
Starting a warm engine  .............................. 6-3
Operating the d

Page 22 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual 3-1
3
EBU17680
DESCRIPTION 
EBU17690Left view
EBU17700Right view
1. Radiator cap
2. Fuel tank cap
3. Fuel cock
4. Oil filter cartridge
5. Throttle stop screw
6. Fuses
7. Engine oil dipstick
8. Recoil

Page 46 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual 5-1
5
EBU19200
PRE-OPERATION CHECKS
EBU19220Pre-operation check list Before operating this ATV, be sure to check the items listed in the following table.NOTE:The maintenance of some items in the table

Page 48 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual 5-3
5
EBU19540Fuel Make sure that there is sufficient fuel in the tank.
(See page 4-15.)
WARNING
EWB00520Do not overfill the fuel tank. Fuel expands
when it heats up. If the fuel tank is overfilled,

Page 89 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual 8-5
8
15*Shock absorber as-
sembliesCheck operation and correct if necessary.
Check for oil leakage and replace if necessary.√√√
16*Stabilizer bushesCheck for cracks or other damage, and repl

Page 90 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual 8-6
8
26 Final gear oilChange.
Check ATV for oil leakage, and correct if neces-
sary.√√
27 Cooling systemCheck coolant level and ATV for coolant leakage, 
and correct if necessary.√√√√

Page 101 of 156

YAMAHA GRIZZLY 660 2007  Owners Manual 8-17
8
NOTE:If a torque wrench is not available when installing
a spark plug, a good estimate of the correct torque
is 1/4–1/2 turn past finger tight. However, the spark
plug should be tightened to
Page:   1-8 9-16 17-24 next >