2007 VOLVO XC70 key

2007 Volvo XC70
selected track.
l See page 226 for information on caring for compact discs.
pg. 239 Audio
External CD changer (option)
External CD changer
The optional 10-CD changer is mounted in the cargo compartment. Please r\
efer to the illustration on
page 226 for the location of the buttons referred to on this page.
Turn the SOURCE knob to select the external CD changer.
To load discs into the changer:
- Slide the cover on the CD change open.
- Press the eject button on the CD changer.
- Pull the magazine out of the changer and insert the disc(s).
- Press the magazine back into the changer and slide the cover back into\
place.
If there are discs in the player when CD mode is selected, the changer w\
ill resume playing the disc and
track that were most recently played.
Selecting a disc position (number)
Use the station setting buttons 1-6 to select the disc to be played. Con\
tinue to press button 6 to select
discs 7-10.
The number of the disc and the track being played are shown in the displ\
ay.
Changing tracks
Briefly press the
keys (or the corresponding keys on the optional steering wheel keypad)\
to
skip to the previous or next track. The track number is shown in the dis\
play.
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (15 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
Fast forward/back
Press and hold down the
keys to search within a track or the entire disc. The search
continues for as long as the buttons are held in.
The corresponding keys on the optional steering wheel keypad cannot be u\
sed for fast forward/back.
Random play
This function plays the tracks on a CD in random order (shuffle).
l Select CD mode and press the RND button. RND is shown in the display as \
long as the function is
activated. Random tracks from randomly selected discs will be played.
l Press RND again to stop random play.
Scan
This function plays the first 10 seconds of each track on the CD.
l Press SCAN to start the function.
l Press SCAN or EXIT to stop the scan function and listen to an entire tra\
ck.
Scan only works on the selected disc.
pg. 240 Audio
Dolby Surround Pro Logic II - HU-850 only
Dolby Surround Pro Logic II
Dolby Surround Pro Logic II is a further development of the previous ver\
sion of the system and provides
enhanced sound quality. The improved sound is particularly apparent to p\
assengers in the rear seat.
NOTE: Dolby Surround Pro Logic II, together with a center speaker in the dash\
board, offers you a
sound experience very close to a live performance. The normal left-right\
stereo channels are divided to
left-center-right. In addition, surround sound is produced by the rear s\
peakers. This surround sound
mirrors the ambience of a concert hall.
NOTE:
l Dolby Surround Pro Logic II is optimized for CD mode.
l When listening to FM radio stations, Dolby Surround Pro Logic II functio\
ns best in areas with strong
reception. If reception is weak, selecting 2 or 3-channel stereo may pro\
vide better sound quality.
l 3 channel stereo is recommended for AM and FM broadcasts.
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (16 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
Determining if your garage door uses a rolling code
Determine, in one of the following ways, if your garage door uses a roll\
ing code system and is
manufactured after 1996:
l Refer to the garage door opener owner's manual for verification.
l If your hand-held transmitter appears to program the HomeLink® Univer\
sal Transceiver but the
programmed button does not activate the garage door, your garage door op\
ener may have a rolling code.
l Press the programmed HomeLink® button. If the garage door opener has \
the rolling code feature, the
HomeLink® indicator light flashes rapidly and then glows steadily aft\
er approximately 2 seconds.
To train a rolling code garage door opener, follow these instructions after programming the desired
transceiver button according to "Programming the transceiver." The help \
of a second person may make
training easier.
- Locate the training button on the garage door opener motor head unit. \
The location and color of the
training button may vary. If you encounter difficulty, refer to the gara\
ge door opener owner's manual or
call toll-free 1-800-355-3515 (Internet:
www.HomeLink.com).
- Press the "training" button on the garage door opener motor head unit \
until the "training" light comes
on.
- Press and release the programmed HomeLink® button. Press and releas\
e the programmed HomeLink®
button a second time to complete the training process.
Some garage door openers may require you to do this procedure a third ti\
me to complete the training.
The programmed button on your HomeLink® Universal Transceiver should \
now operate your garage
door opener. The original handheld transmitter can also be used, as desi\
red, to operate the garage door.
The remaining two HomeLink® buttons can be programmed in the same way\
. In the event of any
problems in programming the HomeLink® Universal Transceiver, call tol\
l-free 1-800-355-3515
(Internet:
www.HomeLink.com).
pg. 245 Audio
HomeLink® Universal Transceiver (option)
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used in p\
lace of your hand-held
transmitters.
To operate, the key must be turned to the "accessory" position (II) or\
the engine must be running. Press
the programmed HomeLink® button to activate the garage door, driveway\
gate, security lighting, home
security system, etc.
Your original hand-held transmitters may, of course, be used at any time\
.
Erasing programmed buttons
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (21 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
Individual buttons cannot be erased. To erase all three programmed butto\
ns:
- Turn the ignition key to the "accessory" position (II).
- Hold down the two outside buttons on the HomeLink® Universal Transc\
eiver for about 20 seconds,
until HomeLink®'s indicator light begins to flash.
- Release both buttons.
The HomeLink® buttons can be reprogrammed using the procedures descri\
bed on the previous page.
Reprogramming a single HomeLink® button
- Press and hold the desired HomeLink® button. Do not release the button until step 3 has been
completed.
- When the indicator light begins to flash slowly (after approximately \
20 seconds), position your hand-
held transmitter 2 to 5 in. (5 to 12 cm) away from the HomeLink® su\
rface.
- Press and hold the hand-held transmitter button. The HomeLink® indi\
cator light will flash first slowly,
then rapidly. When the indicator light flashes rapidly, release both but\
tons.
The previously programmed device has now been erased and the new device \
can be activated by
pressing the HomeLink® button that has just been programmed. This pro\
cedure will not affect any other
programmed HomeLink® buttons.
NOTE:
l Retain the original transmitter(s) for future programming procedures (\
e.g., if you purchase a new
vehicle).
l For your own security, erase all programmed buttons on the HomeLink® \
Universal Transceiver when
you sell your vehicle.
l Metallic sun protection films should not be used on any windows in a veh\
icle equipped with
HomeLink® Universal Transceiver. This could interfere with the transc\
eiver's function.
pg. 246 Audio
This page left intentionally blank.



Contents | Top of Page
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (22 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
K
Keylock
2, 125
Kickdown
131
L
Label information
213
Load carriers
148 -150
Locking steering wheel
126
Locking the car
114
Long distance trips
152
Low beam bulb, changing
199
Low beam headlights
57
M
Maintenance services
184
Maintenance, periodic
185
Malfunction indicator light
48
Manual transmission
129
Moonroof
70
Multifilter with air quality sensor
79
O
Occupant Weight Sensor
18
Octane rating
121
Odometer
46
Oil pressure
48
Oil quality
190
Owner maintenance
185
P
P Park
130, 132
Paint - color code
182
Park assist
153
Parking brake
48, 64
Parking light bulb, changing
200
Periodic owner-performed maintenance
185
file:///K|/ownersdocs/2007/2007_XC70/07xc70_12.htm (5 of 9)12/30/2006 \
5:51:48 PM

2007 Volvo XC70
Service 184
Service key
110
Service reminder
47
SERVICE REQUIRED
51
SERVICE URGENT
51
Shiftlock
2, 125
Side marker light, changing
202
Snow chains
170
Snow tires
170
Speedometer
46
Sport mode
133
Stability systems
139
Stability Traction Control (STC)
139
Start inhibitor (immobilizer)
110
Starting the car
125
STC
52, 139
Steel grid
104
Steering wheel lock
126
Stone chips, touching up
182
STOP ENGINE
51
Studded tires
170
Subwoofer
removing from cargo area
173
volume control
229
Subwoofer, removing
173
Sun visor
71
Supplemental Restraint System (SRS) - warning
light
47
Suspension
220
T
Tachometer
46
Temperature control
77
file:///K|/ownersdocs/2007/2007_XC70/07xc70_12.htm (7 of 9)12/30/2006 \
5:51:48 PM

2007 Volvo XC70
V
Valet key
110
Vanity mirror
89
Vanity mirror bulb, changing
204
Vehicle Event Data
184
Vehicle Identification Number (VIN)
213
Vehicle loading
167
Vehicle weights
215
VIN (Vehicle Identification Number)
213
Volvo and the environment
4
W
W - Winter
131, 133
Warning symbol in center of dashboard
47
Warranties
184
Washer fluid reservoir
189, 192
Washing the car
178
Waxing
179
Weight distribution
127
Weights
215
Windshield washer fluid reservoir
192
Windshield wipers
58
Winter/Wet driving mode
151


Contents | Top of Page
file:///K|/ownersdocs/2007/2007_XC70/07xc70_12.htm (9 of 9)12/30/2006 \
5:51:48 PM