2007 VOLVO XC70 buttons

2007 Volvo XC70
Storing stations automatically
This function automatically searches for and stores up to 10 strong AM o\
r FM stations in a separate
memory. If more than ten stations are found, the ten strongest ones are \
stored. This function is especially
useful in areas in which you are not familiar with radio stations or the\
ir frequencies.
To use the AUTO function:
- Select radio mode using the AM or FM buttons, or by turning the SOURCE\
knob.
- Start the search by pressing AUTO for more than 2 seconds.
- AUTO appears in the display and a number of stations with strong signa\
ls
pg. 233 Audio
Radio functions HU-650/HU-850
(max. 10) from the selected frequency band will be stored in the auto-\
store memory. If there are no
stations with sufficient signal strength, NO STATION is displayed.
- Press the AUTO button or the arrow keys on the optional steering wheel\
controls briefly to select the
stored stations.
When the radio is in auto-store mode, AUTO is shown in the display. AUTO\
disappears when you
return to the normal radio mode.
Return to the normal radio mode by pressing the AM, FM, or EXIT button. \
To return to the Auto-store mode, press the AUTO button briefly.
pg. 234 Audio
RBDS functions HU-650/HU-850
Radio Broadcast Data System - RBDS
This feature, which may not be available in your area, functions only wi\
th FM broadcasts. The radio in
your vehicle is equipped with an advanced system allowing information fr\
om broadcasters to be
transmitted visually, as text, together with the audio signal. This info\
rmation is then decoded by the
radio and made available for several new and unique features.
The RBDS or Radio Broadcast Data System operates in the FM band only, an\
d the information
transmitted is supplied exclusively by participating broadcasters. Volvo\
has no control over the accuracy
of the data or information.
Coverage by local broadcasters may be limited at this time, but as the t\
echnology and benefits grow, you
will find the radio in your vehicle is equipped to take advantage of thi\
s system.
PI (Program Information) Seek:
When an FM station has been stored as a preset, the radio also stores RB\
DS program information if it is
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (9 of 22)12/30/2006\
5:51:47 PM

2007 Volvo XC70
Fast forward/back
Press and hold down the
keys to search within a track or the entire disc. The search
continues for as long as the buttons are held in.
NOTE: The corresponding keys on the optional steering wheel keypad cannot be \
used for fast forward/
back.
Random play
This function plays the tracks on a CD in random order (shuffle).
l Select CD mode and press the RND button. RND is shown in the display as \
long as the function is
activated.
l Press RND again to stop random play.
Scan
This function plays the first 10 seconds of each track on the CD.
l Press SCAN to start the function.
l Press SCAN again or EXIT to stop the scan function and listen to an enti\
re track.
CD eject
Press the button (no. 11 in the illustration on
page 227) to eject the disc.
NOTE:
l For reasons of traffic safety, the ejected CD must be removed within 12 \
seconds or it will be
automatically drawn back into the slot and the CD player will resume pla\
ying the most recently selected
track.
l See page 226 for information on caring for compact discs.
pg. 238 Audio
HU-850 - internal CD changer
Starting the CD changer
The HU-850 is equipped with an internal, 6-disc CD changer.
Please refer to the illustration on
page 228 for the location of the buttons referred to on this page.
To load discs into the changer:
- Press the CD button or turn the SOURCE knob to CD.
- Select an empty position by pressing one of the preset buttons. The di\
splay shows which positions are
empty. LOAD DISC must be displayed before a disc is inserted into the pl\
ayer.
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (13 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
- Insert a disc.
If there are discs in the player when CD mode is selected, the changer w\
ill resume playing the disc and
track that were most recently played.
Selecting a disc position (number)
Use the station setting buttons 1-6 to select the disc to be played. The\
number of the disc and the track
being played are shown in the display.
Changing tracks
Briefly press the
keys (or the corresponding keys on the optional steering wheel keypad)\
to
skip to the previous or next track. The track number is shown in the dis\
play.
Fast forward/back
Press and hold down the
keys to search within a track or the entire disc. The search
continues for as long as the buttons are held in.
The corresponding keys on the optional steering wheel keypad cannot be u\
sed for fast forward/back.
Random play
This function plays the tracks on a CD in random order (shuffle).
l Select CD mode and press the RND button. RND is shown in the display as \
long as the function is
activated. Random tracks from randomly selected discs will be played.
l Press RND again to stop random play.
Scan
This function plays the first 10 seconds of each track on the CD.
l Press SCAN to start the function.
l Press SCAN again or EXIT to stop the scan function and listen to an enti\
re track.
Scan only works on the selected disc.
CD eject
This function makes it possible to eject a single disc, or to eject all \
of the discs in the changer.
l Press the eject button briefly to eject the disc that is currently playi\
ng.
l A longer press (more than two seconds) starts the process of ejecting \
all of the discs in the changer.
NOTE:
l The EJECT ALL function can only be used while the vehicle is at a stands\
till and will be cancelled if
the vehicle begins to move.
l For reasons of traffic safety, you have 12 seconds in which to remove th\
e ejected disc. After that, the
disc automatically reinserts into the player, and the CD player will res\
ume playing the most recently
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (14 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
selected track.
l See page 226 for information on caring for compact discs.
pg. 239 Audio
External CD changer (option)
External CD changer
The optional 10-CD changer is mounted in the cargo compartment. Please r\
efer to the illustration on
page 226 for the location of the buttons referred to on this page.
Turn the SOURCE knob to select the external CD changer.
To load discs into the changer:
- Slide the cover on the CD change open.
- Press the eject button on the CD changer.
- Pull the magazine out of the changer and insert the disc(s).
- Press the magazine back into the changer and slide the cover back into\
place.
If there are discs in the player when CD mode is selected, the changer w\
ill resume playing the disc and
track that were most recently played.
Selecting a disc position (number)
Use the station setting buttons 1-6 to select the disc to be played. Con\
tinue to press button 6 to select
discs 7-10.
The number of the disc and the track being played are shown in the displ\
ay.
Changing tracks
Briefly press the
keys (or the corresponding keys on the optional steering wheel keypad)\
to
skip to the previous or next track. The track number is shown in the dis\
play.
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (15 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
Fast forward/back
Press and hold down the
keys to search within a track or the entire disc. The search
continues for as long as the buttons are held in.
The corresponding keys on the optional steering wheel keypad cannot be u\
sed for fast forward/back.
Random play
This function plays the tracks on a CD in random order (shuffle).
l Select CD mode and press the RND button. RND is shown in the display as \
long as the function is
activated. Random tracks from randomly selected discs will be played.
l Press RND again to stop random play.
Scan
This function plays the first 10 seconds of each track on the CD.
l Press SCAN to start the function.
l Press SCAN or EXIT to stop the scan function and listen to an entire tra\
ck.
Scan only works on the selected disc.
pg. 240 Audio
Dolby Surround Pro Logic II - HU-850 only
Dolby Surround Pro Logic II
Dolby Surround Pro Logic II is a further development of the previous ver\
sion of the system and provides
enhanced sound quality. The improved sound is particularly apparent to p\
assengers in the rear seat.
NOTE: Dolby Surround Pro Logic II, together with a center speaker in the dash\
board, offers you a
sound experience very close to a live performance. The normal left-right\
stereo channels are divided to
left-center-right. In addition, surround sound is produced by the rear s\
peakers. This surround sound
mirrors the ambience of a concert hall.
NOTE:
l Dolby Surround Pro Logic II is optimized for CD mode.
l When listening to FM radio stations, Dolby Surround Pro Logic II functio\
ns best in areas with strong
reception. If reception is weak, selecting 2 or 3-channel stereo may pro\
vide better sound quality.
l 3 channel stereo is recommended for AM and FM broadcasts.
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (16 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
- Begin by erasing all 3 factory default channels. Hold down the two out\
side buttons (buttons 1 and 3 in
the illustration) on the HomeLink® Universal Transceiver for about 2\
0 seconds, until HomeLink®'s
indicator light begins to flash. Then release the buttons.
- Hold your hand-held transmitter (garage door opener, for example) 2 \
to 5 in. (5 to 12 cm) away from
the HomeLink® surface, keeping the indicator light in view. For place\
ment questions, contact
HomeLink® toll-free 1-800-355-3515 (Internet:
www.HomeLink.com).
- Using two hands, push and hold both your hand-held transmitter's butto\
n and the transceiver button
you wish to program.
The indicator light will flash first slowly, then rapidly. Rapid flashin\
g tells you the HomeLink® button
has been successfully programmed. Release both buttons.
- If you are programming a rolling code-equipped device (e.g., garage d\
oor opener or entry door lock),
refer to "Programming rolling codes" on the next page to complete the pr\
ogramming process.
Repeat the third and fourth steps to program the other two transceiver b\
uttons.
If, after several attempts, you are unable to successfully train the Hom\
eLink® Universal Transceiver to
learn your hand-held transmitter's signal, contact HomeLink® toll-fre\
e 1-800-355-3515 (Internet:
www.
HomeLink.com).
pg. 244 Audio
HomeLink® Universal Transceiver (option)
WARNING!
If you use HomeLink® to open a garage door or gate, be sure no one is\
near the gate or door while it
is in motion.
Do not use the HomeLink® Universal Transceiver with any garage door o\
pener that lacks safety
"stop" and "reverse" features as required by federal safety standards. (\
This includes any garage door
opener model manufactured before April 1, 1982) A garage door opener th\
at cannot "detect" an
object, signalling the door to "stop" and "reverse" does not meet curren\
t federal safety standards.
Using a garage door opener without these features increases the risk of \
serious injury or death. For
more information on this matter, call toll-free 1-800-355-3515 (Interne\
t:
www.HomeLink.com).
NOTE: Canadian residents: During programming, your hand-held transmitter may \
automatically stop
transmitting. To successfully train HomeLink®, continue to hold the H\
omeLink® button. At the same
time, repeatedly press and hold your handheld transmitter's button at tw\
o-second intervals until
HomeLink® has learned your transmitter's code. The HomeLink® indic\
ator light will flash first slowly,
and then rapidly to indicate that the button has been successfully progr\
ammed.
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (20 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
Determining if your garage door uses a rolling code
Determine, in one of the following ways, if your garage door uses a roll\
ing code system and is
manufactured after 1996:
l Refer to the garage door opener owner's manual for verification.
l If your hand-held transmitter appears to program the HomeLink® Univer\
sal Transceiver but the
programmed button does not activate the garage door, your garage door op\
ener may have a rolling code.
l Press the programmed HomeLink® button. If the garage door opener has \
the rolling code feature, the
HomeLink® indicator light flashes rapidly and then glows steadily aft\
er approximately 2 seconds.
To train a rolling code garage door opener, follow these instructions after programming the desired
transceiver button according to "Programming the transceiver." The help \
of a second person may make
training easier.
- Locate the training button on the garage door opener motor head unit. \
The location and color of the
training button may vary. If you encounter difficulty, refer to the gara\
ge door opener owner's manual or
call toll-free 1-800-355-3515 (Internet:
www.HomeLink.com).
- Press the "training" button on the garage door opener motor head unit \
until the "training" light comes
on.
- Press and release the programmed HomeLink® button. Press and releas\
e the programmed HomeLink®
button a second time to complete the training process.
Some garage door openers may require you to do this procedure a third ti\
me to complete the training.
The programmed button on your HomeLink® Universal Transceiver should \
now operate your garage
door opener. The original handheld transmitter can also be used, as desi\
red, to operate the garage door.
The remaining two HomeLink® buttons can be programmed in the same way\
. In the event of any
problems in programming the HomeLink® Universal Transceiver, call tol\
l-free 1-800-355-3515
(Internet:
www.HomeLink.com).
pg. 245 Audio
HomeLink® Universal Transceiver (option)
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used in p\
lace of your hand-held
transmitters.
To operate, the key must be turned to the "accessory" position (II) or\
the engine must be running. Press
the programmed HomeLink® button to activate the garage door, driveway\
gate, security lighting, home
security system, etc.
Your original hand-held transmitters may, of course, be used at any time\
.
Erasing programmed buttons
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (21 of 22)12/30/200\
6 5:51:47 PM

2007 Volvo XC70
Individual buttons cannot be erased. To erase all three programmed butto\
ns:
- Turn the ignition key to the "accessory" position (II).
- Hold down the two outside buttons on the HomeLink® Universal Transc\
eiver for about 20 seconds,
until HomeLink®'s indicator light begins to flash.
- Release both buttons.
The HomeLink® buttons can be reprogrammed using the procedures descri\
bed on the previous page.
Reprogramming a single HomeLink® button
- Press and hold the desired HomeLink® button. Do not release the button until step 3 has been
completed.
- When the indicator light begins to flash slowly (after approximately \
20 seconds), position your hand-
held transmitter 2 to 5 in. (5 to 12 cm) away from the HomeLink® su\
rface.
- Press and hold the hand-held transmitter button. The HomeLink® indi\
cator light will flash first slowly,
then rapidly. When the indicator light flashes rapidly, release both but\
tons.
The previously programmed device has now been erased and the new device \
can be activated by
pressing the HomeLink® button that has just been programmed. This pro\
cedure will not affect any other
programmed HomeLink® buttons.
NOTE:
l Retain the original transmitter(s) for future programming procedures (\
e.g., if you purchase a new
vehicle).
l For your own security, erase all programmed buttons on the HomeLink® \
Universal Transceiver when
you sell your vehicle.
l Metallic sun protection films should not be used on any windows in a veh\
icle equipped with
HomeLink® Universal Transceiver. This could interfere with the transc\
eiver's function.
pg. 246 Audio
This page left intentionally blank.



Contents | Top of Page
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (22 of 22)12/30/200\
6 5:51:47 PM