2007 VOLKSWAGEN GOLF PLUS bluetooth

areas with regulations to or prohibiting the use of
and
in
recharge rs may damage the
High speeds, poor weather or road tions as as the quality of the network nection can the
General information
if the phone is no t set in the
ph one in the phone to the pho n e package via Hands-Free (HFP ).
the operat ional instructions of the
int erru ptions may
occur in dead spots .
Most
devices are sh ielded against RF
( high- fre qu ency) signals. some rare cases, ever, elec tronic devices may not be shielded
against the
terference may occur.
Bluetooth technology connects a phone to
the hands-free equipment of the vehic le .
use compa tible Bluetooth devices . tion regarding compatible Blu etooth products can be obtained from the
Some phones are detected when the ign ition is swi tched on and nected. Therefore , the phone and the
tooth function of the active
Declaration of Conformity
S1nn GmbH & Co. KG herewith declares that the
UHV-High device conforms to the requ irements of the regulations of the 1999/5/EC directive. A copy
o f the
Some countries may have restrictions
authorities.
safety inst ructi ons, read of the device connected to the
Bluetooth-compatible devices.
Introduction 5

Navigation system
the event that route guidance has been started,
navigation instructions are also issued during calls.
necessary, disconnect active, i.e. automatically connected, Bluetooth connections of the mobile
phone .
Deac tivat e the key lock and screen saver of the mobi le phone .
To
Activa te Bluetooth on the mobile phone .
Connect the mob ile phone with the mobile phone package .
phone can be operated using the mobile
phone package only if a cradle is set in the mount
for the cradle . The mobi le phone to be paired must
not be in the cradle while doing so. A suitable cra-
dle is avai lable in Volkswagen accessories.
Operation

First steps
Introduction
this section
and warnings:
inst ructions 4
General information 5
Controls page 6
17
menu 22
Driver distraction can cause accidents and serious persona l
hicle is not moving.
guage -depend ent chara cters and services .
Pairing the
Read and on page 4 and the introduction and on page 12 first.
E
ach mobile phone must be initia lly paired to the
mo bile phone packag e via Bl uetooth hands-free
profile (HFP
).
Linking takes several minutes .
vehicles without the menu in the instrument cluster, perform pairing
via the mobi le phone 13 .
Applies to vehicles with a charging cradle: is not necessary to set the
phone package and
the mobile phone.
Depending on the
1: the Bluetooth connection to visible
Activate the Bluetoot h function on the mobile
phone.
Th e mobile phone is no w visible for several nutes.1> Repeat steps 1 and 2 after the time tion if no successful pairing took place.
Access ph one menu in the ins trum ent cluster
d isp lay.
Phone search to search for comp atible
B luetooth phones in the vehic le . After a
successful search , a l ist with the Bluetoot h names of
3: Pair the mobile phone
Time-limited password entry! Please finish reading
step 3 completely before carrying out next steps .
if n ecessary, activate "Wait for inco ming tooth connec tions " on the mobile phone.1
)
Have the mobile phone handy, since there is a
time limit for entry of the password .
phone from the device list in the display on the instrumen t cluster .

phone.
Enter the 4-character password, shown on th e
display of the instru ment cluster within onds in the mobile phone and confirm the
Confirm the passwo rd .
Confirm further queries on the mobile phone.
Confirm a message in the instrument cluster
tha t a user
The data stored in the phone contacts is 1 l
Now the
the mobile phone package . D epending on the
radio or naviga tion system , "shortcut buttons" can
be stored for three or four devices .
the on page 4 and the introduction and on page 12 first.
Each mobile phone must be initially paired to the
mobile phone package via Bluetooth hands-free
Linking takes several minutes.
vehicles without the menu in the instrument
cluster , perform pairing via the mobile phone.
Applies only to Vento: before pairing , set a
suitable cradle in the mount for the cradle ; see the
t ip at the end of the description of the ess.
Bluetoo th devices or adapters can be set so that they can be connected to the bil e phone package product by themse lves . To
For the device search , select a location with the likelihood of only a few unknown
a device has already been connected via
for pairing a phone .
Switch the ignition on.
phone package automatically comes visible for three minutes after it is swi tc hed as long as no other device has been connected
to the mobile phone package .
(applies only to vehicles with the ton module) : in the
three -button module 8.
The mobile phone must be paired the mobile
phone package within thre e m inutes . Bluetoo th
of the
Activate Bluetooth function on the mobile
phone .
Initiate the search for Bluetooth devices in the
mobile phone. A list of f ound devices appears.
VW .
Operatio n

Confirm the Bluetooth connection on the phone.
A message appears on the phone that a pass­
word must be entered for authoriza tion .
Enter the four-dig it password . T he factory set­
lings are an incorrect password has been entered, the this case,
repeal the pairing process.
Confirm possible phone query with Yes if thi s
Blue tooth connect ion sh ould be made without
entering a password . When the ignitio n is switched
on, the Bluetoo th connec tion is
15.
The data stored in the phone contac ts is tr ans­
ferred into the ve hicle.1
)
on page 4 and the introduction and WARN­on page 12 first.
The
The mobil e phone is coupled with a micro­
phone near the front interior light.
are broadcast over the speakers.
The playback of radio stations, COs, etc . on the
When the igniti on is sw itched on, you can use
the button on the steering wheel
The mobile phone package is active when the
ignition is on or if the ignition key is in the igni ­
tion after the ignition is switched off and the radio or switc h­
ed on.
A is transfe rred to the
The music stored in the phone can be
reproduced via a su itable radio or navigat ion sys­
tem in mobile phones that support the "Advanced
Audio Distribution
Depending on the mobile phone.
m anual
Up to fou r dev ices can be stored as known in the mobile phone package. Depending on the
radio or navigat ion system, "shortcut buttons " can
be stored for three or four devices.
anothe r
Up to
phone can be operated using the if a cradle is set in the mount
for the crad le. The phone to be paired must
not be in the while doing so. A cra-in
The charger with the outside antenna .
For charging cradles with an integrated charg­
ing function , the battery of the mobile phone charg­
es, if necessary, when the
ignition is on .
phone and the mobile phone package recognize the connection when the
igni tion is on and after the verification of th e Bluetooth connection (password entry ) 12. The
phone
manufacturer.
Create a connec tion using the phone menu in the instrument cluster 25.

Phone menu
Introduction
this section you'll find information on the follow­
ing :
Menu stru cture overv i
ew
Phone main screen menu
Phone book menu ... .
clus ter ,
t he sett ings for the mobile phone package can be
made on the phone menu
instructions
Gene ral information
on page 4 and the introduction and WARN­on page 22 first.
screen
page 12
17
Driver distraction can cause accidents and serious personal injury.
Perform settings for the mobile phone package and functions
for a paired phone. Follow the oper­
a tions manual of the
menu. The following menu items can be
accessed.
Function
sc reen
Voice mailb ox
Blu etooth
Settings Accessing
a copy
of th e pho ne book from the phone 23. The
be copied . a)
Enter ing a phone number to make a
of recently dialed, missed and rece iv e d 24. for connected phone, then the that
were conducted during the current connection through the
to to the received messages
and Bluetooth functions
26.
Depending on the mobile phone.
Phone menu structure
Main phone screen 23
Ph on e book 23
22 m anual
24
Missed
Received

24
Bluetooth 25
User
- Connect
- Disconnect
- Rename
-
New user
Media
-Active device
- Paired device
- Search
Phone name
Phone main screen menu
on
on page 22 first.
Settings
Phone bo ok
- Update
-
to a connection.
Connection to media
or a to a music-playing phone
of the phone battery does not depend on whether the phone is or not in
the charging
Showing the str ength of the
su ppo rted by m ob ile pho ne .
Phone book menu
on
on page 22 first.
The shown phone book is a copy of the phone
book of the phone .
Operation
23

Upon the initial use of the menu item, the bile phone package searches for the phone
box" or "Answe ring mach ine ".
The number for the voicemai l must be the same as in the radio or naviga tion system
and in the instrument clust er. T he number
can be changed in the ph one menu in the instru­ment cluster. The modi fied number is atso availa-
When no appropriate entry is found, th e num ber for the voicemail be dialed
on page 4 and the introduction and on
code
request might be required in the instrumen t cluste r disp lay
New user in order to start the device search for compatible Bluetooth mobile
phones . While trying to pair an "unre cognized " mobile phone, a check for four exist-
New user ing user
first. After that, the linking proce-
dure
1 5 . Corresponding ly , selec t the
and pair with the new devices in the Bluetooth accessibili-
ty area.
An individual name can be assigned to the mobi le phone package . The name
of the
Phon e name visible mobile phone package is displ ayed to other Bluetoo th devices after device
searches .
vw Phone is stored at the factory.
For privacy reasons , delete the "user in the User menu or contact a Volkswagen
dealersh ip whe n