2007 TOYOTA LAND CRUISER navigation system

xvi
LIMITATION OF LIABILITY
The price of the DATABASE does not
include any consideration for assumption
of risk of consequential, indirect or
unlimited direct damages which may
arise in connection with your use of the
DATABASE. Accordingly, in no event
shall GDT or supplier of the navigation
system using the DATABASE
(“Supplier”) be liable for any
consequential, special, incidental or
indirect damages, including without
limitation, loss of revenue, data, or use,
incurred by you or any third party arising
out of your use of the DATABASE,
whether in an action in contract or tort or
based on a warranty, even if GDT or the
Supplier has been advised of the
possibility of such damages. In any
event GDT’s liability for direct damages
is limited to the price of your copy of the
DATABASE.
THE DISCLAIMER OF WARRANTY
AND LIMITATION OF LIABILITY, SET
FORTH IN THIS AGREEMENT, DO NOT
AFFECT OR PREJUDICE YOUR
STATUTORY RIGHTS WHERE YOU
HAVE ACQUIRED THE DATABASE
OTHERWISE THAN IN THE COURSE
OF A BUSINESS. Some states and laws
do not allow the exclusion of implied
warranties, so the above disclaimer may
not apply to you.

xix
END USER NOTICE
PLEASE READ THIS NOTICE
CAREFULLY BEFORE USING THIS
NAVIGATION SYSTEM
The Point Of Interest Data (“POI” Data) in
the navigation system is in part provided
by infoUSA Inc. (“infoUSA”). By using
the POI Data, you accept and agree to all
terms and conditions set forth below.
1. Ownership
All rights, title and interest to the infoUSA
POI Data shall be retained by infoUSA.
2. Limitations on use
Except to the extent explicitly permitted
by mandatory laws, you may not extract
or re−utilize any portion of the contents of
the POI Data, nor reproduce, copy,
modify, adapt, translate, disassemble,
decompile, or reverse engineer any
portion of the POI Data.
3. Transfer
You may not transfer the POI Data to third
parties, except together with the system
for which it was created, provided that
you do not retain any copy of the POI
Data.

xxi
END USER LICENSE AGREEMENT
Personal Use Only. You agree to use this
information for solely personal,
non−commercial purposes, and not for
service bureau, time−sharing or other
similar purposes. You may not modify
the information or remove any copyright
notices that appear on the information in
any way. You may not decompile,
disassemble or reverse engineer any
portion of this information, and may not
transfer or distribute it in any form, for any
purpose. Without limiting the foregoing,
you may not use this information with any
products, systems, or applications
installed or otherwise connected to or in
communication with vehicles, capable of
vehicle navigation, positioning, dispatch,
real time route guidance, fleet
management or similar applications.

xxv There are two types of areas available for
route guidance. In one type of area, pri-
marily around metropolitan centers, de-
tailed route guidance is available for the
entire area. In the other type of area, all
roads are displayed on the map but route
guidance is limited. The navigation route
might lack precision because the data
(no right turns, oneway traffic, etc.) is
not complete. It is still possible to reach
the destination by following the arrow di-
rection and distance as shown on the
bottom left of the screen. The arrow
points in the direction of the destination.
The distance shown is as measured in a
straight line from the current vehicle
position to the destination area.
In order to provide you with as accurate map
information as possible, we are always gath-
ering information such as on road repairs
and carrying out on−site investigations.
However, the names of roads, streets, facili-
ties, and their locations are often changed.
In some places, construction on roads may
be in progress. For that reason, information
on some areas in this system might be differ-
ent from the actual location.
1U020
The map database is normally updated once
a year. Contact your dealer for updating a
map database.
To confirm the database version and
disc coverage area
1. Push the
“MENU” button.
2. Touch the “Map DVD” switch.
Make sure the version of the database on
this screen. (The database version on the
screen above may be different from the ac-
tual screen.)

xliii
(c) Selecting from a list
You can select the desired destination from
the listed POI names.
When you touch the switch of the desired
item, the screen changes and displays
the map location of the selected destina-
tion and the route preference. (See
“ —
Entering destination” on page xlviii.)
“Dist.”: To sort in the order of distance from
your current location.
“Icon”: To sort in the order of the POI icons.
“Name”: To sort in alphabetical order by
name.
“On Route”: When the indicator is illumi-
nated by touching this switch, the list of the
items searched along the route is displayed.
— Destination input by
“Emergency”
By touching the “Emergency” switch
on the “Destination” screen, the display
changes to a screen to select dealers,
hospitals or police stations. During driv-
ing, only nearby police stations, hospi-
tals or dealers are shown. The current
position is shown with an address, the
latitude and the longitude at the top of the
screen.
When you touch the desired emergency
category, the selected emergency category
list is displayed.
Touch the switch of the desired destina-
tion. The screen changes and displays
the map location of the selected destina-
tion and the route preference. (See
“ —
Entering destination” on page xlviii.)
“Dist. Sort”: To sort in the order of distance
from your current position. The distance
from your current position up to the destina-
tion is displayed on the right of the name.
“Name Sort”: To sort in alphabetical order
by name.
INFORMATION
The navigation system does not guide
in areas where route guidance is un-
available. (See page xii.)

lxxiv
Volume
You can use voice guidance when ap-
proaching a destination.
You can adjust the volume of the voice or
turn off voice guidance.
Push the “MENU” button to display the
“Menu” screen, and touch the “Vol-
ume”
switch.
To adjust the volume, select the desired level
by touching the appropriate number.
If you do not need voice guidance, touch the
“Off” switch.
The selected item is highlighted in green.
INFORMATION
During route guidance, the voice guid-
ance continues even if the navigation
screen is changed to other screens.
“Adaptive Volume Control”: If you turn the
“Adaptive Volume Control” on, the volume is
turned up automatically when the vehicle
speed exceeds 50 mph (80 km/h).
To turn the “Adaptive Volume Control”
system on, touch the switch. The indicator
will be highlighted.
User selection
The system can memorize the following
settings for up to three users.
Map direction
Map scale
Guidance mode
Setup
Volume
Language
Push the “MENU” button to display the
“Menu” screen. Then touch the
“Select
User”
switch.

lxxxix
2. Touch the “Adjust” switch of “Cal-
ibration”.
3. Touch the “Position/Direction”
switch.
INFORMATION
For additional information on the accu-
racy of a current vehicle position, see
“Limitations of the navigation system”
on page x.Position/Direction calibration
1. Touch the scroll arrows to move the
cursor to your desired location.
Touch the
“Enter” switch.

cviii
Maintenance information
This system informs you when to replace
certain parts or components and shows
dealer information (if registered) on the
screen. (See “Information items” on
page cix.) When the navigation system
begins operating after either the informa-
tion item’s preset data arrives or the
driving distance reaches a predeter-
mined setting, the “Information” screen
will be displayed. This screen will appear
every time the system is turned on until
you touch the
“Do not display this
message again”
switch.
To prevent this information screen from be-
ing displayed again, touch the
“Do not
display this message again”
switch.1. Push the
“INFO” button to display
the “Information Menu” screen and
touch the
“Maintenance” switch.
5u004
2. Touch the desired icon and input the
conditions.
Notice of “Date”: You can input the next
maintenance date.
Notice of “Distance”: You can input the
driving distance until the next maintenance
check.
When you touch the
switch on the
“Maintenance” screen, the screen changes
to the “Personal Event” screen. Touch the
keys to input the desired name and then in-
put conditions.
After you input the date and/or distance,
touch the
“OK” switch. The screen then
returns to the “Maintenance” screen.
The following switches appear.
“Delete All”: To cancel all conditions which
have been inputted.