2007 TOYOTA CAMRY bluetooth

11 3
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see “(b)
Registering the speed tone” on page 115.)
1. Touch “Speed Tone”.
2. Touch the desired switch to send a
tone.
— Change the settings of the
Bluetooth phone
Touch “Settings” to display “Settings”
screen.
You can change the settings of the phone.(a) Registering the speed dial
You can register the desired telephone
number from phone book, dialed numbers
and received calls. Up to 17 speed dial
numbers can be registered.
The 6th entry is the speed dial for redialing.
1. Touch “Speed Dial” to display the
“Speed Dial Settings” screen.
2. Touch “Register” of “Speed Dial”.

120
Incoming call display
You can select the method of the receiving
call display.
Touch “Full” or “Icon”.
“Full” mode When a call is received,. . . . .
the Hands−free screen is
displayed and you can
operate it on the screen.
“Icon” mode The message is displayed . . . . .
on the upper side of the
screen. You can only op-
erate the steering switch.
Auto answer
When a call is received, the display auto-
matically changes to the talking screen
and you can start to talk on the phone
(without touching any button) after the
preset time.
Touch “ON” of “Auto Answer” and “” or
“+” to adjust the waiting time of auto an-
swer within 1 60 seconds.
The Bluetooth connection status at
startup
When the ignition switch is set at ACC or
ON and the Bluetooth is automatically
connected, the connection check is dis-
played.
Touch “ON” or “OFF” of “Show Bluetooth
connection status at start up”.

121
Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “Yes”.(e) Setting the phone book
You can register phone numbers in the
phone book.
Touch “Phone Book” to display the
“Phone Book Management” screen.
You can do the detail settings of phone
book.
Transferring a telephone number
You can transfer the telephone numbers in
your Bluetooth phone to the system. Up to
1000 person’s data (up to 2 numbers a per-
son) can be registered in the phone book.
Transfer it while the engine is running.
1. Touch “Transfer” to display the “Select
Group” screen.

122
2. Select the group you want to transfer
the data to.
3. Touch “Overwrite” or “Add To”.
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel”. If the transferring
is interrupted on the way, the phone book data
transferred until then can be memorized in the
system.5. When this screen is displayed, the
transfer is completed.
When this screen is displayed, try the
transfer operation again.

135
Initializing the security code
You can initialize the settings.
1. Touch “Default”.
2. Input the security code and touch
“OK”.
3. Touch “Yes”.
— Set a Bluetooth phone
Selecting a Bluetooth phone
In case you register more than one Blue-
tooth phone, you need to choose a favor-
ite one.
1. Touch “Settings” to display the “Set-
tings” screen.
2. Touch “Select Telephone” to display
the “Select Telephone” screen.

136 You can select the Bluetooth phone from
a maximum of 6 numbers.
“Empty” is displayed when you have not reg-
istered a Bluetooth phone yet.
Bluetooth mark is displayed when you
choose the phone.
Although you can register up to 6 Bluetooth
phones in the system, only one Bluetooth
phone can function at a time.
3. Touch “OK”.
When the result message is displayed, you
can use the Bluetooth phone.
When another Bluetooth phone is trying to
connect, this screen is displayed.
Touch “Yes” or “No”.
Displaying Bluetooth information
You can see or set the information of the
Bluetooth phone on the system.
“Device Name”
The name of Bluetooth phone . . . .
which is displayed on the screen.
You can change it into a desired
name.
“Bluetooth Device Address”
The address peculiar to the sys- . . . .
tem. You cannot change it.
1. Select the desired phone and touch
“Information”.

137
2. Touch “Change”.
3. When you complete the setting, touch
.
Changing a device name
You can change a device name. If you
change a device name, the name regis-
tered in your cellular phone is not
changed.
1. Touch “Change”.
2. Use the software keyboard to input the
device name.
Changing the Bluetooth settings
You can change the display and settings of
Bluetooth information on the system.
The information displays the following items.
“Device Name”
The name in the Bluetooth net- . . . .
work. You can change it.
“Passkey”
The password when you register . . . .
your cellular phone in the system.
You can change it into the figure of
4−8 digits.
“Bluetooth Device Address”
The address peculiar to the sys- . . . .
tem. You can not change it. If you
have registered two Bluetooth
phones with the same Device
Name or Passkey and you cannot
distinguish one from the other, re-
fer to it.
When you change the device name or
Passkey, do the followings.

138
1. Touch “Bluetooth”.
2. Touch “Change” of “Device Name” or
“Passkey”.
3. Use the software keyboard to input the
device name.
You can input up to 20 characters.
4. Input a Passkey with 4 8 digits.
When you touch , the input number is de-
leted.
5. When you complete the setting, touch
.