2007 SUZUKI ALTO Temperature of engine

Downloaded from www.Manualslib.com manuals search engine 16
76G-74E
3-3
CAUTION
In case of attaching any metal objects
to the immobilizer key, it may not
start the engine.
The immobilizer key is a sensitive
electronic instrument. To avoid
damaging the immobilizer key:
Do not expose it to impacts,
moisture or high temperature such
as by leaving it on the dashboard
under direct sunlight.
Keep the immobilizer key away from
magnetic objects.
If the Immobilizer system light (1) blinks
when the ignition switch is in the “ON”
position, there may be something wrong
with your key or with the immobilizer sys-
tem. Contact your MARUTI SUZUKI dealer
to inspect the system.
Ignition Key Reminder (if equipped)
A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver's doors is
opened.
BEFORE DRIVING
NOTE:
If you lose your Immobilizer ignition key,
contact your MARUTI SUZUKI dealer as
soon as possible to have the lost one
deactivated, then have the new key
made by them.
If you own other vehicles with
immobilizer keys, keep those keys away
from the ignition switch when using your
vehicle, or the engine may not be
started because they may interfere with
your vehicle’s immobilizer system.
76G-03-00376G-03-004

Downloaded from www.Manualslib.com manuals search engine 3576G-74E
STEERING COLUMN CONTROLS
HORN
To prevent damage to the windscreen
wiper and washer system components,
you should take the following
precautions:
Do not continue to hold in the lever
when there is no windscreen washer
fluid being sprayed or the washer
motor can be damaged.
Do not attempt to remove dirt from
a dry windscreen with the wipers or
you can damage the windscreen and
the wiper blades. Always wet the
windscreen with washer fluid before
operating the wipers.
Clear ice or packed snow from the
wiper blades before using the
wipers.
Check the washer fluid level
regularly. Check it often when the
weather is bad.
Only fill the washer fluid reservoir
3/4 full during cold weather to allow
room for expansion if the
temperature falls low enough to
freeze the solution.Press the horn button of the steering wheel
to sound the horn. The horn will sound with
the ignition switch in any position.
CAUTION
4-6
76G-04-012
Windscreen Washer
To spray windscreen washer fluid, pull the
lever toward you. The windscreen wipers
will automatically turn on at low speed if
they are not already on and the "INT"
position is equipped.
To prevent windscreen icing in cold
weather, turn on the defroster to heat
the windscreen before and during
windscreen washer use.
Do not use radiator antifreeze in the
windscreen washer reservoir. It can
severely impair visibility when
sprayed on the windscreen, and can
also damage your vehicle’s paint.
w ww w
w WARNING
76G-04-011
EXAMPLE

Downloaded from www.Manualslib.com manuals search engine 3776G-74E
5
INSTRUMENT PANEL
INSTRUMENT PANEL
Instrument Panel................................................................................................ 5-1
Instrument Cluster............................................................................................. 5-2
Warning and Indicator Lights......................................................................... 5-4
Speedometer........................................................................................................ 5-7
Odometer/Tripmeter............................................................................................ 5-8
Tachometer (if equipped)................................................................................. 5-9
Fuel Gauge.......................................................................................................... 5-9
High Engine Coolant Temperature Warning Light (Red Color).............. 5-9
Glove Box..........................................................................................................5-10
Head Light Leveling Switch..........................................................................5-10
Heating System (if equipped)........................................................................5-11
System Operating Instructions......................................................................5-12
Air Conditioning System (if equipped).......................................................5-17
System Operating Instructions......................................................................5-17

Downloaded from www.Manualslib.com manuals search engine 3976G-74E
INSTRUMENT PANEL
1Speedometer
2Odometer/Trip meter
3Odometer/Trip meter selector knob
4Fuel gauge
5High Temperature Coolant warning lamp
6Warning and indicator lights
5-2
INSTRUMENT CLUSTER (ALTO)
76G-05-003

Downloaded from www.Manualslib.com manuals search engine 40
76G-74E
1Speedometer
2Odometer/Trip meter
3Odometer/Trip meter selector knob
4Tachometer (if equipped)
5Fuel gauge
6High Temperature Coolant warning lamp
7Warning and indicator lights
INSTRUMENT CLUSTER (ALTO K10)
76G-05-004
76G-05-004A
TYPE-2 TYPE-1INSTRUMENT PANEL5-3

Downloaded from www.Manualslib.com manuals search engine 46
76G-74E
INSTRUMENT PANEL5-9
HIGH ENGINE COOLANT
TEMPERATURE WARNING
LIGHT (Red Color)When the ignition switch is turned to the
“ON” position, this light comes on briefly so
you can check that the light is working. If
this light blinks while driving, it means the
engine is running hot. Avoid driving condi-
tions that may lead to actual overheating.
If the light stays on without blinking, then
the engine is overheating. Follow the in-
structions in the “If the Engine Over heats”
of “EMERGENCY SERVICE” section.
Continuing to drive the vehicle when
engine overheating is indicated can
result in severe engine damage.
CAUTION
76G-05-019
FUEL GAUGEWhen the ignition switch is in the “ON”
position, this gauge gives an approximate
indication of the amount of fuel in the fuel
tank. “F” stands for full and “E” stands for
empty.
When the fuel meter indicator shows only
one segment to “E”, refill the tank as soon
as possible.Note:
If the last segment blinks, it means that the
fuel tank is almost empty.
Note:
The fuel level indicator varies depending on
road conditions (for example, slope or
curve) and driving conditions because of
fuel moving in the tank.
76G-05-018
The tachometer indicates engine speed
in revolutions per minute.
76G-05-013C
Never drive with the engine speed in-
dicator in the red zone (1) or severe
engine damage can result.
When downshifting to a lower gear,
make sure not to operate with exces-
sive revolution speeds of the engine.
Refer to “Downshifting maximum allow-
able speeds” in the “OPERATING
YOUR VEHICLE” section.
CAUTION
TACHOMETER (if equipped)

Downloaded from www.Manualslib.com manuals search engine 4976G-74E
INSTRUMENT PANEL
Description of Controls (if equipped)
Function Lever/Knob 1: This lever/knob is
used to select one of the functions
described below:
VENTILATION 2: Temperature-
controlled air comes out of the
center and side air outlets.
BI-LEVEL 3: Temperature-
controlled air comes out of the
floor outlets and cooler air comes
out of the center and side outlets.
When the temperature control
lever is in the fully “COOL”
position or fully “HOT” position,
however, the air from the floor
outlets and the air from the center
and side outlets will be the same
temperature.
HEAT 4: Temperature-controlled
air comes out of the floor outlets.
HEAT & DEFROST 5: Temp-
erature-controlled air comes out of
the floor outlets, the windscreen
defroster outlets, and the side
defroster outlets.DEFROST 6: Temperature-
controlled air comes out of the
windscreen defroster outlets and
the side defroster outlets.
Air Intake Lever/Knob 7: This lever/knob
is used to select between circulating outside
air (FRESH AIR) or recirculating inside air
(RECIRCULATED AIR).
Temperature Control Lever/Knob 8:
(if equipped) This lever /knob is used to
control the temperature of the air that
comes out of the air outlets.
Fan switch 9: This switch is used to turn
on the fan and to select fan speed. Fan
switch has different speed options:-
For Type-1 (Alto)
Four positions-OFF, LOW, MEDIUM and
HIGH.
For Type-2 (Alto / Alto K10)
Five Positions-OFF, LOW, MEDIUM LOW,
MEDIUM HIGH and HIGH.
SYSTEM OPERATING INSTRUCTIONS
5-12
76G-05-032 76G-05-031
76G-05-027
76G-05-028
76G-05-029
76G-05-030
76G-05-033
TYPE-1 (ALTO)
TYPE-2 (ALTO / ALTO K10)

Downloaded from www.Manualslib.com manuals search engine 50
76G-74E
Natural Ventilation
Move the function lever/knob to
"VENTILATION" and the air intake lever to
“FRESH AIR”, the temperature control
lever/knob to the desired temperature
position, and the fan switch to “OFF”. Fresh
air will flow through the vehicle when it is
moving.
Forced Ventilation
The lever/knob settings are the same as for
natural ventilation except you move the fan
switch to a position other than “OFF”.
5-13INSTRUMENT PANEL
76G-05-034
76G-05-035
TYPE-1 (ALTO)
TYPE-2 (ALTO/ALTO K10)