2007 SKODA SUPERB length

GB
3
Brief outline of operation
Push / turning knob
- Turning on and off (press). . . . . . 5
- Volume control (turn) . . . . . . . . . 5
- More setting functions in diverse menus
AUD
- Sound setting for treble and bass. . . . . . . . . . . . . . 5
GEOmetry
- Sound tone (balance, fader) . . . . 5
A/F - AM/FM band change . . . . . . . . . 6
- Memory range switching . . . . . . . 7
TP
- Radio traffic service . . . . . . . . . 6,9
- Calling up the set-up menu . . . . 12 Rocker button
- Station scan up/down . . . . . . . . . 7
- Menu up/down . . . . . . . . . . . . . 12
- CD control . . . . . . . . . . . . . . . . 10
1....6
- Radio station buttons . . . . . . . . 7
- CD changer control . . . . . . . . . 11
AS
- Automatic store . . . . . . . . . . . . . 7
SCN
- Wavelength range scan . . . . . . . 8
- CD scan . . . . . . . . . . . . . . . 10,11
Flashing LED
. . . . . . . . . . . 13, 17
CD Shaft . . . . . . . . . . . . . . . . . . 10
CD
- CD operation/CD ejection . . . . . 11 AIM
- TIM (Traffic Information Memory) 8
Anti-theft security
. . . . . . . . 4,17
Display indications:
TP: Traffic program stations set 6
FM1 VHF memory locations 1-6 . 6
FM2 VHF memory locations 7-12. 6
AM1 LW /MW
Memory locations 1-6 . . . . . . . . . 6
AM2 LW /MW Memory locations 7-12 . . . . . . . . 6
Radio traffic service range
Memory locations 1-6 . . . . . . . . . 6
Station numbers . . . . . . . . . . . . 7
Item Function Page
Item Function Page
Item Function Page









 

 \b

20
21
21
21
21
21
22

GB
Radio operation
Program selection Storing
7
with the station button
• Press a station button briefly to set the
stored frequency. The selected station is
shown in the display .
Search
• Press the rocker button 

or 
to start the search in the selected direc-
tion.
The appliance now seeks the next sta-
tion with reception in the set range, FM,
AM or TP. Only TP stations are set in
the TP range.
Manual tuning
• Press the rocker button  ▲or ▼ .
If the button is pressed briefly, the set
frequency is shown. If the button is
depressed for longer, the frequency of
the selected direction is changed accor-
dingly upwards or downwards until you
release the button again.
Scan
• By pressing the SCNbutton , all sta-
tions in the range just set are played
briefly one after the other.
If the button is pressed again, this func-
tion ends and the current program
remains set.
Storing
A maximum of 30 programs can be set
with six station buttons in the respective
wavelength ranges:
AM1 + AM2 range =12 programs
FM1 + FM2 range =12 programs
TP range = 6 programs
Stored programs can be called up by
briefly pressing the respective station but-
ton.
Manual storing
• When the required station button is
depressed for a few moments, the pro-
gram just set is stored in the respective
program location in the set range AM1,
AM2, FM1, FM2 or TP. If you have activated "Beep” in the set-up menu, the
storing process is acoustically con-
firmed. This stored program can now be
called up again and again by pressing
the respective station button
.
Automatic storing
(only applies to the ranges FM2,
AM2, TP)
• By pressing the
ASbutton , the auto-
matic storing function is started. In this
process the six programs with the clear-
est reception in the selected ranges
FM2, TP or AM2 are automatically
stored. The function is indicated in the
display by STORE.
4321
FM1 4
TP
SYMPHONY
TP
SCANAS
65
2122
6
897

Radio operation
TIM Function
(Traffic Information Memory)
With the TIM Function, up to nine traffic
announcements with a total length of a
maximum 4 minutes are automatically
stored by means of a built-in memory.
The recording is automatic if the set pro-
gram transmits traffic broadcasts (recognisa-
ble by the indication "TP"  in the display).
Standby Recording
Standby recordings take place when the
appliance is switched OFF for a limited
time.
These recordings are deleted 6 hours after
the time has run down. Switching on the
appliance ends the readiness to record. 2-hour recording
If the TP range was selected before the
appliance was switched off, all following
traffic announcements are recorded auto-
matically in the next two hours. This is brief-
ly indicated in the display by the message
"
TIM2 h
".
Recording for 24 hours
By pressing the AIM button when the
appliance is switched off, a 24-hour record-
ing mode is activated. The last heard pro-
gram and "
TIM24 h" are briefly indicated in
the display. If the last heard program was
not a TP program, a TP program is set
automatically.
Information:
• If the memory is full, the next report is recorded over the first recorded report.
• If a traffic report is longer than four min- utes, it starts to record over the beginning
of the report recording.
• If the radio is switched on during the recording of a report, the recording is
stopped. T
raffic announcements played back
chronologically
When the AIM button is pressed, the
most recent report is played back. The
recording number and the time of the re-
spective report are shown in the display, for
example "
TIM3 15:05". In this way all stored
reports are played back one after another.
By pressing the AIM button again, the
appliance is switched back to the original
state.
Repeating the traffic report
If the rocker button is pressed once
during the TIM playback, the current traffic
report is repeated.
T raffic announcements played back in
any sequence
Press the rocker button  briefly twice
during the TIM playback. Now by pressing
the rocker button  or  you can switch
up and down between the recorded reports.
Fast forward and backward winding
Keep the rocker button  or


depressed until the required point is found
in the report.
8
AUDIOGEO
1MUSIC SYSTEM 303
FM1 4
TP
13
20

CD operation
CD Changer operation Title selection
• CDs should not be exposed to tempera-tures over 50 °C for lengthy times.
Remember that temperatures inside the
vehicle in sunshine can be much higher
than outside the vehicle. For this reason
avoid exposing CDs to direct solar radia-
tion.
CD Changer operation (optional)
In addition to the integrated CD drive there is
also the possibility of operating an external
SKODA CD changer with your CD radio.
Prerequisite for the CD changer operation is
that there is a magazine filled with CDs in the
CD changer. See the enclosed CD changer
manual for the necessary operating steps.
The following functions are available for your
CD changer:
Playback
Press the CD button . The appliance now
plays the CD last heard. Playback is indica-
ted in the display by
PLAYCD x TR y (x =CD
number in the CD changer, y =track number).
CD Selection
By pressing a station button, one to six  ,
the corresponding CD will be played back
again. The CD in the integrated CD drive is
selected by pressing the CD button .
Title selection
Pressing the rocker button  or  moves
forwards or backwards to the next title.
Fast forward and reverse
This function makes it possible for you, by
listening in to the fast forwards and reverse,
to search for a particular point in a song.
Keep the rocker button 

or 
depressed until the respective point is found.
Scan
By pressing the SCN button , all titles in
the CD are played for ca. 10 sec. one after
another. The function is indicated in the dis-
play by
SCANCD TR y. By pressing the SCN
button
again, the CD changer returns to
normal operation
Shuffle (random generator)
By pressing the button AS\b, the titles of the
CD are played in random sequence. The
function is indicated in the display by
SHFFL
CDxTR y. Depending on the setting in the
set-up menu, the shuffle function refers to the
current CD only or to all CDs in the maga-
zine. When the AS button
\bis pressed
again, the CD player returns to normal
operation. Switching over to radio operation
By pressing the A/F
or TP
button, you
switch to radio operation.
Other display reports in CD Operation:
NODISC:
No CD magazine or empty CD magazine
in the CD changer.
CDX NO DISC:
No CD in the selected CD compartment x.
CHKMAGAZINE:
CD changer is checking the CD magazine
and is not ready for operation yet. Playback
is automatic when the checking procedure is
over.
NOCD MAGAZINE:
There is no CD magazine in the CD changer.
11
GB

Brief technical description
Brief technical description
General
Connections
Active antenna, mobile telephone, CD
changer, external final stage
Displays
Wavelength range, station name, fre-
quency, station button, Traffic Program
(TP), CD title number display
Illumination
Operating elements and display are illu-
minated without glare when the vehicle
illumination is switched on (night design).
The degree of brightness is adjustable
with the instrument illumination.
Theft protection
Electronic barrier in the appliance. If the
appliance is fitted into another vehicle, it
can only operate if the right code number
is entered.
Interference suppression
Specifically co-ordinated interference
suppression removes to a large extent all
interfering pulses from the engine and
from other parts in the electrical system,
e.g. heating fans, windscreen wipers,
cooling ventilators etc
Radio
Reception ranges
FM (UKW/VHF),AM, MW and LW,
Program selection
Automatic broadcast of the program set
before turning off (Last Station Memory)
in radio operation.
Six station buttons in each case for AM1,
AM2, FM1, FM2 and TP. Manual adjust-
ment up and down, PLL Tuning (PLL =
Phase-Locked Loop).
After switching on the radio, the last
received program is set again (Last
Station Memory.
Radio traffic service unit
Automatic station scan
Automatic announcements
TIM (recording of traffic announcements),
TIM standby mode for 2 or 24 hours.
CD drive and CD changer control
T itle selection, random playback, auto-
matic stop and radio switchover with traf-
fic announcements, CD selection in the
changer operation.
Audio
maximum output power
4 x 20 watts
Playback
Stereo (radio and CD), active sound
regulation, loudness, fader integrated in
the radio.
Alterations and misprints excepted.
May not be reprinted, copied or transla-
ted without Skoda’s prior authorisation.
19
GB