Manual tuning
Automatic tuning - SEEK You can set the frequency of a requested
station by pressing button or . The
frequency keeps changing when you keep
button or pressed. Release the button
to stop tuning. The display will show the set
frequency.
You can skip to the next available station in the
currently selected band by pressing buttonor The tuner will automatically stop
when the next station is found in the desired
direction.
6
7
6
Storing the stations to presets
Recalling the presets
Automatic tuning and storing of stations
AS
STORING
Use buttons or to tune the station you want
to store. Press and hold (for approx. 2s)
selected preset button to memorise the
station. (The sound volume is lowered
temporarily and a beep sounds; then the
station is stored.) You can use6x6pr
esets.
Having stored the stations using the preset
buttons , you can press any of the buttons
briefly to recall the respective station.
The automatic tuning and storage system seeks
all stations within a selected band, selects 6
stations with the strongest signal, and stores
them as presets. Press (AutoStore) button
to start the process. The display shows a
message and the sound is muted
(see picture). 67
12
4
12
12If you select the band, memory
layer will include 6 stations with the strongest
signal in the FM band. As soon as the process is
complete, the FM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
If you select the band, memory
layer will include 6 stations with the strongest
signal in the AM band. As soon as the process is
complete, the AM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
Each use of the function updates and
rewrites the presets in the currently selected
band (FM- AS or AM- AS). FM FM- AS
1
AM AM- AS 1
AS
12
12
Tuning and Storing the Stations
5
Operation of the Radio
GB
ILLUMILLUM 1
2
AC*
AC
ON
AUX AUX ON AUX OFF
BACK
Press preset button to set if you
want the radio backlight switched off when the
headlights are off. If you set , the volume knob
ring will be illuminated whenever the ignition is
on.
If your car is fitted with CLIMATRONIC unit, the
display of your radio will display any manual
change of the settings. This you can check
whether the change you performed was
accepted by the unit. If you want this
confirmation, press preset button and
set to .
Note: the display is only a setting aid. The radio
has no effect on climate unit control, and the
climate unit cannot be controlled from the
radio.
Your radio has an external input allowing
playback from other audio sources. The input is
active, if . If , the input is
deactivated.
Press preset button
to return to
previous menu level.
The display clears after 10s of inactivity. 12
12
12 If you have external amplifier connected, your
radio can be used to select sound effects
suitable to particular programs you listen to.
Press button to view a display with
available sound effects. External amplifier has
6 implemented sound effect, divided into the
following menus:
Standard linear frequency response,suitable for all types of music or
speech.
A sound effect which boosts the speech and reduces other sounds,
thus improving the clarity of speech.
A sound effect most appropriate for rock music.
To move to other display with available sound effects.
LINEAR
SPEECH
ROCK
8
Ext. Amplifier control*
14
PHONE
PHONE
ON OFF
TIME TIME ON/OFF
TEMP TEMP ON/OFF
If your car is fitted with a handsfree set, the
radio can be muted automatically during
incoming or outgoing call. Activate this
function by pressing preset button
. When is set, incoming calls will have
no effect on the radio.
Press preset button to switch
on/off the time display on the display of your
radio.
Press preset button to
switch on/off the exterior temperature display
on the display of your radio.
Another push of the preset button
displays the last level of special features
settings:
12
12 12 12
User Settings
