General programme for Inspection Services
12•
Poly-V belt: Check condition.
•
Poly-V belt: Check tension (only engines without autom atic tension
device).
•
Cooling system: Check the levels of the coolant and anti -freeze.
•
Engine and engine compartment components: Check for leaks and
damage (from above).
•
Engine and components in engine compartment, gea rbox and steering
knuckles: Check for leaks and damage (from above).
•
Engine oil and oil filter: Replace.
•
Test drive: Check brake operation, handbrake, gearbo x operation,
steering system operation, kick-down (for autom atic gearbox), air condi-
tioning and sliding roof.
•
Interior and glove compartment lighting , cigarette lighter, warning lights
and horn: Check operation.
•
Tyres, including the spare wheel: Check surface, tread and tyre pr essure.
•
Headlights: Check adjustment.
•
Windscreen wiper and headlight wiper system: Check
operation and look
for possible damage, fill if necessary.
•
Sliding roof: Check operation, clean guttering and lubricate guides.
•
Service interval indicator on the instrument panel: Re set.
•
Door and tailgate hinges: Lubricate.
•
Underbody protection: Check for damage
•
Power steering: Check oil level.
Additional workIn addition to the Inspection Service, additional maintenance jobs may have
to be carried out, depending on the conditions in wh ich your vehicle is used
and on the equipment carried. This addi tional work should be carried out in
accordance with time/distance travelled to ensure your vehicle remains reli-
able. Your Service Centre will provide detailed in formation about the addi-
tional work that may be necessary. This can be done independently of the
obligatory services, taking into account the notes i n the Maintenance
Programme (or the label: Next service). Your SEAT Service Centre will be
happy to advise you and quote the prices for this additi onal work. Additional
jobs completed are marked on the workshop sheet with the receipt.Every 7,500 km (5,000 miles)•
Engine oil and oil filter: Replace (only engines using high sulphur content
diesel fuel).
Every 30,000 km (20,000 miles)•
Air filter: Clean the housing and replace the filter element (Ibiz a Cupra
only).
•
Fuel filter: Drain.
•
Fuel filter: Replacement (only diesel engines using biodi esel, or using fuel
that does not comply with the DIN EN 590 standard)
•
Dust and pollen filter for the passenger compartment : Replace.
•
Manual gearbox: Check the oil level (only in the case of permeability).
PM ibi cor_ingles Seite 12 Mittwoch, 21. März 2007 5:22 17
