2007 Seat Cordoba roof

General programme for Inspection Services
12•
Poly-V belt: Check condition.
•
Poly-V belt: Check tension (only engines without autom atic tension
device).
•
Cooling system: Check the levels of the coolant and anti -freeze.
•
Engine and engine compartment components: Check for leaks and
damage (from above).
•
Engine and components in engine compartment, gea rbox and steering
knuckles: Check for leaks and damage (from above).
•
Engine oil and oil filter: Replace.
•
Test drive: Check brake operation, handbrake, gearbo x operation,
steering system operation, kick-down (for autom atic gearbox), air condi-
tioning and sliding roof.
•
Interior and glove compartment lighting , cigarette lighter, warning lights
and horn: Check operation.
•
Tyres, including the spare wheel: Check surface, tread and tyre pr essure.
•
Headlights: Check adjustment.
•
Windscreen wiper and headlight wiper system: Check
operation and look
for possible damage, fill if necessary.
•
Sliding roof: Check operation, clean guttering and lubricate guides.
•
Service interval indicator on the instrument panel: Re set.
•
Door and tailgate hinges: Lubricate.
•
Underbody protection: Check for damage
•
Power steering: Check oil level.
Additional workIn addition to the Inspection Service, additional maintenance jobs may have
to be carried out, depending on the conditions in wh ich your vehicle is used
and on the equipment carried. This addi tional work should be carried out in
accordance with time/distance travelled to ensure your vehicle remains reli-
able. Your Service Centre will provide detailed in formation about the addi-
tional work that may be necessary. This can be done independently of the
obligatory services, taking into account the notes i n the Maintenance
Programme (or the label: Next service). Your SEAT Service Centre will be
happy to advise you and quote the prices for this additi onal work. Additional
jobs completed are marked on the workshop sheet with the receipt.Every 7,500 km (5,000 miles)•
Engine oil and oil filter: Replace (only engines using high sulphur content
diesel fuel).
Every 30,000 km (20,000 miles)•
Air filter: Clean the housing and replace the filter element (Ibiz a Cupra
only).
•
Fuel filter: Drain.
•
Fuel filter: Replacement (only diesel engines using biodi esel, or using fuel
that does not comply with the DIN EN 590 standard)
•
Dust and pollen filter for the passenger compartment : Replace.
•
Manual gearbox: Check the oil level (only in the case of permeability).
PM ibi cor_ingles Seite 12 Mittwoch, 21. März 2007 5:22 17

Other services available15
Other services availableLegal Inspection ServiceThe legal inspections must be carried out at the intervals
prescribed.Many countries have legal requirements obliging owner s to have their vehicle
tested at specified intervals for safety for the user a nd for other traffic, as well
as ensuring that vehicle exhaust emissions meet the c ountries' regulations.
These revisions must be overseen by officially certifi ed centres.
Your Authorised Service Centre can inform you about the in spections required
by law, and can check your vehicle in the course of an In spection Service. This
will save you both time and money.
The Authorised Service Centre can also carry out the insp ections required by
law at the client's request.
Even if you do not wish to take advantage of this service and dec ide to take
your car to an officially certified centre for this check, we re commend that you
speak to the person in charge of your Authorised Service Centre first.
This person will be able to inform you of any points that require attention so
that your car does not fail the test and have to be re-teste d.Approved spare partsAll parts of your vehicle have been approved by SEAT, especially those parts
on which your safety depends. For this reason, the parts used in the
Programmed Inspection Services or in any vehicle repair must correspond
exactly to the manufacturer-defined r equirements. The approved SEAT spare parts have been designed especially for your vehicle. For thi
s reason, we
recommend that Genuine approved SEAT spares are alw ays used.
In the Authorised SEAT Service Centres you will fi nd the most important
approved spare parts. If in an exceptional case, the necess ary parts are not in
stock, they can, in general, be obtained swiftly.
The SEAT Service Centres in the EU provide a 24 month warranty
1) for
Approved Spare parts from the date they are fitted or sold. It is therefore
advisable to retain the original invoice from the Au thorised Service Centre as
proof of the existing warranty.
More information about this may be obtained from yo ur Authorised Service
Centre.
Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to th e manufacturer’s
requirements, constitute an additional service at y our disposal, offering you
the possibility to update entire assemblies, the most common being: the
short engine block, gearboxes, cylinder heads, contro l units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same SEAT appro ved spare parts warranty.
However, these parts are considerably cheaper as they are f actory-recondi-
tioned used parts. Keep the invoice for the approved S EAT exchange parts as
proof of the start of the existing warranty.1)The warranty is not available for all export mark ets. For more information, please ask
your Authorised SEAT Service Centre.
PM ibi cor_ingles Seite 15 Mittwoch, 21. März 2007 5:22 17

Other services available
16More information about this may be obtained at the A uthorised Service
Centre.Approved accessoriesWe recommend that you use only genuine SEAT accessories
and accessories approved by SEAT.If you wish to equip your car with accessories, you sho uld remember the
following points:
We recommend that you use only genuine SEAT and SEA T approved accesso-
ries.
SEAT provides a warranty for SEAT accessories valid from th e date of purchase
or fitting. It is therefore advisable to retain the original invoice from the
Authorised Service Centre as proof of the existing wa rranty.
More information about this may be obtained from your Au thorised Service
Centre.
The accessories service also offers you expert ad vice and, if required, fitting
by a specialist.
In addition, Authorised Service Centres can supply c ar care products and
parts subject to normal wear, such as tyres, batte ries and light bulbs.Paintwork and body serviceSEAT vehicles are designed in such a way that, in case of bodywork damage,
there is only need to replace and paint the parts th at have been really
affected. Both operations must be carried out according to the req
uirements of the
manufacturer; this is an essential cond ition for conservation of the bodywork
and paintwork warranties.
PM ibi cor_ingles Seite 16 Mittwoch, 21. März 2007 5:22 17

Warranty
18However, these parts are considerably cheaper as they are f actory-recondi-
tioned used parts. Keep the invoice for the approved SEAT exchange parts as
proof of the start of the existing warranty.
More information about this may be obtained a t the Authorised Service
Centre.Approved accessoriesWe recommend that you use only genuine SEAT accessories
and accessories approved by SEAT.If you wish to equip your car with accessories, you sho uld remember the
following points:
We recommend that you use only genuine SEAT and SEA T approved accesso-
ries.
SEAT provides a warranty for SEAT accessories valid from th e date of purchase
or fitting. It is therefore advisable to retain the original invoice from the
Authorised Service Centre as proof of the existing w arranty.
More information about this may be obtained from yo ur Authorised Service
Centre.
The accessories service also offers you expert ad vice and, if required, fitting
by a specialist.
In addition, Authorised Service Centres can supply car care p roducts and
parts subject to normal wear, such as tyres, batte ries and light bulbs.
Paintwork and body serviceSEAT vehicles are designed in such a way that, in case of bodywork damage,
there is only need to replace and paint the parts that have been really
affected.
Both operations must be carried out according to the requirements of the
manufacturer; this is an essential cond ition for conservation of the bodywork
and paintwork warranties.
PM ibi cor_ingles Seite 18 Mittwoch, 21. März 2007 5:22 17