Page 9 of 406
Power Seats
In vehicles with power seats, the controls used to
operate them are located on the outboard side
of the seat.
To adjust the seat, do any of the following:
Move the seat forward or rearward by sliding
the control forward or rearward.
Raise or lower the front part of the seat cushion
by moving the front of the control up or down.
Raise or lower the rear part of the seat cushion
by moving the rear of the control up or down.
Manual Lumbar
On vehicles with this
feature, the handle is
located on the outboard
side of the seat.
Move the handle up repeatedly to decrease
lumbar support. Move the handle down repeatedly
to increase lumbar support.
9
ProCarManuals.com
Page 10 of 406
Reclining Seatbacks
Manual Reclining Seatbacks
{CAUTION:
You can lose control of the vehicle if you
try to adjust a manual driver’s seat while
the vehicle is moving. The sudden
movement could startle and confuse you,
or make you push a pedal when you do
not want to. Adjust the driver’s seat only
when the vehicle is not moving.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
On seats with manual reclining seatbacks, the
lever used to operate them is located on the
outboard side of the seat.
10
ProCarManuals.com
Page 11 of 406
To recline the seatback, do the following:
1. Lift the recline lever.
2. Move the seatback to the desired position,
then release the lever to lock the seatback
in place.
3. Push and pull on the seatback to make sure it
is locked.To return the seatback to an upright position, do
the following:
1. Lift the lever fully without applying pressure to
the seatback and the seatback returns to the
upright position.
2. Push and pull on the seatback to make sure it
is locked.
11
ProCarManuals.com
Page 12 of 406
Power Reclining Seatbacks
If the seats have power reclining seatbacks, the
control used to recline them is located on the
outboard side of the seat behind the power seat
control.
To recline the seatback, tilt the top of the
control rearward.
To bring the seatback forward, tilt the top of
the control forward.
{CAUTION:
Sitting in a reclined position when your
vehicle is in motion can be dangerous.
Even if you buckle up, your safety belts
cannot do their job when you are reclined
like this.
The shoulder belt cannot do its job. In a
crash, you could go into it, receiving neck
or other injuries.
The lap belt cannot do its job either. In a
crash the belt could go up over your
abdomen. The belt forces would be there,
not at your pelvic bones. This could cause
serious internal injuries.
For proper protection when the vehicle is
in motion, have the seatback upright.
Then sit well back in the seat and wear
your safety belt properly.
12
ProCarManuals.com
Page 13 of 406
Do not have a seatback reclined if your vehicle is
moving.
Head Restraints
Adjust the head restraint so that the top of the
restraint is at the same height as the top of
the occupant’s head. This position reduces the
chance of a neck injury in a crash.
13
ProCarManuals.com
Page 14 of 406
Pull the restraint up to
raise it. To lower the
head restraint, press the
button, located on the
top of the seatback, and
push the restraint down.
The rear seat head restraints are also adjustable.Power Lift Seat
To adjust a power lift seat up or down:
1. Move the seat forward or rearward to the
desired position.
2. Press the top or bottom of the power lift seat
switch, located on the outboard side of the
driver’s seat, to raise or lower the seat.
SeeManual Seats on page 8.
14
ProCarManuals.com
Page 15 of 406
Rear Seats
Split Folding Rear Seat
With this feature, you can fold either side of the
seatback down for more cargo space. Make
sure the front seat is not reclined. If it is, the rear
seatback will not fold down all the way.
Notice:Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
To lower the rear seatback, pull on the seat tab
located on the outboard side of the seatback
cushion and fold the seatback down. This allows
you direct access to the trunk.
15
ProCarManuals.com
Page 16 of 406
To raise the rear seatback, follow these steps:
1. Raise the seatback up and make sure
it latches.
2. Push and pull on the seatback to be sure it is
locked in position.
3. Make sure that the safety belts are properly
stowed over the seatback in all three
positions.
{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After raising the rear
seatback, always check to be sure that the
safety belts are properly routed and
attached, and are not twisted.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
When the seat is not in use, it should be kept in
the upright locked position.
16
ProCarManuals.com