2007 PONTIAC TORRENT spare wheel

[x] Cancel search: spare wheel

Page 338 of 490

PONTIAC TORRENT 2007  Owners Manual When It Is Time for New Tires.................. 401
Buying New Tires...................................... 401
Different Size Tires and Wheels................ 403
Uniform Tire Quality Grading.........

Page 395 of 490

PONTIAC TORRENT 2007  Owners Manual Tire Pressure Monitor System
Your vehicle has a Tire Pressure Monitor System
(TPMS). This system uses radio and sensor
technology to check tire pressure levels. TPMS
sensors are mounted onto each tire

Page 400 of 490

PONTIAC TORRENT 2007  Owners Manual Do not include the compact spare tire in your tire
rotation.
After the tires have been rotated, adjust the
front and rear in�ation pressures as shown on
the Tire and Loading Information label. See
In�

Page 402 of 490

PONTIAC TORRENT 2007  Owners Manual {CAUTION:
Mixing tires could cause you to lose
control while driving. If you mix tires of
different sizes, brands, or types (radial
and bias-belted tires), the vehicle may not
handle properly, and you

Page 403 of 490

PONTIAC TORRENT 2007  Owners Manual Different Size Tires and Wheels
If you add wheels or tires that are a different size
than your original equipment wheels and tires,
this may affect the way your vehicle performs,
including its braking

Page 409 of 490

PONTIAC TORRENT 2007  Owners Manual When your vehicle has a �at tire, use the following
example as a guide to assist you in the placement
of wheel blocks.
The following information will tell you next how to
use the jack and change a tir

Page 410 of 490

PONTIAC TORRENT 2007  Owners Manual 2. Remove the nut retaining the spare tire.
3. Remove the compact spare tire. SeeCompact
Spare Tire on page 420for more information.
4. Locate the jack and wheel wrench, which are
located on the drive

Page 411 of 490

PONTIAC TORRENT 2007  Owners Manual Removing the Flat Tire and
Installing the Spare Tire
You must take off the wheel cover or center cap, if
the vehicle has one, to reach the wheel bolts.
1. Loosen all �ve
plastic caps by
turning the wh
Page:   1-8 9-16 17-24 next >