REMOTE KEYLESS ENTRY SYSTEM
(if so equipped)
LOCK DOORS
Press the LPD0150 button to lock all doors.
UNLOCK DOORS
Press the
lpd0151
button once to unlock the driver’s
door only. Press the button again within 5
seconds to unlock all doors.U SING THE PANIC ALARM
Press and hold the button for longer than 0.5 seconds. The panic alarm will
sound and the headlights will stay on for 25 seconds. The panic alarm stops
when it has run for 25 seconds, or when any button is pressed on the keyfob.
S ILENCING THE HORN BEEP FEATURE
To deactivate – Press and hold the LPD0150 and
lpd0151
buttons for at least 2 seconds.
To activate – Press and hold the LPD0150 and
lpd0151
buttons for at least 2 seconds once more.
INTELLIGENT KEY SYSTEM (if so equipped)
This system allows you to lock or unlock your vehicle and
start the engine with an Intelligent Key unit which may be
carried in a pocket or purse.
NOTE
: It’s important to make sure the Intelligent Key is
“on your person” (i.e., pocket or purse) when locking or
unlocking the doors.
The operating range of the door and hatchback/trunk
lock/unlock function is approximately 31 in (0.8 m).
Locking the vehicle - Push any door handle request
switch 01 once.
Unlocking the vehicle - Push any door handle request
switch 01 once. The corresponding door will unlock.
Push the door handle request switch 01 again within
1 minute; all other doors will unlock.
OPENING THE REAR HATCH (if so equipped)
Push the rear hatch door request switch 02.
Push the release switch 03 under the rear hatch handle.
Pull up and out on the handle to open rear hatch.
OPENING THE TRUNK (if so equipped)
Push the trunk request switch 02.
Push the release switch 03 under the trunk handle.
Pull up and out on the handle to open the trunk.
02
03
01
02
03
XTRONIC CONTINUOUSLY VARIABLE
TRANSMISSION (CVT) ™ (if so equipped)
The Xtronic CVT™ does not produce a gear change sensation like traditional automatic transmissions.
R (Reverse) speed, for CVT vehicles, is limited to 15 MPH (25 km/h).
STARTING THE ENGINE WITH CVT (Intelligent Key models only)
Push the ignition knob in.
Confirm the Intelligent Key warning light is illuminated green.
Turn the ignition knob to start the engine.
TURNING THE ENGINE OFF WITH CVT (Intelligent Key models only)
Shift transmission into P (Park).
Turn ignition knob to LOCK position.
OVERDRIVE (O/D) OFF SWITCH
Each time your vehicle is started, the transmission is automatically “reset” to Overdrive on.
To turn Overdrive mode off, push the O/D OFF switch 01. The
LCN0030
O/DOFF light in the instrument panel will illuminate.
Use the Overdrive off mode when you need improved engine braking.
The transmission in your Versa requires a special fluid (NS-2) available only at your NISSAN dealer. No other fluid will meet the exact requirements of the new Xtronic CVT™.
6-SPEED MANUAL TRANSMISSION (if so equipped)
LOCK OUT
In 6-speed manual transmission equipped vehicles, the shift lever is equipped with a Reverse lock-out feature that prevents accidental selection of Reverse (instead of 1st gear).
SHIFTING TO REVERSE
Lift up on the collar just below the shift lever, then move it to the left and up into Reverse.
PUSH RELEASE BUTTON (Intelligent Key Models with Manual Transmission only)
The ignition knob can only be turned to the LOCK position when the PUSH release button 01 has been pressed.
The LCN0129
LOCK Intelligent Key lock warning light blinks and the buzzer sounds if the PUSH release button has not been pressed completely when the ignition knob is turned to
the LOCK position.
01
01
