2007 NISSAN MAXIMA ECO mode

[x] Cancel search: ECO mode

Page 119 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual 3 Pre-driving checks and adjustments
Keys .............................................3-2
Intelligent Keys.................................3-2
NISSAN vehicle immobilizer system keys..........3-3
Door

Page 133 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual Silencing the horn beep feature
If desired, the horn beep feature can be deacti-
vated using the Intelligent Key.
NOTE:
If you change the horn beep and lamp flash
feature with the keyfob, the display

Page 137 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual TRUNK LID RELEASE SWITCH
The trunk lid release switch is located below the
armrest of the driver’s door trim panel. To open
the trunk lid, pull the trunk lid release switch.
To close the trunk lid,

Page 153 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual 1. TRIP INFO button (P. 4-3)
2. CLOCK DISP button (P. 4-5)
3.
AUDIO button (P. 4-5)
When you use this system, make sure the engine
is running.
If you use the system with the engine not
running (igniti

Page 154 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual Average speed (MPH or km/h)
The Average Speed mode shows the average
speed since the last reset. To calculate the aver-
age speed, driving distance is divided by driving
time.
For approximately the fi

Page 155 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual CLOCK
The digital clock displays the time when the igni-
tion key is in OFF, ACC or ON. To enable the
clock display, press the CLOCK DISP button.
If the power supply is disconnected, the
clock will no

Page 157 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual *For Navigation system control buttons, refer to
the separate Navigation System Owner’s
Manual.
When you use this system, make sure the engine
is running.
If you use the system with the engine not
r

Page 158 of 336

NISSAN MAXIMA 2007 A34 / 6.G Owners Manual cAverage Speed - Average speed driven
(MPH or km/h) since the last reset.
Resetting trip 1 and trip 2
Each trip screen can be reset to 0. Press the TRIP
button to select the TRIP screen to be reset.
c
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 48 next >