2007 NISSAN FRONTIER maintenance

[x] Cancel search: maintenance

Page 279 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual Incorrect tire pressure, including un-
der inflation, may adversely affect
tire life and vehicle handling.
WARNING
cImproperly inflated tires can fail
suddenly and cause an accident.
cThe Gross Vehicl

Page 280 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual Tire and loading information label
s1Seating capacity: The maximum num-
ber of occupants that can be seated
in the vehicle.
s2Vehicle load limit: See loading infor-
mation in the “Technical and con-

Page 281 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual Checking tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge squarely
onto the valve stem. Do not press too
hard or force the valve stem side-
ways, or air will escap

Page 282 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the
sidewall of all tires. This information iden-
tifies and describes the fundamental
characteristics of the

Page 283 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual s2TIN (Tire Identification Number) for a
new tire (example: DOT XX XX XXX
XXXX)
1. DOT: Abbreviation for the9Depart-
ment Of Transportation.9The symbol
can be placed above, below or to the
left or rig

Page 284 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual s7The word “radial”
The word “radial” is shown if the tire has
radial structure.
s8Manufacturer or brand name
Manufacturer or brand name is shown.
Other Tire-related Terminology
In addition to

Page 285 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual studded tires. Skid and traction capabilities of
studded snow tires on wet or dry surfaces may be
poorer than that of non-studded snow tires.
TIRE CHAINS
Use of tire chains may be prohibited according

Page 286 of 336

NISSAN FRONTIER 2007 D22 / 1.G Owners Manual Wheel nut tightening torque:
98 ft-lb (133 N·m)
The wheel nuts must be kept tight-
ened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire ro