2007 NISSAN ALTIMA HYBRID engine

[x] Cancel search: engine

Page 276 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual 5. Remove the drain plugsBwith a wrench by
turning it counterclockwise and completely
drain the oil.
If the oil filter is to be changed, remove and
replace it at this time. See “Changing engine
oil

Page 277 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual CAUTION
Be careful not to burn yourself. The engine
oil may be hot.
5. Wipe the engine oil filter sealing surface with
a clean rag.
Be sure to remove any old gasket material
remaining on the sealing s

Page 278 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual BRAKE FLUID
Check the brake fluid level in the reservoir. If the
fluid level is below the MIN line or the brake
warning light comes on, add Genuine NISSAN
Super Heavy Duty Brake Fluid or equivalentDOT

Page 279 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual The 12-volt battery is located on the right hand
side of the trunk behind an access panel.
cKeep the battery surface clean and dry.
Clean the battery with a solution of baking
soda and water.
cMake ce

Page 280 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual 2. Have the belt checked regularly for condi-
tion and tension in accordance with the
maintenance schedule found in the
“NISSAN Service and Maintenance Guide”.
REPLACING SPARK PLUGS
Iridium-tipped

Page 281 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual The air cleaner filter should not be cleaned and
reused. Replace it according to the maintenance
log shown in the “NISSAN Service and Mainte-
nance Guide.” When replacing the filter, wipe the
insi

Page 283 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual If the brakes do not operate properly, have the
brakes checked by a NISSAN dealer.
SELF-ADJUSTING BRAKES
Your vehicle is equipped with self-adjusting
brakes.
The front and rear disc-type brakes self-a

Page 284 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual If a type A fuse is used to replace a type B fuse,
the type A fuse will not be level with the fuse
pocket as shown in the illustration. This will not
affect the performance of the fuse. Make sure the