2007 NISSAN ALTIMA HYBRID engine

[x] Cancel search: engine

Page 219 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual 5 Starting and driving
Precautions when starting and driving................5-2
Exhaust gas (carbon monoxide)..................5-2
Three-way catalyst..............................5-3
Tire Pressure Mon

Page 220 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual WARNING
cDo not leave children or adults who
would normally require the assistance
of others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
oth

Page 221 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual c. You notice a change in the sound of
the exhaust system.
d. You have had an accident involving
damage to the exhaust system, un-
derbody, or rear of the vehicle.
THREE-WAY CATALYST
The three-way cat

Page 226 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual If the battery of the Intelligent Key is almost dis-
charged, the guide light
sAof the Intelligent Key
port blinks and the indicator appears on the ve-
hicle information display. See “Vehicle inform

Page 227 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual If the engine fails to start using a registered key
(for example, when interference is caused by
another registered key, an automated toll road
device or automatic payment device on the key
ring) , re

Page 228 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual cWhen the Hybrid System is started or
stopped, you may hear a sound coming
from the high voltage battery located un-
der the rear seats. This does not indicate
a problem.
cWhen the Hybrid System is st

Page 230 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual The brake pedal must be depressed to
move the selector lever from N (Neutral) or
any drive position to P (Park) .Apply the
parking brake. When parking on a hill, apply the
parking brake first, then sh

Page 231 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual To move the shift selector lever, complete the
following procedure:
1. Push the ignition switch to the LOCK posi-
tion.
2. Apply the parking brake.
3. Remove the shift lock release cover as
shown.
4.