FRONT WIPER AND WASHER SYSTEM
WW-35
C
D
E
F
G
H
I
J
L
MA
B
WW
Revision: 2006 November2007 350Z
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
After installation, add water up to the upper level of washer tank inlet, and check for water leaks.
Removal and Installation of Washer PumpNKS0052W
REMOVAL
1. Remove fender protector. Refer to EI-21, "FENDER PROTEC-
TOR" .
2. Disconnect washer pump connector and remove washer tube.
3. Pull out washer pump in direction shown by the arrow ( ) in the
figure. Remove washer pump from washer tank.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
When installing washer pump, there should be no packing twists, etc.Washer tank mounting bolt and nuts : 5.7 N·m (0.58 kg-m, 50 in-lb)
PKIA3705E
