EI-40
LUGGAGE FLOOR TRIM
Revision: 2006 November2007 350Z
LUGGAGE FLOOR TRIM
Removal
1. Remove back door welt. Refer to EI-47, "BACK DOOR" .
2. Remove luggage floor carpet.
3. Remove spare tire cover.
4. Remove luggage finisher lower (center).
5. Remove luggage side finisher upper (RH/LH).
6. Remove strut cover upper (RH/LH).
7. Remove strut cover rear.
8. Remove clip of luggage side finisher lower and remove luggage side finisher lower.
9. Remove strut cover front.
10. Remove strut cover upper (center).
11. Remove clip of strut cover lower (RH/LH) and remove strut cover lower.
12. Remove strut cover lower (center).
Installation
Install in the reverse order of removal.
REAR FLOOR BOX
Removal
1. Remove kicking plate inner. Refer to EI-35, "BODY SIDE TRIM" .
2. Remove body side welt. Refer to EI-35, "
BODY SIDE TRIM" .
3. Remove rear side finisher. Refer to EI-35, "
BODY SIDE TRIM" .
4. Remove console box. Refer to IP-10, "
INSTRUMENT PANEL ASSEMBLY" .
5. Remove screw of rear floor box and remove rear floor box.
6. Remove pins of rear floor box lid and remove rear floor box lid.
7. Remove luggage floor finisher mask.
8. Remove screws of rear floor box lock and remove rear floor box lock.
9. Remove tray.
Installation
Install in the reverse order of removal.
CAUTION:
To install, check if all clips are matched over holes panel on vehicle, then push on.
1. Luggage finisher lower (center) 2. Luggage side finisher lower (RH) 3. Luggage side finisher lower (LH)
4. Luggage side finisher upper (RH) 5. Luggage side finisher upper (LH) 6. Trunk side box
7. Tool box 8. Luggage floor carpet 9. Spare tire cover
10. Strut cover rear 11. Strut cover upper (RH) 12. Strut cover upper (center)
13. Strut cover upper (LH) 14. Strut cover lower (RH) 15. Strut cover lower (center)
16. Strut cover lower (LH) 17. Strut cover front 18. Luggage floor finisher upper (rear)
19. Luggage floor finisher upper (front) 20. Rear parcel box 21. Rear parcel escutcheon
22. Luggage floor finisher lower 23. Rear floor box lid 24. Luggage floor finisher mask
25. Rear floor box striker 26. Rear floor box 27. Rear floor box mat
28. Tray Clip Pawl
Metal clip
TRUNK ROOM TRIM & TRUNK LID FINISHER
EI-49
C
D
E
F
G
H
J
K
L
MA
B
EI
Revision: 2006 November2007 350Z
TRUNK ROOM TRIM & TRUNK LID FINISHERPFP:84920
Removal and Installation (for Roadstar Models)NIS0008Z
TRUNK ROOM TRIM
Removal
1. Remove trunk lid weatherstrip. Refer to BL-113, "Removal and Installation of Trunk Lid Weatherstrip" .
2. Remove trunk floor carpet.
3. Remove spare tire cover.
4. Remove trunk lid release lever from trunk rear finisher.
5. Remove clips and remove trunk rear finisher.
6. Remove clips of trunk front finisher and remove trunk front finisher.
7. Remove trunk side box.
8. Remove clips and remove tool box.
Installation
Install in the reverse order of removal.
1. Trunk front finisher 2. Trunk side box 3. Trunk rear finisher
4. Tool box 5. Trunk floor carpet 6. Spare tire cover
PIIA7625E
