2007 NISSAN 350Z EC-60

INDEX FOR DTC
EC-11
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2006 November2007 350ZP1148 1148 CLOSED LOOP-B1EC-540
P1168 1168 CLOSED LOOP-B2EC-540
P1211 1211 TCS C/U FUNCTNEC-541
P1212 1212 TCS/CIRCEC-542
P1217 1217 ENG OVER TEMPEC-543
P1225 1225 CTP LEARNING-B1EC-557
P1226 1226 CTP LEARNING-B1EC-559
P1233 1233 ETC FUNCTION/CIRC-B2EC-561
P1234 1234 CTP LEARNING-B2EC-557
P1235 1235 CTP LEARNING-B2EC-559
P1236 1236 ETC MOT-B2EC-571
P1238 1238 ETC ACTR-B2EC-580
P1239 1239 TP SENSOR-B2EC-582
P1290 1290 ETC MOT PWR-B2EC-592
P1421 1421 COLD START CONTROLEC-600
P1564 1564 ASCD SWEC-602
P1572 1572 ASCD BRAKE SWEC-610
P1574 1574 ASCD VHL SPD SENEC-625
P1610 - P1615 1610 - 1615 NATS MALFUNCTIONEC-46
P1715 1715 IN PULY SPEEDEC-627
P1730 1730 A/T INTERLOCKAT- 1 4 1
P1752 1752 I/C SOLENOID/CIRCAT- 1 4 5
P1757 1757 FR/B SOLENOID/CIRCAT- 1 4 7
P1762 1762 D/C SOLENOID/CIRCAT- 1 4 9
P1767 1767 HLR/C SOL/CIRCAT- 1 5 1
P1772 1772 LC/B SOLENOID/CIRCAT- 1 5 3
P1774 1774 LC/B SOLENOID FNCTAT- 1 5 5
P1805 1805 BRAKE SW/CIRCUITEC-628
P2100 2100 ETC MOT PWR-B1EC-592
P2101 2101 ETC FUNCTION/CIRC-B1EC-561
P2103 2103 ETC MOT PWREC-592
P 2 11 8 2 11 8 E T C M O T- B 1EC-571
P 2 11 9 2 11 9 E T C A C T R - B 1EC-580
P2122 2122 APP SEN 1/CIRCEC-633
P2123 2123 APP SEN 1/CIRCEC-633
P2127 2127 APP SEN 2/CIRCEC-641
P2128 2128 APP SEN 2/CIRCEC-641
P2132 2132 TP SEN 1/CIRC-B2EC-361
P2133 2133 TP SEN 1/CIRC-B2EC-361
P2135 2135 TP SENSOR-B1EC-582
P2138 2138 APP SENSOREC-650
DTC*1
Items
(CONSULT-III screen terms)Reference page
CONSULT-III
GST*
2ECM*3

INDEX FOR DTC
EC-13
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2006 November2007 350Z
Alphabetical IndexNBS00028
NOTE:

If DTC U1000 or U1001 is displayed with other DTC, first perform the trouble diagnosis for DTC
U1000, U1001. Refer to EC-151, "
DTC U1000, U1001 CAN COMMUNICATION LINE" .

If DTC U1010 is displayed with other DTC, first perform the diagnosis for DTC U1010.
Refer to EC-154, "
DTC U1010 CAN COMMUNICATION" .
Items
(CONSULT-III screen terms)DTC*
1
Reference page
CONSULT-III
GST*
2ECM*3
A/F SEN1 HTR (B1) P0031 0031EC-165
A/F SEN1 HTR (B1) P0032 0032EC-165
A/F SEN1 HTR (B2) P0051 0051EC-165
A/F SEN1 HTR (B2) P0052 0052EC-165
A/F SENSOR1 (B1) P0130 0130EC-248
A/F SENSOR1 (B1) P0131 0131EC-257
A/F SENSOR1 (B1) P0132 0132EC-266
A/F SENSOR1 (B1) P0133 0133EC-275
A/F SENSOR1 (B1) P2A00 2A00EC-659
A/F SENSOR1 (B2) P0150 0150EC-248
A/F SENSOR1 (B2) P0151 0151EC-257
A/F SENSOR1 (B2) P0152 0152EC-266
A/F SENSOR1 (B2) P0153 0153EC-275
A/F SENSOR1 (B2) P2A03 2A03EC-659
A/T 1ST GR FNCTN P0731 0731AT- 11 5
A/T 2ND GR FNCTN P0732 0732AT- 11 7
A/T 3RD GR FNCTN P0733 0733AT- 11 9
A/T 4TH GR FNCTN P0734 0734AT- 1 2 1
A/T 5TH GR FNCTN P0735 0735AT- 1 2 3
A/T INTERLOCK P1730 1730AT- 1 4 1
A/T TCC S/V FNCTN P0744 0744AT- 1 2 7
APP SEN 1/CIRC P2122 2122EC-633
APP SEN 1/CIRC P2123 2123EC-633
APP SEN 2/CIRC P2127 2127EC-641
APP SEN 2/CIRC P2128 2128EC-641
APP SENSOR P2138 2138EC-650
ASCD BRAKE SW P1572 1572EC-610
ASCD SW P1564 1564EC-602
ASCD VHL SPD SEN P1574 1574EC-625
ATF TEMP SEN/CIRC P0710 0710AT- 1 3 4
BRAKE SW/CIRCUIT P1805 1805EC-628
CAN COMM CIRCUIT U1000
1000*4EC-151
CAN COMM CIRCUIT U1001
1001*4EC-151
CKP SEN/CIRCUIT P0335 0335EC-386
CLOSED LOOP-B1 P1148 1148EC-540
CLOSED LOOP-B2 P1168 1168EC-540
CMP SEN/CIRC-B1 P0340 0340EC-394

EC-14
INDEX FOR DTC
Revision: 2006 November2007 350Z
CMP SEN/CIRC-B2 P0345 0345EC-394
COLD START CONTROL P1421 1421EC-600
CONTROL UNIT(CAN) U1010 1010EC-154
CTP LEARNING-B1 P1225 1225EC-557
CTP LEARNING-B1 P1226 1226EC-559
CTP LEARNING-B2 P1234 1234EC-557
CTP LEARNING-B2 P1235 1235EC-559
CYL 1 MISFIRE P0301 0301EC-371
CYL 2 MISFIRE P0302 0302EC-371
CYL 3 MISFIRE P0303 0303EC-371
CYL 4 MISFIRE P0304 0304EC-371
CYL 5 MISFIRE P0305 0305EC-371
CYL 6 MISFIRE P0306 0306EC-371
D/C SOLENOID/CIRC P1762 1762AT-149
ECM P0605 0605EC-512
ECM BACK UP/CIRCUIT P0603 0603EC-508
ECT SEN/CIRC P0117 0117EC-223
ECT SEN/CIRC P0118 0118EC-223
ECT SENSOR P0125 0125EC-239
ENG OVER TEMP P1217 1217EC-543
EOT SEN/CIRC P0197 0197EC-223
EOT SEN/CIRC P0198 0198EC-223
EOT SENSOR P0196 0196EC-352
ETC ACTR-B1 P2119 2119EC-580
ETC ACTR-B2 P1238 1238EC-580
ETC FUNCTION/CIRC-B1 P2101 2101EC-561
ETC FUNCTION/CIRC-B2 P1233 1233EC-561
ETC MOT PWR P2103 2103EC-592
ETC MOT PWR-B1 P2100 2100EC-592
ETC MOT PWR-B2 P1290 1290EC-592
ETC MOT-B1 P2118 2118EC-571
ETC MOT-B2 P1236 1236EC-571
EVAP GROSS LEAK P0455 0455EC-475
EVAP PURG FLOW/MON P0441 0441EC-411
EVAP SMALL LEAK P0442 0442EC-416
EVAP SYS PRES SEN P0451 0451EC-450
EVAP SYS PRES SEN P0452 0452EC-456
EVAP SYS PRES SEN P0453 0453EC-465
EVAP VERY SML LEAK P0456 0456EC-482
EX V/T MGT/RTDR-B1 P0078 0078EC-190
EX V/T MGT/RTDR-B2 P0084 0084EC-190
EXH TIM SEN/CIR-B1 P1078 1078EC-528
Items
(CONSULT-III screen terms)DTC*
1
Reference page
CONSULT-III
GST*
2ECM*3

AUTOMATIC SPEED CONTROL DEVICE (ASCD)
EC-31
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2006 November2007 350Z
COAST OPERATION
When the SET/COAST switch is pressed during cruise control driving, decrease vehicle set speed until the
switch is released. And then ASCD will keep the new set speed.
RESUME OPERATION
When the RESUME/ACCELERATE switch is pressed after cancel operation other than pressing MAIN switch
is performed, vehicle speed will return to last set speed. To resume vehicle set speed, vehicle condition must
meet following conditions.

Brake pedal is released

Clutch pedal is released (M/T models)

A/T selector lever is in other than P and N positions (A/T models)

Vehicle speed is greater than 40 km/h (25 MPH) and less than 144 km/h (89 MPH)
Component DescriptionNBS0002N
ASCD STEERING SWITCH
Refer to EC-602
ASCD BRAKE SWITCH
Refer to EC-610 and EC-671 .
ASCD CLUTCH SWITCH
Refer to EC-610 and EC-671 .
STOP LAMP SWITCH
Refer to EC-610 , EC-628 and EC-671 .
ELECTRIC THROTTLE CONTROL ACTUATOR
Refer to EC-561 , EC-571 , EC-580 and EC-592 .
ASCD INDICATOR
Refer to EC-681 .

ON BOARD DIAGNOSTIC (OBD) SYSTEM
EC-51
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2006 November2007 350ZEXH TIM SEN/CIR-B1 P1078 1078 — — 2×EC-528
EXH TIM SEN/CIR-B2 P1084 1084 — — 2×EC-528
CLOSED LOOP-B1 P1148 1148 — — 1×EC-540
CLOSED LOOP-B2 P1168 1168 — — 1×EC-540
TCS C/U FUNCTN P1211 1211 — — 2 —EC-541
TCS/CIRC P1212 1212 — — 2 —EC-542
ENG OVER TEMP P1217 1217 — — 1×EC-543
CTP LEARNING-B1 P1225 1225 — — 2 —EC-557
CTP LEARNING-B1 P1226 1226 — — 2 —EC-559
ETC FUNCTION/CIRC-B2 P1233 1233 — — 1×EC-561
CTP LEARNING-B2 P1234 1234 — — 2 —EC-557
CTP LEARNING-B2 P1235 1235 — — 2 —EC-559
ETC MOT-B2 P1236 1236 — — 1×EC-571
ETC ACTR-B2 P1238 1238 — — 1×EC-580
TP SENSOR-B2 P1239 1239 — — 1×EC-582
ETC MOT PWR-B2 P1290 1290 — — 1×EC-592
COLD START CONTROL P1421 1421 — — 2×EC-600
ASCD SW P1564 1564 — — 1 —EC-602
ASCD BRAKE SW P1572 1572 — — 1 —EC-610
ASCD VHL SPD SEN P1574 1574 — — 1 —EC-625
NATS MALFUNCTIONP1610 -
P16151610 - 1615 — — 2 —EC-46
IN PULY SPEED P1715 1715 — — 2 —EC-627
A/T INTERLOCK P1730 1730 — — 1×AT- 1 4 1
I/C SOLENOID/CIRC P1752 1752 — — 1×AT- 1 4 5
FR/B SOLENOID/CIRC P1757 1757 — — 1×AT- 1 4 7
D/C SOLENOID/CIRC P1762 1762 — — 1×AT- 1 4 9
HLR/C SOL/CIRC P1767 1767 — — 1×AT- 1 5 1
LC/B SOLENOID/CIRC P1772 1772 — — 1×AT- 1 5 3
LC/B SOLENOID FNCT P1774 1774 — — 1×AT- 1 5 5
BRAKE SW/CIRCUIT P1805 1805 — — 2 —EC-628
ETC MOT PWR-B1 P2100 2100 — — 1×EC-592
ETC FUNCTION/CIRC-B1 P2101 2101 — — 1×EC-561
ETC MOT PWR P2103 2103 — — 1×EC-592
ETC MOT-B1 P2118 2118 — — 1×EC-571
ETC ACTR-B1 P2119 2119 — — 1×EC-580
APP SEN 1/CIRC P2122 2122 — — 1×EC-633
APP SEN 1/CIRC P2123 2123 — — 1×EC-633
APP SEN 2/CIRC P2127 2127 — — 1×EC-641
APP SEN 2/CIRC P2128 2128 — — 1×EC-641
TP SENSOR2/CIRC-B2 P2132 2132 — — 1×EC-361
TP SENSOR2/CIRC-B2 P2133 2133 — — 1×EC-361
TP SENSOR-B1 P2135 2135 — — 1×EC-582
Items
(CONSULT-III screen terms)DTC*
1
SRT codeTest value/
Test limit
(GST only)TripMIL lighting
upReference
page CONSULT-III
GST*
2ECM*3

EC-60
ON BOARD DIAGNOSTIC (OBD) SYSTEM
Revision: 2006 November2007 350Z
Downshift to a lower gear if the engine is not running smoothly, or if you need to accelerate.
Do not exceed the maximum suggested speed (shown below) in any gear. For level road driving, use the high-
est gear suggested for that speed. Always observe posted speed limits and drive according to the road condi-
tions to ensure sage operation. Do not over-rev the engine when shifting to a lower gear as it may cause
engine damage or loss of vehicle control.
TEST VALUE AND TEST LIMIT (GST ONLY — NOT APPLICABLE TO CONSULT-III)
The following is the information specified in Service $06 of SAE J1979.
The test value is a parameter used to determine whether a system/circuit diagnostic test is OK or NG while
being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the
maximum or minimum value and is compared with the test value being monitored.
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID) and can be dis-
played on the GST screen.
Gear km/h (MPH)
1st 65 (40)
2nd 106 (66)
3rd 152 (95)
4th —
5th —
6th —
Item Self-diagnostic test item DTCTest value (GST display)
Test limit Conversion
TID CID
CATALYSTThree way catalyst function (Bank 1)P0420 01H 01H Max. 1/128
P0420 02H 81H Min. 1
Three way catalyst function (Bank 2)P0430 03H 02H Max. 1/128
P0430 04H 82H Min. 1
EVAP
SYSTEMEVAP control system (Small leak) P0442 05H 03H Max.
1/128 mm
2
EVAP control system purge flow monitoring P0441 06H 83H Min. 20 mV
EVAP control system (Very small leak) P0456 07H 03H Max.
1/128 mm
2

EC-600
DTC P1421 COLD START CONTROL
Revision: 2006 November2007 350Z
DTC P1421 COLD START CONTROLPFP:23710
DescriptionNBS006TX
ECM controls ignition timing and engine idle speed when engine is started with prewarming up condition.
This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions.
On Board Diagnosis LogicNBS006TY
DTC Confirmation ProcedureNBS006TZ
NOTE:

If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait
at least 10 seconds before conducting the next test.

If DTC P1421 is displayed with other DTC, first perform the trouble diagnosis for other DTC.
TESTING CONDITION:
Before performing the following procedure, confirm that battery voltage is more than 11V at idle.
WITH CONSULT-III
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Select “DATA MONITOR” mode with CONSULT-III.
4. Check that the “COOLAN TEMP/S” indication is between 4°C (39°F) and 36°C (97°F).
If “COOLAN TEMP/S” indication is within the specified value, go to the following step.
If “COOLANT TEMP/S” indication is out of the specified value, cool engine down or warm engine up and
go to step 1.
5. Start engine and let it idle for 5 minutes.
6. Check 1st trip DTC.
7. If 1st trip DTC is detected, go to EC-600, "
Diagnostic Procedure" .
WITH GST
Follow the procedure “WITH CONSULT-III” above.
Diagnostic ProcedureNBS006U0
1. PERFORM IDLE AIR VOLUME LEARNING
Perform EC-77, "
Idle Air Volume Learning" .
Is Idle Air Volume Learning carried out successfully?
Ye s o r N o
Yes >> GO TO 2.
No >> Follow the instruction of Idle Air Volume Learning.
2. CHECK INTAKE SYSTEM
Check for the cause of intake air volume lacking. Refer to the following.

Crushed intake air passage

Intake air passage clogging
OK or NG
OK >> GO TO 3.
NG >> Repair or replace malfunctioning part
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P1421
1421Cold start emission reduction
strategy monitoringECM does not control ignition timing and engine
idle speed properly when engine is started with
prewarming up condition.

Lack of intake air volume

Fuel injection system

ECM

DTC P1421 COLD START CONTROL
EC-601
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2006 November2007 350Z
3. CHECK FUEL INJECTION SYSTEM FUNCTION
Perform EC-324, "
DTC Confirmation Procedure" for DTC P0171.
OK or NG
OK >> GO TO 4.
NG >> Go to EC-330, "
Diagnostic Procedure" for DTC P0171.
4. PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT-III
1. Turn ignition switch ON.
2. Select “SELF DIAG RESULTS” mode with CONSULT-III.
3. Touch “ERASE”.
4.Perform DTC Confirmation Procedure.
See EC-600, "
DTC Confirmation Procedure" .
5. Is the 1st trip DTC P1421 displayed again?
With GST
1. Turn ignition switch ON.
2. Select Service $04 with GST.
3.Perform DTC Confirmation Procedure.
See EC-600, "
DTC Confirmation Procedure" .
4. Is the 1st trip DTC P1421 displayed again?
Ye s o r N o
Ye s > > G O T O 5 .
No >>INSPECTION END
5. REPLACE ECM
1. Replace ECM.
2. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs.
Refer to BL-152, "
ECM Re-communicating Function" .
3. Perform EC-76, "
VIN Registration" .
4. Perform EC-76, "
Exhaust Valve Timing Control Learning" .
5. Perform EC-77, "
Accelerator Pedal Released Position Learning" .
6. Perform EC-77, "
Throttle Valve Closed Position Learning" .
7. Perform EC-77, "
Idle Air Volume Learning" .
>>INSPECTION END