CLUTCH PIPING
CL-15
D
E
F
G
H
I
J
K
L
MA
B
CL
Revision: 2006 November2007 350Z
CLUTCH PIPINGPFP:30650
Removal and InstallationNCS0000D
Carefully observe the following steps during clutch tube removal and installation.
Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area
with water.
When fixing clutch hose to bracket, align clutch hose metal fit-
tings with bracket positioning emboss and lock plate to secure.
At this time, prevent twisting or damage of clutch hose. In addi-
tion, be careful not to damage clutch hose.
Tighten clutch tube flare nut to the specified torque.
CAUTION:
Be careful not to damage flare nut and clutch tube.
After installation, bleed the clutch hydraulic system. Refer to CL-
7, "Bleeding" .
1. CSC (Concentric Slave Cylinder)
assembly2. Clutch tube 3. Clutch hose
4. Connector 5. Master cylinder assembly 6. Lock plate
Refer to GI-11, "
Components" , for the symbol in the figure.
PCIB1922E
PCIB0681E
