2007 MITSUBISHI LANCER EVOLUTION belt

WIRING HARNESS CONFIGURATION DIAGRAMS
D-27
D-13
D-08
D-09
D-10
D-12
D-28
9
10
Y
Connector colour code
B:Black
Y:Yellow
L:Blue
G:Green
R:Red
BR:Brown
V:Violet
O:Orange
GR:Gray
None: Milk white
B-33
D-18 (1) Cigarette lighter
D-19 (1-B) Cigarette lighter
D-20 (2-B) Ashtray illumination lamp
D-21 (2-B) Cigarette lighter illumination lamp
D-22 (4) Oxygen sensor (Rear)
D-23 (1-B) Parking brake switch
D-26 (2-R) Seat belt pretensioner (RH)
D-27 (2) Fuel gauge unit (Sub)
D-28 (2-R) Seat belt pretensioner (LH)D-29 (1) Floor wiring harness (RH) and fuel wiring
harness combination
D-30 (8) Floor wiring harness (RH) and fuel wiring
harness combination
D-32 (3-B) G sensor (Longitudinal)
D-33 (3-B) G sensor (Lateral)
D-34 (6) Intercooler water spray switch

CIRCUIT DIAGRAMSB-248
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AND SEAT BELT
PRETENSIONER
L.H. drive vehicles

CIRCUIT DIAGRAMSB-250
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AND SEAT BELT
PRETENSIONER
R.H. drive vehicles

INDEX - In order of connector No.C-8
Wiring diagram
page Circuit diagram page Parts name Connector
No.
CC-223Fuel pump relay 1B-54,55,87,95B-23,29
C-224Power window relayB-54,55,158,159,165B-23,29
C-225No connectionB-54,55,78B-23,29
C-226ETACS-ECUB-54,55,105,108,112,113,116,117,118,
119,120,121,122,123,125,126,128,
129,134,136,137,138,140,141,158,
164,165, 170,171,172,173,188,189B-23,29
C-227ETACS-ECUB-125,128,170,172B-23,29
C-228ETACS-ECUB-105,108,112,113,116,117,118,119,
122,123,125,126,128,129,136,137,
140,141,158,159,164,165,170,171,
172,173, 188,189,258B-23,29
C-230Steering wheel sensorB-202,210,218,226,236,246B-23,29
DD-01Door switch (Front:RH)B-108,116,120,121,164B-30,32
D-02Floor wiring harness (RH) and rear door
wiring harness (RH) combinationB-160,166,171,173B-30,32
D-03Room lampB-118,122B-30,32
D-04Wheel speed sensor (Rear:RH)
B-203,211,217,225,233,243B-30,32
D-05Rear room lampB-118,122B-30,32
D-06Door switch (Rear:RH)B-120,121B-30,32
D-08Door switch (Rear:LH)B-120,121B-30,32
D-09Fuel pump and fuel gauge unit (Main)B-93,101,148,152,156B-30,32
D-10Wheel speed sensor (Rear:LH)
B-203,211,217,225,233,243B-30,32
D-12Floor wiring harness (LH) and rear door
wiring harness (LH) combinationB-161,167,171,173B-30,32
D-13Door switch (Front:LH)B-105,112,120,121,158B-30,32
D-15Instrument panel wiring harness and
console wiring harness combinationB-195B-31,32
D-18Cigarette lighterB-195B-31,33
D-19Cigarette lighterB-195B-31,33
D-20Ashtray illumination lampB-195B-31,33
D-21Cigarette lighter illumination lampB-195B-31,33
D-22Oxygen sensor (Rear)B-88,96B-31,33
D-23Parking brake switchB-157,201,209,213,221,232,242B-31,33
D-26Seat belt pretensioner (RH)B-249,251B-31,33

INDEX - In order of connector No.C-9
Wiring diagram
page Circuit diagram page Parts name Connector
No.
DD-27Fuel gauge unit (Sub)B-148,152,156B-31,33
D-28Seat belt pretensioner (LH)B-249,251B-31,33
D-29Floor wiring harness (RH) and fuel
wiring harness combinationB-93,101B-31,33
D-30Floor wiring harness (RH) and fuel
wiring harness combinationB-93,101,148,152,156,203,211,217,
225,233,243B-31,33
D-32G sensor (Longitudinal)B-200,208,213,221,229,239B-31,33
D-33G sensor (Lateral)B-200,208,213,221,229,239B-31,33
D-34Intercooler water spray switchB-257B-31,33
EE-02Remote controlled mirror (LH)B-192,193B-34,36
E-04Spare connector speaker (LH)>B-196B-34,36
E-05Power window motor (Front:LH)B-162,165B-34,36
E-07Power window main switchB-162,163,168,169B-34,36
E-08Door lock actuator (Front:LH)B-170,173B-34,36
E-10Power window motor (Rear:LH)B-161,167B-34,36
E-11Power window sub switch (Rear:LH)B-161,167B-34,36
E-12Door lock actuator (Rear:LH)B-171,173B-34,36
E-13Remote controlled mirror (RH)B-192,193B-34,36
E-16Door lock key cylinder switch (RH)B-170B-35
E-17Door lock key cylinder switch (LH)B-172B-37
E-18Door lock actuator (Front:RH)B-171,172B-35,37
E-19Power window sub switch (Passenger’s
side)B-159,165B-35,37
E-20Power window motor (Front:RH)B-159,168B-35,37
E-21Spare connector speaker (RH)>B-196B-35,37
E-23Door lock actuator (Rear:RH)B-171,173B-35,37
E-24Power window sub switch (Rear:RH)B-160,166B-35,37
E-25Power window motor (Rear:RH)B-160,166B-35,37
FF-01Spare connector (LH)>B-197B-38,39
F-04Luggage compartment lampB-119,123B-38,39
F-05High mounted stop lampB-144,145B-38,39
F-06Defogger ( - )B-185B-38,39

INDEX - In order of parts nameC-19
Wiring diagram
page Circuit diagram page Connector
No. Parts name
PPurge control solenoid valveB-23B-91,99B-11,15
RRadiator fan relayA-09XB-73,102,176,182B-6,8
Rear combination lamp (LH)F-16B-110,114,126,134,138,143,144,145B-38,39
Rear combination lamp (RH)F-09B-111,115,129,134,138,142,144,145B-38,39
Rear fog lamp relayC-219B-54,55,126,129B-23,29
Rear room lampD-05B-118,122B-30,32
Remote controlled mirror (LH)E-02B-192,193B-34,36
Remote controlled mirror (RH)E-13B-192,193B-34,36
Remote controlled mirror switchC-138B-192,193B-21,27
ResistorB-138B-89,97B-13,17
ResistorC-16B-174,180B-18,24
Roof antennaC-141B-196B-21,27
Roof wiring harness (RH) and J/B
combinationC-218B-54,55,118,119,122,123B-23,29
Room lampD-03B-118,122B-30,32
SSeat belt pretensioner (LH)D-28B-249,251B-31,33
Seat belt pretensioner (RH)D-26B-249,251B-31,33
Secondary air control solenoid valveB-142B-91,99B-13,17
Side turn signal lamp (LH)A-02B-134,138B-6,8
Side turn signal lamp (RH)A-01B-135,139B-6,8
Spare connector (for front fog lamp
relay)A-04XB-73,258B-6,8
Spare connector (for front fog lamp
switch)C-101B-258B-20,26
Spare connector (for front fog lamp)A-31B-258B-7,9
Spare connector (for radio)C-104B-196,197B-20,26
Spare connector speaker (LH)>E-04B-196B-34,36
Spare connector speaker (RH)>E-21B-196B-35,37
Spare connector (LH)>F-01B-197B-38,39
Spare connector (RH)>F-08B-197B-38,39
SRS-ECUC-21B-248,249,250,251B-18,24

GENERAL -Precautions Before Service00-18
PRECAUTIONS BEFORE SERVICE
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
1. Items to follow when servicing SRS
(1) Be sure to read GROUP 52B - Supplemental Restraint System (SRS).
For safe operations, please follow the directions and heed all warnings.
(2) Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
The SRS system is designed to retain enough voltage to deploy the air bag even after the battery
has been disconnected. Serious injury may result from unintended air bag deployment if work
is done on the SRS system immediately after the battery cable is disconnected.
(3) Warning labels must be heeded when servicing or handling SRS components. Warning labels
are located in the following locations.
DSun visor
DGlove box
DSRS-ECU
DSteering wheel
DSteering Joint Cover
DAir bag module (driver’s side and front passenger’s side)
DClock spring
DSeat belt with pre-tensioner
(4) Always use the designated special tools and test equipment.
(5) Store components removed from the SRS in a clean and dry place.
The air bag module should be stored on a flat surface and placed so that the pad surface is
facing upward.
Do not place anything on top of it.
(6) Never attempt to disassemble or repair the SRS components (SRS-ECU, air bag module, clock
spring and seat belt with pre-tensioner).
(7) Whenever you finish servicing the SRS, check the SRS warning lamp operation to make sure
that the system functions properly.
(8) Be sure to deploy the air bag before disposing of the air bag module or disposing of a vehicle
equipped with an air bag. (Refer to GROUP 52B - Air Bag Module Disposal Procedures.)
2. Observe the following when carrying out operations on places where SRS components are installed,
including operations not directly related to the SRS air bag.
(1) When removing or installing parts do not allow any impact or shock to the SRS components.
(2) SRS components should not be subjected to heat, so remove the SRS components before drying
or baking the vehicle after painting.
DSRS-ECU, air bag module, clock spring: 93_C or more
DSeat belt with pre-tensioner: 90_C or more
After re-installing them, check the SRS warning lamp operation to make sure that the system
functions properly.

GENERAL -Supplemental Restraint System (SRS)00-21
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
To improve safety, the SRS and seat belts with
pre-tensioner. These systems enhance collision
safety by restraining the front passengers in case
of an accident. The SRS works with the
pre-tensioner simultaneously when a collision is
detected.
The SRS consists of two air bag modules, SRS
air bag control unit (SRS-ECU), SRS warning lamp
and clock spring. The air bags are located in the
center of the steering wheel, above the glove box.
Each air bag has a folded air bag and an inflator
unit. The SRS-ECU under the floor console monitors
the system and has a safing G-sensor and an
analog G-sensor. The warning lamp on theinstrument panel indicates the operational status
of the SRS. The clock spring is installed in the
steering column. The seat belt pre-tensioner is built
into the front seat belt retractor. Only authorized
service personnel should do work on or around
the SRS components and seat belt with
pre-tensioner. Those service personnel should read
this manual carefully before starting any such work.
Extreme care must be used when servicing the
SRS to avoid injury to the service personnel (by
inadvertent deployment of the air bags or
inadvertent operation of the seat belt with
pre-tensioner) or the driver (by rendering the SRS
or the seat belt with pre-tensioner inoperative).
Diagnosis
connectorFront passenger’s
air bag module
Clock spring Driver’s air bag
module
SRS-ECU
SRS warning lamp
Driver’s air bag
Front
passenger’s
air bag
Seat belt with
pre-tensioner