202 Controls in detailRetractable hardtop
Engage the parking brake (
page 54).
Close the luggage cover, see “Luggage
cover” (
page 205).
Close the trunk lid.
Opening (Summer opening feature)
Aim the transmitter eye at an outside
door handle.
The SmartKey must be in close proxim-
ity to the outside door handle.
Press and hold button Œ until the
retractable hardtop is completely
open.
The seat ventilation* for the driver’s
seat switches on. The rear side win-
dows open.
Release button Œ to interrupt pro-
cedure.
Closing (Convenience feature)
Aim the transmitter eye at the outside
door handle.
The SmartKey must be in close proxim-
ity to the outside door handle.
Press and hold button ‹until the
retractable hardtop is completely
closed.
The retractable hardtop and the rear
side windows close.Locking the retractable hardtop after
raising/lowering
If the retractable hardtop is not properly
locked, lock it as follows.
i
Make sure the retractable hardtop is dry be-
fore you open it. Otherwise water may enter the
trunk interior.
Warning!
G
The hardtop is not fully closed and locked or
not fully opened and locked if:
the message K
in operation
appears in the multifunction display
a warning sounds for 10 seconds and
the message K
Lock
retractable roof appears in the mul-
tifunction display when starting to drive
210 Controls in detailDriving systems1Setting current or higher speed
2Setting current or lower speed
3Canceling the cruise control
4Activating the cruise control or resum-
ing to last set speedActivating cruise control
You can activate the cruise control when
the vehicle speed is above
20 mph (30 km/h).
In the following cases you cannot activate
the cruise control:
when you brake
when you have set the parking brake
when the gear selector lever is set to
position P, R, or N
when the ESP
® is switched offSetting current speed
Accelerate or decelerate to the desired
speed.
Briefly lift the cruise control lever in
direction of arrow1 or depress in
direction of arrow2.
The current speed is set.
Remove your foot from the accelerator
pedal.
The cruise control is activated.
The currently set speed appears in the mul-
tifunction display.
Warning!
G
The cruise control brakes automatically so
that the set speed is not exceeded.
Keep in mind that the cruise control is a con-
venience system designed to assist the driv-
er during vehicle operation. The driver is and
must always remain responsible for the ve-
hicle’s speed and for safe brake operation.
i
The vehicle speed displayed in the speedom-
eter can briefly vary from the speed setting for
the cruise control system.
i
On uphill grades, the cruise control may not
be able to maintain the set speed. Once the
grade eases, the set speed will be resumed.
On downhill grades, the cruise control maintains
the set speed by braking with the vehicle’s brake
system. In addition, on longer downhill grades
the automatic transmission will downshift auto-
matically.
211 Controls in detail
Driving systems
Canceling the cruise control
There are several ways to cancel the cruise
control:
Step on the brake pedal.
The cruise control is canceled. The last
set speed is stored for later use.
or
Briefly push the cruise control lever in
direction of arrow3.
The cruise control is canceled. The last
set speed is stored for later use.
i
The last stored speed is canceled when you
turn off the engine.
i
The cruise control switches off automatical-
ly when
you step on the brake pedal
you depress the parking brake pedal
The cruise control also switches off automatical-
ly when
the vehicle speed is below
20 mph (30 km/h) (
page 209)
the ESP
® is in operation or switched off with
the ESP® switch (
page 91)
you move the gear selector lever to
positionN while driving
An acoustic warning sounds and the message
CC Off
appears in the multifunction display for
approximately 5 seconds.
!
Moving the gear selector lever to positionN
while driving cancels the cruise control. Howev-
er, the gear selector lever should not be moved
to positionN while driving except to coast when
the vehicle is in danger of skidding (e.g. on icy
roads).
i
Depressing the accelerator pedal does not
deactivate the cruise control. After brief acceler-
ation (e.g. for passing), the cruise control will re-
sume the last speed set.
212 Controls in detailDriving systemsSetting a higher speed
Lift the cruise control in direction of
arrow1 (
page 210) and hold it
there until the desired speed is
reached.
Release the cruise control lever.
The new speed is set.
Setting a lower speed
Depress the cruise control in direction
of arrow2 (
page 210) and hold it
there until the desired speed is
reached.
Release the cruise control lever.
The new speed is set.Fine adjustment in 1 mph
(Canada: 1 km/h) increments
Faster
Briefly tip the cruise control lever in
direction of arrow1 (
page 210).
Slower
Briefly tip the cruise control lever in
direction of arrow2 (
page 210).Setting to last stored speed
(“Resume” function)
Briefly pull the cruise control lever in
direction of arrow4 (
page 210).
The cruise control resumes to the last
set speed or, if no speed is stored, it
will set and store the current speed.
Remove your foot from the accelerator
pedal.
The selected speed appears in the mul-
tifunction display.
i
When you use the cruise control lever to de-
celerate, the brake system will automatically
brake the vehicle if the engine’s braking power
does not brake the vehicle sufficiently.
Warning!
G
The set speed stored in memory should only
be set again if prevailing road conditions
permit. Possible acceleration or decelera-
tion differences arising from returning to the
preset speed could cause an accident
and/or serious injury to you and others.
215 Controls in detail
Driving systems
Distronic displays in the speedometer
dial
1Red distance warning lamp E
2Set speed
When Distronic is activated, distance
warning lamp1 and the set speed 2 ap-
pear in the speedometer dial.
Switch off Distronic:
when changing from the left to the right
lane if vehicles are moving more slowly
in the left lane
when entering a turn lane or highway off
ramp
in complex driving situations, such as in
highway construction zones
In these situations, Distronic will continue to
maintain the set speed unless deactivated.
Distronic is designed and intended only to
maintain a set speed and keep a set dis-
tance from moving objects in front of your
vehicle.
Warning!
G
The “Resume” function should only be oper-
ated if the driver is fully aware of the previ-
ously set speed and wishes to resume this
particular preset speed.
i
USA only:
This device has been approved by the FCC as a
“Vehicle Radar System”. The radar sensor is in-
tended for use in an automotive radar system
only. Removal, tampering, or altering of the de-
vice will void any warranties, and is not permitted
by the FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
i
Canada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Removal, tampering, or altering of the device will
void any warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in any
non-approved way.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
i
The vehicle speed displayed in the speedom-
eter can briefly vary from the speed setting for
the Distronic.
217 Controls in detail
Driving systems
Distronic menu in the control system
Use the
Distronic
menu to display the
current settings for your Distronic system.
The information shown in the multifunction
display depends on whether the Distronic
system is activated (page 218) or deac-
tivated (
page 220).
Press button è or ÿ repeatedly
until you see one of the following dis-
plays in the multifunction display.Distronic deactivated
When Distronic is deactivated, you will see
the standard display in the left multifunc-
tion display.
1Preceding vehicle, if detected
2Actual distance to preceding vehicle
3Preset distance threshold to preceding
vehicle
4Your vehicle
5Symbol for activated distance warning
functionDistronic activated
When Distronic is activated, the
DTR
sym-
bol and the set speed appear in the left
multifunction display.
1Symbol for activated Distronic
2Set speed
i
For information on the distance warning
function*, see “Distance warning function*”
(
page 224).
218 Controls in detailDriving systemsCruise control lever
The Distronic system is operated by means
of the cruise control lever.
The cruise control lever is the uppermost
lever found on the left-hand side of the
steering column.
1Setting current or higher speed
2Setting current or lower speed
3Deactivate Distronic
4Activating Distronic or resuming at last
set speedActivating Distronic
You can activate Distronic when the vehi-
cle speed is between 20 mph (30 km/h)
and 110 mph (180 km/h).
When Distronic is activated, the left multi-
function display will show a message such
as
DTR 55 mph
.
If Distronic is not activated after the cruise
control lever is pulled, the left multifunc-
tion display will show the message
DTR --- mph
.
In the following cases you cannot activate
Distronic:
up to 2 minutes after starting the en-
gine
when you brake
when you have set the parking brake
when the gear selector lever is set to
positionP, R, or N.
when the ESP
® is switched off1White Distronic indicator lamp E
2Set speed
i
The vehicle speed displayed in the speedom-
eter can briefly vary from the speed setting for
the Distronic.
219 Controls in detail
Driving systems
Setting the current speed
Accelerate or decelerate to the desired
speed.
Briefly lift the cruise control lever in
direction of arrow1 or depress in
direction of arrow2 (
page 218).
Distronic is activated and the current
speed is set.
Remove your foot from the accelerator
pedal.Setting a higher speed
Briefly tip the cruise control lever in
direction of arrow1 (
page 218) to
increase the vehicle speed in incre-
ments of 5 mph (Canada: 10 km/h).
The new speed is set.Setting a lower speed
Briefly tip the cruise control lever in di-
rection of arrow2 (
page 218) to de-
crease the vehicle speed in increments
of 5 mph (Canada: 10 km/h).
The new speed is set.
Fine adjustment in 1 mph
(Canada: 1 km/h) increments
Faster
Briefly pull the cruise control lever in
direction of arrow4 (
page 218).
i
If you do not take your foot off of the accel-
erator but continue to accelerate past the set
speed, the following message will appear in the
multifunction display:
DTR override
.
The distance to slower moving vehicles in front
of you will not be set. Your vehicle speed will
then be determined only by the accelerator
pedal position.
i
Depressing the accelerator pedal does not
deactivate Distronic. After brief acceleration
(e.g. for passing), the cruise control will resume
the last speed set.
i
When you use the cruise control lever to de-
celerate, the brakes will be applied to support
deceleration.
In addition, the transmission will automatically
downshift on long downhill grades.